Does anyone have input as to why cast bullet loads do not chamber consistantly in a .40 S&W?
I am loading 170gr TC cast bullets, seated with the bearing surface/cone base flush with the case mouth.
I use a Lee Factory Crimp die in the last station, and have even made a bullet sizing die to produce bullets of .400" diameter.
Powder is 5.0 gr. WSF with WSP primers.
Thanks for any help.
I am loading 170gr TC cast bullets, seated with the bearing surface/cone base flush with the case mouth.
I use a Lee Factory Crimp die in the last station, and have even made a bullet sizing die to produce bullets of .400" diameter.
Powder is 5.0 gr. WSF with WSP primers.
Thanks for any help.