Just VERY curious....

[M&Pete40c.]

Hey guys New guy here. I'm currentyly waiting to pick up my "new" MP 40c. The problem was that the Cabela's I was at had no more 40c and the only left was the display model. Now foolishly of me I didn't ask if there would be anything wrong with the dry-fire and if there would be any significant problems with the gun, being that it was a display model. Now my question is, is it ok? I mean I know you will only know once it has actually been fired many times but the rear sights looked worn out around the edges already and I'm paying the price as if it was a "new" gun so I'm kind of concerned and could I still ask if they can switch the gun for a real new out-of-the box gun? Thanks guys.

 

[forrestinmathews]

Should be able to get something off on a display model that shows shop wear. Press them on it. Go to a supervisor or dept. manager.

 

[TahoeDust]

I would say the vast majority of guns are bought out of the case unless they are specifically ordered for a customer. I would not be concerned and not expect to get a discount. Most desirable guns like many models of the M&P spend very little time on the shelf.

 

[jstanfield103]

If they had the model in stock they would have sold you a new model, so if you ask for a new model you will probably have to wait. I would not worry a bit about it. S&W has a lifetime warranty and once it is in you're hands and you fire it you will just smile. They are a great gun.

Welcome to the Forum from Kentucky. And good Luck on that new M&P

 

[Jyezahn]

Two things:

1. With the recent run on guns, chances are, the guns in the display cases are brand new, out of the box. If there is stock in the back, you usually will get one from the back. Otherwise, display case is fine, especially with a popular gun like the M&P. Make no mistake, all of them have been handled and live fired prior to leaving the factory.

2. Any Cabela's that I've been in, has trigger locks on all of their guns and will not take them off for you to dry fire. Upon purchase, the lock comes off, gun goes into the box, it's walked to the checkout for you.

 

[M&Pete40c.]

Thanks for the info guys but after having thought about alot, I feel like if I paid for a "new" gun then I should be receiving a new gun, out of the box. Before I pick up my gun I will defintely see one of the dpt managers about it and I don't want to be rude or anything like that but it comes down to personal preference and I prefer a new out of the box gun versus a shelf display. I also felt that it was my responsibility failing to acknowledge how I was going to feel after the clerk told me they ran out and he'd have to give me the shelf model, now I just feel kind of dumbfounded and I realize that if my request for a new gun doesn't go through then I felt would of as if I got a used firearm for the advertised price of a "new" gun. Well I guess we will have to wait and see, thanx again guys.

 

[M&Pete40c.]

Thanks for the info guys but after having thought about alot, I feel like if I paid for a "new" gun then I should be receiving a new gun, out of the box. Before I pick up my gun I will defintely see one of the dpt managers about it and I don't want to be rude or anything like that but it comes down to personal preference and I prefer a new out of the box gun versus a shelf display. I also felt that it was my responsibility failing to acknowledge how I was going to feel after the clerk told me they ran out and he'd have to give me the shelf model, now I just feel kind of dumbfounded and I realize that if my request for a new gun doesn't go through then I would of felt as if I got a used firearm for the advertised price of a "new" gun. Well I guess we will have to wait and see, thanx again guys

 

[TahoeDust]

Dry firing won't hurt it. The more trigger pulls it has gotten the better...they usually get smoother with more pulls. The gun has never been fired and has never been carried. It is not a used gun.

Asking them to discount it because it may have been handled is like asking a store to discount an article of clothing because it has been tried on.

That being said, to each their own and good luck.

ps. Out of curiosity, is this your first gun purchase?

 

[MichiganScott]

Examine the pistol closely. I was going to buy a Browning T-Bolt .22 LR at Cabela's recently. The display model had been dry fired enough to peen the chamber rim and the only one they had in the back had the stock dinged. No offer to cut the price, even though I said I would take the model from the back before i noticed the dings.

At least dry firing is good for a M&P.

 

[Hillbilly77]

Dry firing won't hurt center fire guns.
As you are buying the gun new, if you ever do have a problem with your M&P, they will fix it at no cost to you.


On Smith & Wesson's website:
FAQs - Smith & Wesson

Can I dry fire my S&W handgun?
Q: Can I dry fire my Smith & Wesson?

A: Yes, except for the .22 caliber pistols which includes models 22A, 22S, 422, 2206, 2214, 2213 and 41.

.22 caliber revolvers such as models 17, 43, 63, 317 and 617 also should not be dry fired.

Q: Why can't I dry fire my .22 pistol or revolver?

A: Dry firing a S&W .22 pistol or revolver will cause damage to the firing pin.

P.S.
Welcome to the Forum.

 

[Lost Lake]

Welcome to the zoo!!!

Excellent choice in guns! Did you know a 9mm or .357 barrel will drop right in your 40 and shoot those calibers as well?

I wouldn't worry about it being used, but if it shows any handling marks I'd ask for a discount myself. Make sure it comes with two mags and three backstraps.

.

 

[M&Pete40c.]

Thanks for all the great info guys and yes this is my first pistol that I will own. With all the great info from you guys, even if I ask for a new gun and if they say no, I'd still be excited about my purchase and cant wait to test it out at the range. Thanks again.

 

[Zjnovak]

M&P's, especially the compact and shield models, move very quick. What I mean by that is, it probably hasnt been on the shelf for more than a couple weeks. Its not a used gun, but you can try for a discount.

 

[walkin' trails]

The striker in my 2009 mfg. M&P 45 broke this spring with around 7500 rounds down the pipe. It actually broke while I was dry firing. That said, I can't attribute the break to dry firing but rather to a bad MIM part, of which S&W had apparently experienced enough problems to change the design since my pistol was delivered. I now keep a spare striker assembly on hand just in case it ever happens again ( and it probably won't now that I've spend $55 bucks to buy a spare). S&W did send me a new assembly, but due to back orders on parts, took longer that I liked. All of my handguns, except for the 22s, but including that 45 get a lot of dry firing and I've never ever had another issue.

Even if Cabela's did allow your pistol to be dry fired as a display piece, I doubt that the trigger got pressed enough to cause undue stress or damage to anything. If future dry firing concerns you, get some snap caps for practice.

 

[Jyezahn]

Thanks for the info guys but after having thought about alot, I feel like if I paid for a "new" gun then I should be receiving a new gun, out of the box. Before I pick up my gun I will defintely see one of the dpt managers about it and I don't want to be rude or anything like that but it comes down to personal preference and I prefer a new out of the box gun versus a shelf display. I also felt that it was my responsibility failing to acknowledge how I was going to feel after the clerk told me they ran out and he'd have to give me the shelf model, now I just feel kind of dumbfounded and I realize that if my request for a new gun doesn't go through then I would of felt as if I got a used firearm for the advertised price of a "new" gun. Well I guess we will have to wait and see, thanx again guys

Ever buy a new car? They're all display models unless you order it, and even then, unless you're there when it comes of the trailer, it's been handled. Expect a discount on those? A "new" gun is simply one that hasn't been out of the custody of the manufacturer and retailer.

 

[RussC]

Hey guys New guy here. I'm currentyly waiting to pick up my "new" MP 40c. The problem was that the Cabela's I was at had no more 40c and the only left was the display model. Now foolishly of me I didn't ask if there would be anything wrong with the dry-fire and if there would be any significant problems with the gun, being that it was a display model. Now my question is, is it ok? I mean I know you will only know once it has actually been fired many times but the rear sights looked worn out around the edges already and I'm paying the price as if it was a "new" gun so I'm kind of concerned and could I still ask if they can switch the gun for a real new out-of-the box gun? Thanks guys.

M&P Pete
I bought my Shield 9 as a display from Cabela's and they knocked off $20. Not much but it was the only Shield in town..I have shot 1,500 rounds with zero problems. I figured about 2 million people dry fired the weapon. I look at it as a well broken in ccw.

Russ

 

[S&W Rover]

While it would have been nice to get a pristine M&P, after you take it to the range a few times, there will be a some wear showing on the barrel hood and the sights anyway.

The key thing is that you have the S&W guarantee... by the way, some of the big-box sporting goods stores sell "warranties" at extra cost... these are absolutely not needed with any S&W handgun. If you have a problem, you simply call their 1-800 number, they email you a shipping tag for UPS, and you send it in -- and they fix it for free (and fairly quickly, too).

Agree with earlier posters on dry firing -- not a problem with the new striker design.

These are superb handguns, and great values for the price we pay. I have fitted the Apex parts to make mine a bit better, but that isn't necessary -- the new ones are pretty smooth right out of the box.

Best advice I can give is go get it scuffed up by using it!

 

[N4KVE]

I work at a LGS that does many shows. If we have an untouched gun, we will get it from the box, but if the customer wants a discount on the display model, we won't give one, as we usually have the lowest prices at the show, & we didn't pay less for that particular gun. It has a full warranty. If they want an untouched gun, we tell them to try again when we get our next order. Years ago I bought a Sig 220. The dealer had 8, but I wanted to look at all the test targets. Yup, the gun that everyone fondled for hours had the best target, so I took that gun. 25 years later, & it's as good as new. Actually better than the new 220's Sig makes. Most Shields sold at stores are fondled, as the stores only get 1, or 2 at a time, & employees fondle them too. A little alcohol, & they clean right up. Don't worry. GARY

 

[blujax01]

Ever buy a new car? They're all display models unless you order it, and even then, unless you're there when it comes of the trailer, it's been handled. Expect a discount on those? A "new" gun is simply one that hasn't been out of the custody of the manufacturer and retailer.

As I read this thread this is the exact analogy I had in mind.

"Pardon me, Sir. There are butt impressions on the driver's seat and finger prints on the dashboard. What can you do for me on a discount?"

To the OP, I think I know where you're coming from but "displayed" guns are not like display models of refrigerators or TV's which can take a tremendous amount of abuse by the "Lookie-Lou's".

 

[M&Pete40c.]

Alright guys. I picked her up yesterday. Asked a few questions and the nice outfitter surely guranteed that there was nothing wrong with my gun and that all Smith-wesson guns are backed by their gurantee and the customer service was top notch. I'm very happy with my purchase. I cleaned it once I got it home and I plan on cleaning it once more today after I get some more wipes. I haven't shot any rounds yet; planning on going to the range this weekend and doing some work. I'll let you all know how it goes. Thanks again.