model 41 mainspring help

[vaskeet]

how do you change the mainspring on a model 41 Thanks

 

[armorer951]

The mainspring housing is held in the lower frame by a pin. See attached photo of schematic.

 

[Rowlf]

If you take the grips off part 6542 in the above parts illustration can be lifted off the frame pin by pressing up and out on part 6542. Part 6542 has an angled leg that sits on the frame pin.

 

[vaskeet]

If you take the grips off part 6542 in the above parts illustration can be lifted off the frame pin by pressing up and out on part 6542. Part 6542 has an angled leg that sits on the frame pin.

Thank you very much mainspring now changed. I will see if it helps my light strikes next time at the range