Still very much a work in progress but here are a few groups with my new 4" PC Shield Plus W & W/O MRD

Joined
Feb 9, 2016
Messages
58
Reaction score
20
Still trying to decide will I use iron sights or a MRD on my new 4" PC Shield plus but here are some pictures of it using a M/Red Dot and factory iron sights. Unfortunately the gun prints about 3-3.5" to the left with iron sights and I couldn't adjust them at my gun club so the groups will reflect that. Still I am quite impressed with the accuracy of this gun. I am expecting my XS F8 replacement NTS to arrive tomorrow along with my new Lyman sight drifter. But due to work I will not be able to get back to the range until Saturday at the earliest.

These five are Red Dot targets at 15 yards shot off sand bags. Target pasters are covering bullet holes made while zeroing the MRD.
 

Attachments

  • 20250627_162724 (1).jpg
    20250627_162724 (1).jpg
    896.8 KB · Views: 0
  • 20250627_162734 (2).jpg
    20250627_162734 (2).jpg
    967.5 KB · Views: 0
  • 20250627_162738 (1).jpg
    20250627_162738 (1).jpg
    919.3 KB · Views: 0
  • 20250629_132046~3.jpg
    20250629_132046~3.jpg
    151.7 KB · Views: 0
  • 20250629_143637~3 (3).jpg
    20250629_143637~3 (3).jpg
    150.2 KB · Views: 0
  • 20250627_162742 (1).jpg
    20250627_162742 (1).jpg
    1.3 MB · Views: 0
Register to hide this ad
These are targets shot using factory iron sights again shot off sandbags but at 12 yards. Please bare in mind I am attempting to compensate for the sights being off by aiming at the right edge of the 3" orange stick on target.
 

Attachments

  • 20250725_123815.jpg
    20250725_123815.jpg
    72.9 KB · Views: 0
  • 20250725_132740.jpg
    20250725_132740.jpg
    52.4 KB · Views: 0
Still trying to decide will I use iron sights or a MRD on my new 4" PC Shield plus but here are some pictures of it using a M/Red Dot and factory iron sights. Unfortunately the gun prints about 3-3.5" to the left with iron sights and I couldn't adjust them at my gun club so the groups will reflect that. Still I am quite impressed with the accuracy of this gun. I am expecting my XS F8 replacement NTS to arrive tomorrow along with my new Lyman sight drifter. But due to work I will not be able to get back to the range until Saturday at the earliest.

These five are Red Dot targets at 15 yards shot off sand bags. Target pasters are covering bullet holes made while zeroing the MRD.
I have the same Shield PC as you. You are going to learn to love the 4'' Shield
..they shoot like a full size service pistol and conceal easily if you intend to carry it as a concealed carry weapon!
 
I had one. It became two. Then it was four.

Two 4" barreled 9MM, one 3.1" 9MM and one "transitioning to .357 SIG or .40 S&W. That one is functional, but not complete yet.

I feel no need for a Compact/subcompact 9MM because the Shield Plus is smaller with the same capacity.
 
Back
Top