A NEW TOOL - MADE IN USA - WORKS QUITE WELL!

Joined
Apr 4, 2006
Messages
19,310
Reaction score
30,234
Just what I needed - a new tool! LOL :D I saw these pliers online and had to have them. They are flush cut Nippers made in the USA by Klein Tools. They cost me a whopping $12 Buck's and they really work quite well!! They are spring loaded and are useful for any lightweight (up to 16 Ga wire) cutting that you want perfectly flush. I use Nylon Zip Ties all the time and with a regular pair of Diagonal Pliers there is always a left over piece sticking out that is sharp. This tool cuts them perfectly smooth and flush. They are also great for cutting plastics, plastic sprue, thin gauge wires, threads, leather, etc. Great for leather working!

Snap-on make a big bulky pair that are too bulky for fine work and a bit heavy - although they do work well on large items they also cost about $70 Buck's. :( Just figured I'd give you guys the heads up in case you could use them. BTW, I bought them online from Home Depot. I do not trust Amazon for tools as many of what they sell are counterfeit Chinese knock-offs. Been there, done that!

Like I said, I need another pair of pliers like I need a hole in my head, (two drawers full - not including what I've got in my vehicles) as you can see!

Klein Model #D275-5
 

Attachments

  • IMG_5864.jpg
    IMG_5864.jpg
    97.9 KB · Views: 337
  • IMG_5865.jpg
    IMG_5865.jpg
    98.5 KB · Views: 245
  • IMG_5866.jpg
    IMG_5866.jpg
    85.9 KB · Views: 277
  • IMG_5867.jpg
    IMG_5867.jpg
    114.7 KB · Views: 258
  • IMG_5868.jpg
    IMG_5868.jpg
    110.4 KB · Views: 186
Last edited:
Register to hide this ad
Nice collection of pliers ya got there!

I've also got a dedicated electricians bag assembled with at least another 20 some odd pair. I keep all my electrical tools in the bag so when one of my neighbors or friends have a problem or something installed, I just grab that.

I am so pleased with the new Klein Pliers (above) that I will order another set to go in that bag. :)
 
...I need another pair of pliers like I need a hole in my head, (two drawers full - not including what I've got in my vehicles) as you can see!..
I was waiting for, "I've had some of these since I was a nipper."

You can't have too many good-quality tools. I regularly scour secondhand stores for old tools (whether I need them or no) and have picked up some fine old tools for cheap.

And you can't go wrong with Klein.
 
If my pliers drawer ever looked that clean and tidy, I wouldn't be able to find a thing. Oddly enough, I was looking for a pair of small nippers this morning, but mine were chipped and ended up in the trash. I know what I need now.
 
Those are nice and do a good job. I bought mine at Harbor Freight as they meet my requirements for buying their tools

That is no more than one moving part.

When they break, I'll replace them with better ones. Klein has a good reputation and has for years.
 
They have been around for a long time. They are used to dress the back of a circuit board so there are no high spots to cause a short.

I've seen flush cut pliers before but never in such a light, compact and thin configuration. Snap-on's version is $70+ bucks and is heavy, large and bulky. Glad I stumbled on to these! :)
 
They have been around for a long time. They are used to dress the back of a circuit board so there are no high spots to cause a short.

Many years ago, I used to do exactly that using fingernail clippers. Even though they are curved, the work pretty well for clipping small diameter wires. Maybe someone should make a wire clipper that looks like a fingernail clipper.
 
Many years ago, I used to do exactly that using fingernail clippers. Even though they are curved, the work pretty well for clipping small diameter wires. Maybe someone should make a wire clipper that looks like a fingernail clipper.

You know now that you've brought it up, maybe I will use them as fingernail clippers too! :D I'd bet they would be great!
 
I see you also like hemostats, chief38. I learned about them early in my electrical engineering career. Very useful for gun-related tasks too.

Exactly Sir! I use a pair with a solvent soaked patch, then a dry one to clean the inside of the grip frame of my auto loaders, inside the receiver of shotguns, etc. They work great! And yes they are also terrific as a mini vise grip and useful for soldering work as well. I do use them often. :)
 
Thanks for sharing. I will look into a set of them. I have a 5 gal bucket with an organizer insert full of Klein tools that I have had since the mid 70's.. I have only replaced the lineman's pliers, because I cut a live wire. Screwdrivers last forever, if you do not beat locknuts tight with them
 
Oh how I hate guys that have their tools organized. LOL
I always wish I had room to do that. Instead I use the pile it system. So I can spend lots of time digging through boxes of tools to find something I know I have. I am only 70 years old so maybe someday I will get organized.
 
In the Marine Electronics world we've been using small flush cutters for decades.
Would give a pair to boat owners who paid promptly. :D

In days of old, we would stone down tile nippers, for pulling frets on guitars, as they were not available already made.
StewMac has lotsa stuff now.
Had to mill sanding blocks, from aluminum, for crowning fret boards in days of old as well.
 
Oh how I hate guys that have their tools organized. LOL
I always wish I had room to do that. Instead I use the pile it system. So I can spend lots of time digging through boxes of tools to find something I know I have. I am only 70 years old so maybe someday I will get organized.

I've been super organized since I was a kid - can't help it! :o It's just in my DNA. After working on a project I will not go to bed with a mess on my workbench - and believe me.... it gets messy!!

I use my workshop and workbench pretty much every day - my wife has a knack for breaking things - LOL :D I can't start a project with a messy, unorganized bench, toolbox or shop.
 

Attachments

  • IMG_1539.jpg
    IMG_1539.jpg
    91.1 KB · Views: 46
  • IMG_1541.jpg
    IMG_1541.jpg
    94.7 KB · Views: 46
Back
Top