Recent content by azjohn

  1. A

    9mm 2nd Gen variations

    I have a TB numbered ambi-safety with a square trigger guard with dove tailed sights. Sorry but I am not an expert, so i can't give you an answer on the extractor. Eats anything, I feed it. Sorry forgot to state that it is a model 439
  2. A

    Where’s the best deal on primers?

    This is probably what you are thinking about GunBot Primers reloading
  3. A

    Need a new lead melting pot ... any suggestions?

    This is another good site with info on casting bullets. Cast bullet reference on lead alloy's, min / max pressure, lube, shrinkage,
  4. A

    Need Lee Bullet Seating die .38 Special

    Email Dennis at Titan Reloading. I just got a complete seating die for 9mm for about $18.00 plus shipping. Very good service.
  5. A

    MV of cast vs. Jacketed bullets

    Cases were mixed head stamps; coupled with 2 different bullets = different case capacities. Use the same brass and trim it so you get a more consistent crimp. Seat the bullets so that they take up the same space in the case.
  6. A

    Marry a Lyman 55 PM to a Lee SS Press?

    The threaded adapter on the 55 in your picture is for a 310 tool. You need this adapter.Lyman 7/8-14 Thread Adapter 310 Dies Model 55 Powder Measure. Then if you buy this stand it is set up permanently.RCBS Advanced Powder Measure Stand
  7. A

    357 Mag with 158gr LSWC

    Plenty of lead load data here. Cast Bullet Load Data
  8. A

    Lee Electric casting pot problem

    A lot of guys set up a PID controller. Plenty of reading here. Frozone
  9. A

    Supplemental reloading data

    Try this site. Cast Bullet Load Data
  10. A

    New Reloader: Instead of Unique?

    I'm surprised that no mentioned bullet fit as the #1 priority when it comes to leading. You can try all the powder combinations you want but if you don't a proper fitting bullet for your cylinder throats and barrel you will never get rid of the leading. Try this site. From Ingot to Target: A...
  11. A

    Lemi Shine, detergent or rinse??++ PICS ADDED++

    Lemi Shine has fruit acids in it; probably citric acid. You can read alot about citric acid at this link. Citric acid brass cleaner - Cast Boolits
  12. A

    158gn cast 9x19 loads

    I've loaded Lyman #358156's in my 439. It's a 158 gr SWC. I've used both bullseye and unique for these loads. It does take some experimenting with but can be done. Start with some dummy rounds to find your oal then work from there. Best to remove your barrel when you do this. This wasn't much of...
  13. A

    tumbling media

    tdan; why don't you ask if you can pay the difference and upgrade to what you want. Never hurts to ask.
  14. A

    Question for caster Re: RCBS 9mm mould

    Try this. RCBS Bullet Casting Scroll down the page and you will find it. I bought this mould a while ago and have not cast with it yet.
  15. A

    Reclaimed shot

    This is how they do it. http://mcneeleyenterprises.com/page.php?2
See more
Back
Top