Rebate
Ok, here is what I know on the S&W rebate as you all know Milano is the company that is taking care of your rebate. If you put your info on line like I did a screen pops up and says submission complete please allow 6 to 10 weeks for your rebate to be processed and when you check online...
Ejector rod fixed
Thank you sw282 after tightening it by hand I then put a piece of leather around it and used my small vice grip to tighten it some more to snug it up and now she seems fine.
Cylinder will not open
OK after some thought and some reading here on this site I hit the cylinder real hard with my hand and got the cylinder to open then I tightened the ejector rod so my question is should I send the 629 if it happens again or just keep an eye on the ejector rod to make sure...
Cylinder will not open
I just bought a new S&W 629-6 and after one trip to the range took the 629 to the house and gave her a very good cleaning then put her in the safe then about 5 days later I got out the 629 to show to a friend and the cylinder will not open, now I dry fired it then tried...
I just bought a 29-10 from Davidsons and when I got home I noticed the barrel was under clocked as the barrel is canted to the right so I called S&W and was told this is the way they are made now and to just adjust the sight and I said no way that I wanted a shipping label it took 3 days for the...
I bought a S&W 29-10 and after one week took it out to the range and the barrel is canted to the right put a box of 44 magnum 240 grain loads through her and it shoots great and when I got home I called S&W about my problem and was told that a canted barrel is normal.I do not think so and she is...
I have bought a 29-10 and a 686 Talo square butt 3 inch barrel. I love the 686 she is a very accurate revolver but the 29 is a different matter as the barrel is clocked (canted) to the right and will be going back to S&W.But I love the way the 29 shoots.