Recent content by jimc00

Not as safe as you would think Go on you tube and search deposit box and Steve Lehto. He’s a lawyer who does videos. He did a great one on safe deposit boxes and how vulnerable the contents are.

Oil for reaming You can use the oil that Home Depot sells for threading pipe. It is a cutting oil loaded with sulfur.

I have to check the two extractors with micrometers to see if there is a noticeable difference. I did check the stud that goes into the frame with a caliper and it was .003 smaller than the new one.

I sent a USPS MO and the parts arrived as described 1week later. Good seller.

I finally have feedback. I did everything that was suggested and still had jamming. I found a website that had an ejector for sale. I bought it and when it arrived, it was used. I installed it and went to the range. I also looked in my ammo stash and found some Remington SV and Winchester...

I’ll take A. The model 41 parts.

Don’t forget the 617 Mountain Gun. It’s the closest thing to a model 618 that was never produced.

Thanks, I ‘lol give them a try.

The one that is Gun-parts.com. I sent an email with a few questions and they didn’t answer if their parts were new or used.

I have a coffee can that is 2/3 full of #12 shot that I got to mix with epoxy to add weight to stocks. Don’t spill it! It flows like water.

Does anyone know if Bobs Gun Shop sells new OEM parts or are they used?

I put in a Volquartsen extractor, cleaned and lightly lubed the extractor spring and pin. Replaced the firing pin spring, replaced the recoil spring. Replaced 2 out of three mag springs, I left one as is as a control. I cleaned everything, lightly lubed the hammer spring. Cleaned 3 barrels. I...

There is an indicator to show the position of the hammer and I Verified that it is working correctly.

If you search U tube for Parmatech, there is a video that is about 9years old about MIM in the medical field. In that video, they show a trigger and what looks like a 2” J frame 38. Cal barrel that was made by the MIM process. That company is in CA and RI.

I’ll get the extractor. But what could cause the hammer to not reset only on the first two rounds. When I go to the range I usually bring the 5 1/2. bull barrel and a 5 1/2 sporter barrel just for fun. Before I go next time, I’ll clean both chambers and I’ll also bring a 7 3/8” as another test...