Recent content by khpe

Thanks a lot for your contribution on this thread. This helps me a great deal. Best Regards, khpe

To "smith crazy", I would be glad if you could be more specific about what accouter you connected together. --- Is the die you used on top of the Lee powder through die the mentioned so called "Lyman Multi-Expand Charge Die" ? Regards khpe

Hello again, I have done some more testing and thinking: 1. I mounted the re-size and decapping die in station 1. 2. I used the Lee powder trough expanding die (comes with the Lee Deluxe Pistol 4-Die Sets) in station 2. --- Now I have expanding/flaring. 3. I then mounted the Lyman powder...

Thanks very much. It seems to be just what I need! Best Regard, khpe

Hello, Do you know if it's possible to mount my Lyman #55 powder measure on top of a LEE Classic Turret Press? -- And at the same time get case expanding/flaring in this die-station! I know it comes a 7/8-14 die-thread adapter in the package. But this solution will not give me...

Here is mine (dash 6). Besides the model 10. The 4 inch m-66 is the revolver I like best. - MIM trigger/hammer/thumb-piece - Internal lock - One piece-barrel Enjoy shooting, Regads khpe

But there is those copper plated bullets from Berry's who is without a cannelure/groove. -- I have used a light taper crimp on those. There is also a crimp die from Redding who is making a crimp called profile crimp. That is a taper+roll crimp. PS! I always shoot light start loads. regards khpe

Tell Sackett, Thanks for you reply. -- Yes; my Barry's 125 gr plated HP bullets hits in the target center. Regards, khpe

Hello, Revolver: S&W M10 I have an average "Point Of Impact" (POI) about 3-4 inches at "12 o'clock". The POI is a relatively close group; ~3 inches on ca 25 yards. Ammunition: Berry's Plated 158 grain RN (no cannelure/groove), Speer LSWC 158 grain Power: Vihtavuori N340 4.9 grain...

Hei, How did I decide the "Cartridge Overall Length" on my Barry's plated bullets without canelure or crimping grove. I have .38 spl 158gr RN .38 spl 125gr HP Weapon is 4" S&W M10 Also. -- Have you any tips of type of crimp on the Barry's bullets. I have Lee FC roll crimp die, Lyman taper...

I am shamed to say that it was due to a bullet stucked in the barrel.

After a local gun smith remounted the barrel on my S&W M10 all the shots hits in a 3" tight group to the left on the target. (the average hit-point is ca 3 inches to the left of the bulls eye. Shooting distance is 27 yards) Since this is a fixed sight revolver I of course think that maybe the...

At least I got my self a Model-10. -- I have for long time looking forward to such an acquisition. Most noticeable features: - Dash number 11 - Bought new in an European weapon store January 2010. (13 years after production) - Serial number; CDW56xx - Inscriptions on the barrel: L.H.S.: SMITH &...

Thanks a lot for your comments, and your time. -- Regards khpe

Thanks a lot for your time and your answers. Regards, khpe