Recent content by NineBear

That would be a fun day.... I did not know X-Treme made a 135g 9mm projectile. I will have to give those a try. Is it hard to find load information for that weight bullet ?

Kuk, Mine is holding zero very well, about 250 rounds with it so far. I thought if i put a taller reflex type red dot on my M&P it would naturally raise the point of impact. I was surprised I had to keep cranking and cranking the dot toward UP until it was maxed. I'll see how it goes this...

If I'm shooting off a rest to sight in the Reflex and I get it zeroed with 5 shots in a 3-4" circle by maxing the red-dot to its highest point, how can that be trigger control. Its working just fine, I just had to max out the red-dot to its highest possible setting. I'm no crack shot off hand...

That is an awesome looking setup. Very well done...Wow. I also have the Burris Fastfire III on my M&P Pro 9mm. The stock sights were shooting quite a bit low, so I knew I had to do something. I put the mount kit on and then the Burris, without too much trouble. I then had to crank the Reflex...

Rastoff, I did shoot off a rest for all my zeroing. "Carry" is the golfer in me, sorry. I did mean bullet drop. It just seems to me if it shoots right on at 7 yards, then low at 18 yards it might be load related, or bullet weight? Sent from my Galaxy Nexus using Tapatalk 2

I recently acquired an M&P ProSeries 5" barrel in 9mm. It shoots lower than any handgun I've ever owned or tried. I figured I would resolve the problem by dialing in a Burris FastFire III RMR on a low rise bracket specifically for my gun and Red-Dot. I went to the range with the new setup...

B.A. I ordered a stock rear sight from S&W for their 9mm and installed on my M&P .22. It took a little work with a metal file, but no more than 5 mins. I did force it in a tad which caused some scraping on the slide (top) where the sight goes in. This was easily fixed with flat black paint...

Try putting a drop of gun oil on the first round of the magazine just before inserting into gun. This helped mine a lot. I also run my M&P 15-22 fairly well oiled with this same technique. It gets kind of messy but I clean after each session anyway. I am convinced you have to run the...

Jyezahn, Very nice looking 15-22, I really like all the Zombie stuff. If you can't have some fun with it you're wound too tight....

I went to Indy 1500 as well. Picked up some small items and a Crimson Trace mini laser that will work on my various pistols and AR 15-22. I just have to know one thing....what is with all of the Sig's at threse Indiana shows? They must outnumber all other new guns for sale 10 to 1... Sent from...

Update on my AR-15 shell blow up, I had the local dealer send this back to S&W. It took 11 days from start to finish, I was quite surprised to get it back so quickly. It is very interesting that the only thing they fixed/replaced was the firing pin (new one). The gun would not cycle a round...

I gave up playing golf.... Can't have 2 expensive hobbies and two kids going thru college. I'm going to have to change my screen name.

I have had good luck with several types of ammo, CCI, Federal and Win white box. I use a tip from another poster on this site..... 1 drop of gun oil on the first round in the magazine every 3 mags or so. Seems like I have to keep the ramp and feed internals well lubricated during range firing...

Update to my mini-explosion. I cleaned my AR15-22 tonight, first time out of the case since the incident and it no longer works. It won't hold a magazine in place, no matter what I try. And it won't cycle a round into the chamber. I messed up several rounds of CCI Mini-mags trying to get it...

Yes, it has a very front strike on the very edge. I'll have to check out my good strikes. Sent from my Galaxy Nexus using Tapatalk 2