Recent content by PhysicsGuy

My CZ was a little sensitive to an OAL of 1.12 that I was trying to run, so I brought my loads down to about 1.08, with a little less charge, in order to get perfect function.

PM sent your way

Bump to top

You can also file the strain screw to the desired tension when seated. But I usually suggest to have the screw fully seated, if it comes loose from where it is set, then you will have a temporarily disabled gun (which at the range isnt a big problem). Easiest way I found to adjust your DA pull...

It appears that there are .265" and .375" spur hammers for the 686. Hope that helps

Alright, shoot me a PM with what you have left (I'm more interested in the 20s)

Are the Mec gar mags you have left the 17rd or 20rd? How many left, and price for all of them?

bump up top

Yes I know that stainless can corrode, and some of the parts on these aren't stainless. I was just didn't feel like stripping off the small parts, as they were dried with a hair dryer :D

I decided to finally get around to doing trigger work on a few of my S&W revolvers. I have been considering sending the ones I use the most off to the performance center, but figured I'd save some money work by doing some spring replacement, cleaning, and lubing. Although S&W does do other...

Forgot to include "no locks" ;)

btt. Stainless 4" 686/625/629/624/296/696 trade offers?

So the .40 S&W can generate over 1000ft/lbs of energy???? :D (Energy from max load data of 125gr XTP with 22grs of H110 @41,400CUP, generating 1966ft/s, which works out to about 1072ft*lbs)

Finally decided to give in and buy an X-frame S&W, I have been wanting one for years, but hate the idea of internal locks. Anyways, I picked up a 460 XVR today, and it is just massive, it makes my 8 3/8" Raging bull look small. I opened it up and took a look inside, and it is obvious that S&W...

Not looking for blued guns at the moment, and I only really want to trade for another 624 in 4" or 3", but thanks for the offer!