Recent content by Retired in 2001

  1. Retired in 2001

    Squib load/Bullet in the bore

    Remove the cylinder before to try to drive that thing out I wrecked a 642 so I know now...good luck
  2. Retired in 2001

    M&P 15 Recall-Anyone know about this?

    I ordered mine March 18 still waiting. I called they said 2 more weeks they should be in. I dont know about qc at S&W there are alot of recalls there
  3. Retired in 2001

    Help with 9mm 95 grain using 231

    My bayou bullets are smooth I should have stated that better before hopefully it clears it up to everyone. Since I got my Dillion 550 I enjoy reloading so much more even more that shooting if that makes sense to any other reloaders here.....
  4. Retired in 2001

    Help with 9mm 95 grain using 231

    My Lyman Cast Handbook is calling 1.169
  5. Retired in 2001

    Help with 9mm 95 grain using 231

    Yes sir 95 grain round nose 👌🏼👍🏼
  6. Retired in 2001

    Help with 9mm 95 grain using 231

    Thinking about it 95 grain bullet for me it was very manageable or maybe try 4.0 for her good luck let me know how it works out again I was using a compact piece thanks
  7. Retired in 2001

    Help with 9mm 95 grain using 231

    Range report finally got some loading done just 11 rounds used 4.4 of 231 oal 1.115 at 15 feet using my Ruger SR9c result were pretty good a inch and a half.
  8. Retired in 2001

    Help with 9mm 95 grain using 231

    OK I got Dennis of Bayou Bullets he said to start 3.8 of 231 and Max of 5.1....real nice guy I will try to run some off and tell you how I did thats all for now until then.
  9. Retired in 2001

    Help with 9mm 95 grain using 231

    I only information is for jacketed Bullets I am trying to use 95 powder coated lead
  10. Retired in 2001

    Help with 9mm 95 grain using 231

    Thanks yes they are I tried to call them but the line is busy
  11. Retired in 2001

    Help with 9mm 95 grain using 231

    Trying to load some. Bayou bullets 95 grain using Win 231 can’t find anything in my Lee manual or Speer or Hogdon thanking you all a head of time
  12. Retired in 2001

    9mm plated round nose getting flat nose

    Ok here it’s is received a lee seating die today loaded approx 100 9mm with ever so light rounds nose flatting closing the trouble ticket out again the shooting and reloading community is the greatest of course IMOHO reditiredin out for now
  13. Retired in 2001

    9mm plated round nose getting flat nose

    Many thanks for responses in the green bag is what I received when I bought my dies.I agree that they should ship me out one on the shelf sadly I was told to mail in 3 115 grain Bullets and they will make one with the same Ojave quote and 24 bucks I& it would’ve been a lee die it would be 8...
  14. Retired in 2001

    9mm plated round nose getting flat nose

    In My rcbs plastic bag 9mm TMJ/38/9mm RN “””””””””””””””””38/9mm RN 38 WC The difference between 9mm and 38 special is one thousandth of a inch Hopefully this cleared it up
  15. Retired in 2001

    9mm plated round nose getting flat nose

    I am using 4.4 of win 231
See more
Back
Top