Recent content by Steve Koski

It depends on what you find as acceptable. Me? I can deal with 5-8 lbs if it's crisp. My (blue springs) stock trigger felt like it had sand in it. Far from crisp. I put the yellow JP springs in it and did some light polishing, and it's a little lighter, and a little smoother, but still...

Does anyone have any recommendations on a nice two-stage AR trigger?

Very nice!!!

I just put in the JP Enterprises 3.5 lb spring kit in, and did some light polishing with a felt wheel/dremel tool on the sear nose. I stoned the hammer notch very lightly. I then lubed it up with anti-sieze compound as recommended in the JP spring kit and reassembled. I'm decidedly...

Whoops. Nevermind.

I pushed a few patches through it.

My Ruger MKIII 22/45 has probably been dry fired 3000 times. My Ruger 10-22 was probably dry fired at 1000 times. no problems and no damage in either case. True, some older rimfire designs can be damaged by dry firing, but they lacked a firing pin block. My Kel Tec P3AT manual also says not...

I was just cleaning the bore on my brand new 15-22 tonight with a Hoppes aluminum rod setup, and found that when I pulled the rod back , I got a PILE of aluminum shavings. Probably being peeled off by the ejector. Good idea on the boresnake for the 15-22. Seems the ejector interferes with...

Bosaki, That sounds like a gun a friend of mine has. Do you know him? Seriously, I have a S&W book that has some diagrams of parts with names & such. Let me know if you want me to scan some of the pages in and email them to you. Steve Koski