Recent content by tsisco

I just got my 15-22 and did the "15 minute trigger pull" routine on it. When I got to the range I found that reducing the factory hammer spring tension by half resulted in the rifle failing to strike the primer at all. I had read others' posts about successfully doing this work on their...

Some of the best shots I know are granddaughters. :)

15 minute trigger job I did the "15 minute trigger job" on my MP 15 Sport and I was well pleased with the result! I'll do it on my 15-22 as soon as I take possession of it because it's still in jail.The trigger weight was reduced at least 2-3 lbs and my AR is now a pleasure to shoot.

Good point, Lee, and yes, I did go thru the action and lube it before going to the range. Mine seemed to be dry, too. My concern is that a factory supplied mag would usually be presumed to be a quality mag and not the source of the problem. I'll try a different mag and see what happens...

Dragon 88... The mag is just an anonymous 10 rd mag with no significant identifying marks, brand, or anything, not even an S & W logo. The gun isn't short stroking because I had it ftf also from a fully held open bolt, not just after firing a round. I don't recall any problems with the bolt...

Today was my first experience with my M-15 Sport. After about 100 rounds (during which I had a few ftf probs), I really started having so many ftf problems to the extent I put the gun away for the day. My rifle was fresh out of the box using the factory 10 rd magazine and Federal ammo. I love...