Lachmiller dies

joeintexas · Apr 4, 2018

Meet a guy at the gun range last week that had a set of dies he wanted to sell. He wanted $20 for the 3 die set, he had no idea what they were. I looked at the box, faded yellow with red lettering cardboard box and had a good idea they were Lachmillers, .357 magnum. Haven't seen anything from them in probably 30 years or so. They looked unused. They did come home with me and loaded up a bunch of .357's. Quality dies. My guess most folks never heard of them.

grayrat · Apr 4, 2018

I still load on my father's Lachmiller loading press and some of the die I use are also Lachmiller dies. I think he bought this back in the 50's. It also came with 12 gauge dies that we used to load the old paper shell with. This was also with paper wads (preplastic wads). I think I've dated myself.

PALADIN85020 · Apr 4, 2018

"Lachmiller dies."

So who is this Lachmiller, and when did he die???

John

Kurusu · Apr 4, 2018

PALADIN85020 said:
"Lachmiller dies."

So who is this Lachmiller, and when did he die???

John

My thoughts exactly.

And that's why I peeked in this thread.

BC38 · Apr 4, 2018

Kurusu said:
My thoughts exactly.

And that's why I peeked in this thread.

Me too - exactly.
I was wondering is he a member of the forum, or a gun writer, or a U-Tube poster, or what...?

Hasbeen1945 · Apr 4, 2018

There is definitely some youngsters talking about reloading.

rockquarry · Apr 4, 2018

I never owned a set of Lachmiller dies, but they had a good reputation as did other Lachmiller products.

This may not have happened, but anyone know if RCBS took over the Lachmiller line in the early or mid-'70s? RCBS bullet moulds (even those produced today) look like the old Lachmiller moulds.

rwsmith · Apr 4, 2018

Wow, you bet I don't remember....

Wasn't it cool that people were reloading enough to keep so many manufacturers busy.

LoboGunLeather · Apr 4, 2018

Looking at the Lachmiller powder measure mounted on my loading bench as I write this. Purchased it in 1974. Tens of thousands of rounds loaded with it and still in perfect working condition.

Lachmiller Engineering Company, 11273 Goss St., Sunvalley, Calif. 91352, according to the product label.

damienph · Apr 4, 2018

I have a set of .303 British dies. Very good quality. The address on mine say Glendale California. They were sold to me as NOS about 20-25 years ago. I do think that RCBS bought out Lachmiller and continued their bullet molds but discontinued their dies. I think maybe late ‘60s or early ‘70s.

I started handloading after I got out of the Army in ‘76 and I think they were out of business then.

Collo Rosso · Apr 5, 2018

Hasbeen1945 said:
There is definitely some youngsters talking about reloading.

That's a good thing.

shootergdv · Oct 25, 2018

Lachmiller

Believe he sold out to Lyman - the 55 powder drop is very much like one of his later measures. He died in about 2012-13 at age 94 . Made good stuff. Probably made some of George Herter's "Perfect" tools too.

AJ · Oct 25, 2018

shootergdv said:
Believe he sold out to Lyman - the 55 powder drop is very much like one of his later measures. He died in about 2012-13 at age 94 . Made good stuff. Probably made some of George Herter's "Perfect" tools too.

No Lachmiller stuff, but do have a set of Herter's dies and a Herter's Catalog.

DWalt · Oct 25, 2018

I remember Lachmiller tools and dies, but never owned any. Some years back, there were more die makers than today - C-H, Perfection, Pacific, Hollywood, Lachmiller, Wells, Saeco, Weatherby (for Weatherby calibers), and Herter's. I guess Lyman still makes them but I haven't seen any for awhile. I still have three sets of Herter's dies but the majority of mine are RCBS. Can't say I have a favorite brand, but I usually buy Lee dies today.

cgbach · Oct 25, 2018

I learned to reload on a Lachmiller press with Lachmiller dies. I still have a couple of sets of the dies; they worked well enough. Their die construction was a bit interesting. The bodies were aluminum with steel inserts. I can only guess that this construction saved them a few cents on material costs. They made a really nice priming tool as well.
C.G.B.

BC38 · Oct 26, 2018

Hasbeen1945 said:
There is definitely some youngsters talking about reloading.

LOL, some of us aren't exactly youngsters, we just haven't been reloading for decades.

FWIW, I'm 56 in a couple of weeks, but I only started reloading a few years ago.

Ivan the Butcher · Oct 26, 2018

DWalt said:
I remember Lachmiller tools and dies, but never owned any. Some years back, there were more die makers than today - C-H, Perfection, Pacific, Hollywood, Lachmiller, Wells, Saeco, Weatherby (for Weatherby calibers), and Herter's. I guess Lyman still makes them but I haven't seen any for awhile. I still have three sets of Herter's dies but the majority of mine are RCBS. Can't say I have a favorite brand, but I usually buy Lee dies today.

Pacific became Hornady in the 1970's. A couple you didn't list were Starr (non 7/7-14), Hollywood (any size you wanted up to 1 1/4-10) Lee is still around, Wilson (arbor press dies and still around) Plus several tool companies made dies that were only caliber marked, but they only fit their presses or have non-7/14 threads, so people just throw them away. (always a bad idea to waste what you don't understand!)

If you have odd dies, C-H 4-D is now in Mount Vernon, Ohio. They have in stock adapters for any die to fit a press with a larger diameter hole. The RCBS Rock Chucker series has a 1 1/4-10 hole and come reduced to 7/8-14, but there are even bigger dies out there. C-H even makes dies for 20mm cannon and presses to fit (if you can afford the gun, you won't worry what the reloading gear costs!)[and I wish I could afford either!]

Ivan

Lachmiller dies

joeintexas

US Veteran

grayrat

Member

PALADIN85020

US Veteran

Kurusu

Absent Comrade

BC38

Member

Hasbeen1945

Absent Comrade

rockquarry

Member

rwsmith

Member

LoboGunLeather

US Veteran

damienph

Member

Attachments

Collo Rosso

Member

shootergdv

AJ

US Veteran

DWalt

Member

cgbach

Member

BC38

Member

Ivan the Butcher

Member

Similar threads

Latest posts