|
|
|
04-05-2024, 08:33 AM
|
|
SWCA Member
|
|
|
Join Date: Jun 2000
Location: Massachusetts USA
Posts: 6,816
Likes: 3,716
Liked 8,980 Times in 3,563 Posts
|
|
Just a side note. There is strong evidence that these cases were not Gutta Percha and actually made from a substance called "mud". Somewhere I have an article by an authority on this subject and will try to dig it up.
PS: This is from a 2021 thread and posted by first model:
"There were two different thermoplastic cases that were made by Littlefield, Parsons & Co. for Smith & Wesson. Below is a photo of the other box, which obviously has different decorative elements from the molds that Don has. The boxes were otherwise identical.
The thermoplastic material used to make these boxes would have been poured into the molds in a liquid state.
As an aside: collectors often call these "gutta percha" cases, but this isn't really correct. Gutta percha is a natural latex rubber substance which looks very similar to the thermoplastic uses in these cases—but it's not the same. The material used for these cases was a shellac-based substance that was mixed with a very fine sawdust.
Mike"
The name Vern Eklund is also mentioned in the thread and IIRC he was the one that did the study o these cases and the actual product used......
Perhaps a forum search using his name will bring up his information on the subject.
__________________
James Redfield
LM #497
Last edited by JSR III; 04-05-2024 at 08:40 AM.
|
04-05-2024, 12:04 PM
|
SWCA Member
|
|
|
Join Date: Nov 2006
Location: Arizona
Posts: 2,996
Likes: 4
Liked 2,534 Times in 1,315 Posts
|
|
mrcvs wrote: "And, I have seen reference to a rare brown case with regards to the Flags variation. Does it also exist in the Pistol variation?" See post #9 for an example of the brown pistol case.
__________________
Mike Maher #283
|
04-05-2024, 12:54 PM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,489
Likes: 3,296
Liked 7,353 Times in 1,939 Posts
|
|
Quote:
Originally Posted by mmaher94087
mrcvs wrote: "And, I have seen reference to a rare brown case with regards to the Flags variation. Does it also exist in the Pistol variation?" See post #9 for an example of the brown pistol case.
|
Post #9 shows a brown Pistol variation . Maybe the brown variation was only found on the Pistol cases, or was it found on the Flags variation as well? Intentional, or accidental?
|
04-05-2024, 01:02 PM
|
|
S&W Historian
|
|
|
Join Date: Jun 2008
Location: Massachusetts
Posts: 3,435
Likes: 3,408
Liked 11,370 Times in 2,909 Posts
|
|
I have a brown case that is a cribbage board.
__________________
Don Mundell
|
The Following User Likes This Post:
|
|
04-05-2024, 03:07 PM
|
|
US Veteran
|
|
|
Join Date: Feb 2013
Location: Dallas, Texas
Posts: 8,335
Likes: 2,559
Liked 13,372 Times in 4,621 Posts
|
|
I have nothing to add here except I've never run into the OP/twaits before and his avatar is a mug shot of Lucky Luciano and I'm ROTFLMAO!!!!
Well done!!!
__________________
Come and take it!!
|
04-05-2024, 06:27 PM
|
SWCA Member
|
|
|
Join Date: Dec 2022
Posts: 305
Likes: 196
Liked 484 Times in 161 Posts
|
|
Hi There,
I wish I could remember where I read an article on the company
that made those cases. They made cases commercially and sold
cases to other firearm manufacturers (Bacons and Wheelock
pocket pistols have been found cased with the flag box). Their
cases were used for holding games and playing cards too.
The article went on to show the original molds which were still in
existence at that time. I'm not sure if they used injection molding
but the boxes were heated with high pressure steam. I don't
remember whether they used ejector pins to force the box from
the mold or not.
Cheers!
Webb
Last edited by wlw-19958; 04-05-2024 at 06:29 PM.
|
04-05-2024, 06:53 PM
|
Member
|
|
|
Join Date: Sep 2017
Posts: 2,957
Likes: 1,848
Liked 4,696 Times in 1,723 Posts
|
|
Brown/Black
I suspect the Browning of the case was caused by sun exposure over a long period of time. This exact same condition is seen on many HR antique firearms from many manufacturers at that time.
I’ve even seen where one grip( usually the right side) is brown and the left side is black. Supports that the owner was right handed and the right side of the pistol was exposed to the sun when carried.
These cases could have sat on top of a desk, night stand, mantel, etc and were exposed to morning or evening sun gradually turning Brown over time. The browning of grips also goes all the way through the material. I have a few.
Murph
Last edited by BMur; 04-05-2024 at 06:59 PM.
|
04-05-2024, 07:21 PM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,489
Likes: 3,296
Liked 7,353 Times in 1,939 Posts
|
|
Quote:
Originally Posted by BMur
I suspect the Browning of the case was caused by sun exposure over a long period of time. This exact same condition is seen on many HR antique firearms from many manufacturers at that time.
I’ve even seen where one grip( usually the right side) is brown and the left side is black. Supports that the owner was right handed and the right side of the pistol was exposed to the sun when carried.
These cases could have sat on top of a desk, night stand, mantel, etc and were exposed to morning or evening sun gradually turning Brown over time. The browning of grips also goes all the way through the material. I have a few.
Murph
|
That’s exactly why I asked this. Is the browning truly an original brown colour, or is it the same brown experienced by some hard rubber and/or gutta percha stocks? My guess it’s the latter, developing over time, but some literature out there seems to suggest it’s uncommon but intentional.
|
The Following User Likes This Post:
|
|
04-05-2024, 07:26 PM
|
Member
|
|
|
Join Date: Sep 2017
Posts: 2,957
Likes: 1,848
Liked 4,696 Times in 1,723 Posts
|
|
Browning
There is so much evidence that supports browning is caused by sun exposure that I personally think you would need to find a period advertisement that offers BROWN as an option color.
Brown grips look really nice but they were not originally brown. They were black. You could say they were originally brown and you’d likely get a following of believers.
Murph
Last edited by BMur; 04-05-2024 at 07:30 PM.
|
04-05-2024, 08:43 PM
|
SWCA Member
|
|
|
Join Date: Nov 2006
Location: Arizona
Posts: 2,996
Likes: 4
Liked 2,534 Times in 1,315 Posts
|
|
Referring to post #9 photos, the cases were made in brown. Sunlight would not affect the insides or bottom of these cases as shown.
__________________
Mike Maher #283
|
The Following User Likes This Post:
|
|
04-05-2024, 09:48 PM
|
Member
|
|
|
Join Date: Sep 2017
Posts: 2,957
Likes: 1,848
Liked 4,696 Times in 1,723 Posts
|
|
Suntan
I don’t think it’s like getting a sun tan. Sort of like baking a cake. I’m not a chef but Somehow the inside of the cake gets cooked too.
Murph
Last edited by BMur; 04-05-2024 at 09:49 PM.
|
04-06-2024, 03:46 AM
|
|
Member
|
|
|
Join Date: Nov 2012
Location: Victoria Australia
Posts: 1,132
Likes: 45
Liked 835 Times in 360 Posts
|
|
Quote:
Originally Posted by Club Gun Fan
I have a brown case that is a cribbage board.
|
I have a brown No 1 case and have held others.
Mine is well cooked right through, brown on the outside and inside..
Last edited by Aussie Collector; 04-06-2024 at 03:47 AM.
|
The Following User Likes This Post:
|
|
04-06-2024, 12:19 PM
|
Member
|
|
|
Join Date: Sep 2017
Posts: 2,957
Likes: 1,848
Liked 4,696 Times in 1,723 Posts
|
|
Experiment
I’m going to start a new thread on Brown/Black grips.
Murph
|
04-12-2024, 10:17 AM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,523
Likes: 672
Liked 1,635 Times in 707 Posts
|
|
Quote:
Originally Posted by mrcvs
or is it the same brown experienced by some hard rubber and/or gutta percha stocks?
|
Smith and Wesson never offered Gutta Percha stocks on any weapon. S&W used hard rubber which comes from a different plant.
__________________
S&WHF #946
S&WCA #3824
|
04-12-2024, 06:06 PM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,489
Likes: 3,296
Liked 7,353 Times in 1,939 Posts
|
|
Quote:
Originally Posted by Model19man
Smith and Wesson never offered Gutta Percha stocks on any weapon. S&W used hard rubber which comes from a different plant.
|
Yes, correct. Smith & Wesson used hard ribber. I was referring to stocks, in general, by ANY manufacturer that may have browned over time, be they gutta percha, hard rubber, or other.
|
04-12-2024, 06:25 PM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,523
Likes: 672
Liked 1,635 Times in 707 Posts
|
|
I am not aware of any stocks for any gun manufacturer being actually made from gutta percha. It's a poor material for about any purpose because it shrinks and cracks so easily. You will find "collectors" calling hard rubber gutta percha because they just don't know the truth.
__________________
S&WHF #946
S&WCA #3824
|
04-12-2024, 08:34 PM
|
SWCA Member
|
|
|
Join Date: Nov 2006
Location: Arizona
Posts: 2,996
Likes: 4
Liked 2,534 Times in 1,315 Posts
|
|
I'm not sure if I can add anything but I want to say that these Shellac based thermoplastic cases could be dyed to a preferred color such as black or brown as found in these cases. The case material was molded after heating (~325 F) and molded under pressure.
The stocks (grips) were made of hard rubber and poured into molds and allowed to setup or harden.
__________________
Mike Maher #283
|
04-13-2024, 07:41 AM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,489
Likes: 3,296
Liked 7,353 Times in 1,939 Posts
|
|
Quote:
Originally Posted by Model19man
I am not aware of any stocks for any gun manufacturer being actually made from gutta percha. It's a poor material for about any purpose because it shrinks and cracks so easily. You will find "collectors" calling hard rubber gutta percha because they just don't know the truth.
|
Do you have proof as to this statement? It very well may be true, but certainly needs scholarly support.
But it seems hard to believe that not one manufacturer EVER manufactured a revolver with gutta percha stocks, even for a short period of time, perhaps determining they were sub standard and switching to hard rubber or other superior material.
|
04-13-2024, 11:03 AM
|
SWCA Member
|
|
|
Join Date: Jun 2011
Location: Tulsa OK
Posts: 1,523
Likes: 672
Liked 1,635 Times in 707 Posts
|
|
Quote:
Originally Posted by mrcvs
Do you have proof as to this statement? It very well may be true, but certainly needs scholarly support.
But it seems hard to believe that not one manufacturer EVER manufactured a revolver with gutta percha stocks, even for a short period of time, perhaps determining they were sub standard and switching to hard rubber or other superior material.
|
It's pretty hard to prove a negative. Perhaps if you care to find an example that actually is? Major companies like Colt and S&W never did, too much trouble. Maybe some obscure maker did, but that would be uncommon.
__________________
S&WHF #946
S&WCA #3824
|
04-13-2024, 11:29 AM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,489
Likes: 3,296
Liked 7,353 Times in 1,939 Posts
|
|
Quote:
Originally Posted by Model19man
It's pretty hard to prove a negative. Perhaps if you care to find an example that actually is? Major companies like Colt and S&W never did, too much trouble. Maybe some obscure maker did, but that would be uncommon.
|
I’m nearly 100% certain that an obscure maker did just that. But there’s no way to know for sure that a researcher didn’t misdescribe a set of stocks as being gutta percha when they weren’t.
|
04-13-2024, 11:34 AM
|
SWCA Member
|
|
|
Join Date: Mar 2011
Posts: 3,489
Likes: 3,296
Liked 7,353 Times in 1,939 Posts
|
|
This article discusses gutta percha grips by various makers. And so it’s superfluous to say none were ever made. Granted, they are limited in number, but do exist.
https://americansocietyofarmscollect...ynthetics-.pdf
|
04-13-2024, 12:54 PM
|
Member
|
|
|
Join Date: Jan 2010
Posts: 979
Likes: 2,180
Liked 883 Times in 361 Posts
|
|
The Remington cane guns are always described as Gutta Percha ??
|
|
|
Posting Rules
|
|
|
|
|