|
|
07-10-2011, 10:54 AM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
627PC or Older 27?
I put this in the newer thread because I'm kind of leaning toward the PC, but I could be swayed. I'm in the market for a big N frame 357 and I'm having a hard time deciding on the two. I've shot the 27 and really like it, but I've never shot the 627PC and I like the look of the PC. I don't have a dedicated purpose for the gun. Just something that I can shoot some hot 357 loads through without worrying about the gun. This would be a 357-only gun. No 38s would be shot with it. Any thoughts or recommendations on the two would be appreciated. Thanks!
Sent by Brown's Custom Grips using Tapatalk!
|
07-10-2011, 11:15 AM
|
Member
|
|
|
Join Date: Feb 2007
Posts: 2,102
Likes: 0
Liked 395 Times in 227 Posts
|
|
I'd go with the 627. As I see it, why have only six in the gun when you can have eight? The 627 I bought is a -5 with the regular contour 4" barrel. If you like the looks of a certain PC barrel, then go for it. I'm not exactly a fan of the newer revolvers but I removed the lock and had a narrow grooved trigger installed, and I'm quite happy with what I have now. If you are uncertain about its intended use, the 4" barrel will be a good compromise. My 627 handles the hottest .357 Magnum loads without any problems and frankly I'm surprised at how comfortable it is to shoot with the heavy loads, though that is probably due to the round and somewhat heavy barrel.
Dave Sinko
|
07-10-2011, 12:12 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
So you have the one with the full lug along the bottom? The ones I'm looking have the angled lug.
I just can't seem to get my head around it. One minute I think I'm ready to buy the 627PC and the next minute I'm doubting it thinking about the classic and timeless look of a blued 27.
|
07-10-2011, 01:31 PM
|
Member
|
|
|
Join Date: Feb 2007
Posts: 2,102
Likes: 0
Liked 395 Times in 227 Posts
|
|
My 627 does not have a full underlug. I don't think they were ever made with a full underlug. It's a regular round barrel without any kind of lug, only a bit thicker. I think of it as the budget model; it was not cut for moonclips and it doesn't have any fancy barrel profile. I don't like flat barrels, angled lugs, half lugs or lugs with holes in them. Just be advised that the barrels of the older six shooters and the newer eight shooters are NOT interchangeable, should you have ideas of buying one and installing another barrel.
Dave Sinko
|
07-10-2011, 01:47 PM
|
|
Member
|
|
|
Join Date: Jun 2004
Location: Independence, OH, USA
Posts: 6,707
Likes: 29,177
Liked 7,297 Times in 2,627 Posts
|
|
I have both. The 8 shot 627 PC with the contoured bbl is one of my favorites. The 627 is very accurate. It can be used with moon clips or with out. In our clubs modified IDPA shoots, the 8 shots keep up with the 8 shot .45 autos. I'm a blue and wood type person and also like the pre-27's. Good luck, Larry
|
07-10-2011, 02:02 PM
|
|
Member
|
|
|
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,421
Likes: 3,131
Liked 22,773 Times in 5,882 Posts
|
|
|
07-10-2011, 02:08 PM
|
Member
|
|
|
Join Date: Dec 2009
Posts: 1,124
Likes: 1
Liked 450 Times in 116 Posts
|
|
I would get a 627. I love blued guns and have a could of 27's but the stainless guns are just easier to care for. Here are my two 627's a 627-0 and 627pc "blood work"
|
07-10-2011, 02:26 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
Quote:
Originally Posted by colt_saa
|
We have a winner! The 6th photo you posted, tell me about THAT one! It looks completely different from the others I've seen and that one really calls to me. It has just the right amount of classic look mixed with newer features.
Sent by Brown's Custom Grips using Tapatalk!
|
07-10-2011, 02:59 PM
|
|
Member
|
|
|
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,421
Likes: 3,131
Liked 22,773 Times in 5,882 Posts
|
|
Quote:
Originally Posted by Cirrus
We have a winner! The 6th photo you posted, tell me about THAT one! It looks completely different from the others I've seen and that one really calls to me. It has just the right amount of classic look mixed with newer features.
Sent by Brown's Custom Grips using Tapatalk!
|
The 6" 627 Hunter , product code 170102 pictured, is a GREAT revolver.
It was a distributor exclusive offering in 1998. Product code 170095 is an almost identical revolver that was an exclusive for a different distributor. So both would have unique exclusive offerings 170095 has a fluted cylinder.
Mine is not wearing the original factory supplied grips. I prefer the older factory Combat stocks and often put then on firearms that I shoot on a regualr basis.
As can be expected, these revolvers are muzzle heavy. The cool part is that there is a hidden weight system in the under lug. The revolvers are shipped with 5 weights and 5 spacers allowing the user to vary weight and balance of the firearm according to individual taste.
If I recall correctly, 200 of 170102 were manufactured. I do not know how many of 170095 were made, but I would bet it is 200-300. Additionally two prototype 7 1/2" versions of the revolver were created. Smithnut has one of them and perhaps we will get an image if he notices this thread.
These will be hard to find. I have never met an owner of one that wanted to part with it. MSRP on 170102 was $1025 in 1998.
Last edited by colt_saa; 07-10-2011 at 03:01 PM.
|
07-10-2011, 03:03 PM
|
|
US Veteran
|
|
|
Join Date: Mar 2010
Location: R.T. P, area NC
Posts: 9,694
Likes: 29,847
Liked 23,151 Times in 5,819 Posts
|
|
Any decent quality M 27 is getting harder to find and more expensive to boot. As good as the new guns are, they will never be in the same class as the classic P&R N frames.
So get the M-27..
__________________
Always Stay Strong!
|
The Following User Likes This Post:
|
|
07-10-2011, 03:40 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
Quote:
Originally Posted by colt_saa
The 6" 627 Hunter , product code 170102 pictured, is a GREAT revolver.
It was a distributor exclusive offering in 1998. Product code 170095 is an almost identical revolver that was an exclusive for a different distributor. So both would have unique exclusive offerings 170095 has a fluted cylinder.
Mine is not wearing the original factory supplied grips. I prefer the older factory Combat stocks and often put then on firearms that I shoot on a regualr basis.
As can be expected, these revolvers are muzzle heavy. The cool part is that there is a hidden weight system in the under lug. The revolvers are shipped with 5 weights and 5 spacers allowing the user to vary weight and balance of the firearm according to individual taste.
If I recall correctly, 200 of 170102 were manufactured. I do not know how many of 170095 were made, but I would bet it is 200-300. Additionally two prototype 7 1/2" versions of the revolver were created. Smithnut has one of them and perhaps we will get an image if he notices this thread.
These will be hard to find. I have never met an owner of one that wanted to part with it. MSRP on 170102 was $1025 in 1998.
|
Great information. Bummer to hear about their scarcity. It seems like I have taste for things difficult to find. I like the integrate scope base. I'd had thoughts in the past about a reflex/holo sight on a hunting revolver that could be easily taken off for general fun shooting. That gun would have been perfect. I will keep my eye out for one, but better be looking for an alternate.
Sent by Brown's Custom Grips using Tapatalk!
|
07-10-2011, 11:14 PM
|
Member
|
|
|
Join Date: Feb 2009
Posts: 25
Likes: 1
Liked 0 Times in 0 Posts
|
|
I have a 627 PC. Love it. It is my one gun keeper.
|
07-11-2011, 03:11 PM
|
Member
|
|
|
Join Date: Oct 2003
Location: Maryland
Posts: 387
Likes: 0
Liked 102 Times in 53 Posts
|
|
My 27-2 is my first handgun, but I prefer stainless, so my 627PC gets shot a lot more.
__________________
Tom
|
07-11-2011, 10:24 PM
|
|
SWCA Member
|
|
|
Join Date: Apr 2004
Location: Warrensburg, MO USA
Posts: 5,291
Likes: 2,912
Liked 3,402 Times in 1,725 Posts
|
|
Get the 27 first as they are not making any more. When you can afford it, you can then go for the 627. You know you will want one anyway!!
__________________
Richard Gillespie
FBINA 102
|
07-11-2011, 10:44 PM
|
Member
|
|
|
Join Date: Apr 2008
Location: Tucson, Arizona
Posts: 1,450
Likes: 0
Liked 40 Times in 25 Posts
|
|
I own a 27. It's no safe queen, I shoot it often and it's among my favorites. That said, I would LOVE to have a 627. I've fired one (at the S & W Range in Springfield) and it's a superb piece, beautifully balanced, accurate, and the 8-shot capacity is icing on the cake. Indeed, the 8-shot 627 has an advantage over the older 27 in that the da trigger stroke on the modern gun is noticeably shorter than on the old 27. Throw in the fact that the 627 -- at least the PC 627 -- is cut for moonclips and I'd say it's the perfect large frame revolver.
|
07-12-2011, 03:19 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
How about this one: 627PC or 627 V-Comp?
Sent by Brown's Custom Grips using Tapatalk!
|
07-12-2011, 06:33 PM
|
Member
|
|
|
Join Date: Jun 2006
Location: New Orleans, LA
Posts: 1,486
Likes: 3,155
Liked 3,122 Times in 776 Posts
|
|
Quote:
Originally Posted by stevieboy
I own a 27. It's no safe queen, I shoot it often and it's among my favorites. That said, I would LOVE to have a 627. I've fired one (at the S & W Range in Springfield) and it's a superb piece, beautifully balanced, accurate, and the 8-shot capacity is icing on the cake. Indeed, the 8-shot 627 has an advantage over the older 27 in that the da trigger stroke on the modern gun is noticeably shorter than on the old 27. Throw in the fact that the 627 -- at least the PC 627 -- is cut for moonclips and I'd say it's the perfect large frame revolver.
|
Ding, Ding, Ding...WINNER !!!!
Have been having a case of "lack-o-pnr-itis" of late but...EVERY time I think of parting with my 627PC UDR I take it out, look at it, hold it, dry fire it (or live fire it) and there go any thoughts of trading or selling it. And its not even my prime defensive revolver (7 shot 686 is that role at the moment) but it is a superbly built revolver and imo the equal to ANY that Smith has put out in the last 60 years or so. Including pre 27's, 27's, 27's 1 and/or 2's, 27-3's, etc. And I've owned several P&R 27's over the years. The "short stroke" pull of the 8 shooters is a unique cadence to shoot well but having much more power and every capacity of a 1911 is something to think about. And hold onto. ANd to top it all off, the darn thing is one of the most accurate Smith's I've EVER shot.
Just my .02 and I'll probably find a 27-2 one of these days, a beater to well...beat, but that 627 is a true keeper imo. YMMV and almost certainly will.
|
07-12-2011, 10:11 PM
|
US Veteran
|
|
|
Join Date: Feb 2011
Location: God's country, GA
Posts: 1,605
Likes: 427
Liked 990 Times in 445 Posts
|
|
I hate you guys! As soon as I think I've scratched the 357 itch, you go and put up pictures of your beautiful revolvers, and I just want another... and another. Oh well, I guess there are worse problems to have.
For what little it is worth, if funds are an issue, the 627 Pro Series is a nice gun, too. I don't suppose it is quite as nice as a PC gun, but for what you get, it is a good deal.
__________________
Proud anachronism
|
07-13-2011, 07:48 AM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
No, funds are not an issue right now. I would rather get what I want right off the bat.
Now I'm trying to figure out if I like the 627PC or the 627 V-Comp more.
Sent by Brown's Custom Grips using Tapatalk!
|
07-13-2011, 09:32 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
Alright, now I'm on the fence again. I was just about set on the 627PC....then I talked to my old man about it. He made fun of me for wanting a .357. He's a .44 Mag man and he says I need the 629PC for more power. He says I should get the .44, especially if I wanted to carry the gun with me deer season.
But I've never enjoyed shooting .44 mags. It's just a little too much recoil to be enjoyable to me. For a hunting pistol only, it would be okay. But I don't want to spend the money on a PC gun and only shoot once a year before deer season. I just can't figure out if I should toughen up and get used to shooting a .44 mag more or if I should go with a caliber I know I enjoy and just be more cautious with shot placement if I decide to take the 627 hunting. Anyone have any advice?
|
07-13-2011, 09:45 PM
|
|
Member
|
|
|
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,421
Likes: 3,131
Liked 22,773 Times in 5,882 Posts
|
|
Quote:
Originally Posted by Cirrus
Alright, now I'm on the fence again. I was just about set on the 627PC....then I talked to my old man about it. He made fun of me for wanting a .357. He's a .44 Mag man and he says I need the 629PC for more power. He says I should get the .44, especially if I wanted to carry the gun with me deer season.
But I've never enjoyed shooting .44 mags. It's just a little too much recoil to be enjoyable to me. For a hunting pistol only, it would be okay. But I don't want to spend the money on a PC gun and only shoot once a year before deer season. I just can't figure out if I should toughen up and get used to shooting a .44 mag more or if I should go with a caliber I know I enjoy and just be more cautious with shot placement if I decide to take the 627 hunting. Anyone have any advice?
|
Buy what makes You happy, not what someone else thinks you should own.
Many deer have fallen to the 357 Magnum
|
07-13-2011, 11:48 PM
|
US Veteran
|
|
|
Join Date: Jan 2007
Location: up-state SC
Posts: 759
Likes: 134
Liked 90 Times in 49 Posts
|
|
I'd go for an older gun. As time goes by they will continue to increase in price and will eventually all end up in the hands of folks who will refuse to part with them. The quality and craftsmanship is better. I hate to say it but the new S&W's that I've handled and shot can't compare with the older models. Get a good 27 while you can. You can always pick up a new gun later if you happen to still want it.
|
07-14-2011, 09:16 AM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
Quote:
Originally Posted by colt_saa
Buy what makes You happy, not what someone else thinks you should own.
Many deer have fallen to the 357 Magnum
|
I understand what you're saying. And I tend to give the same advice to others who pose the same kind of questions on forums. But this is my old man we are talking. I hold his opinion very high and he's always given me good advice. This reminds me of when I was little, we were both big into ATVs. I would always want to play it safe a ride the smaller bikes and dad was always pushing me to ride the bigger, faster bikes. I would muster up the courage and try the bigger bikes and was always glad I did in the end. For some reason, this situation reminds me so much of those times.
Sent by Brown's Custom Grips using Tapatalk!
|
07-14-2011, 09:28 AM
|
Member
|
|
|
Join Date: Feb 2011
Posts: 565
Likes: 6
Liked 13 Times in 8 Posts
|
|
I dont own a M627, but have shoot them. They are nice shooters of course.
having said that, I am bias because all I like are older, nice blued S&W's. I own several 27's . I just think they are a great gun, all the way around.
I am not saying the 627 is not, just my preference.
If you wanted to save a few bucks and still have a winner( in my opinion) look for a nice Highway Patrolman, I love my 28-2's........
|
07-18-2011, 01:13 PM
|
Member
|
|
|
Join Date: Mar 2011
Location: California
Posts: 25
Likes: 0
Liked 4 Times in 3 Posts
|
|
Quote:
Originally Posted by Cirrus
I put this in the newer thread because I'm kind of leaning toward the PC, but I could be swayed. I'm in the market for a big N frame 357 and I'm having a hard time deciding on the two. I've shot the 27 and really like it, but I've never shot the 627PC and I like the look of the PC. I don't have a dedicated purpose for the gun. Just something that I can shoot some hot 357 loads through without worrying about the gun. This would be a 357-only gun. No 38s would be shot with it. Any thoughts or recommendations on the two would be appreciated. Thanks!
|
Just do it!
I have a 627PC and it has now become my favorite handgun to shoot - super accurate, fantastic trigger, great looking and 8 shots of .357 to boot!
Worth the extra $'s in my opinion.
If someone were to invade my home at night it is (now) the gun that I would reach for (along with my Howard Leight Electronic Earmuffs - I'll let the burgler be the one who goes deaf which is probably going to be the least of his resulting health issues )
Bob
Last edited by PotShotter; 07-18-2011 at 01:26 PM.
|
07-18-2011, 05:41 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
Well, I found a shop that has a NIB 627 V-Comp for $1300 +$25 shipping +$15 transfer fee, so I'd be in for $1340 total. Buds has the 627PC for $960 with free shipping and $15 transfer fee, so $975 total. So for $365 difference, I think the V-Comp just isn't worth that much more than the PC.
Sent by Brown's Custom Grips using Tapatalk!
|
07-19-2011, 02:00 PM
|
Member
|
|
|
Join Date: Mar 2011
Location: California
Posts: 25
Likes: 0
Liked 4 Times in 3 Posts
|
|
Personally I would still stay away from the V-Comp version if I were buying this revolver over again.
I like to get my pistols "showroom clean" again each time after shooting them and I have enough trouble with my 627 PC in that regard (although I don't really regard this as a tedious chore).
But that "compensator" attachment at the end of the V-Comp barrel must be an absolute dog especially if you are a clean freak like me.
I also haven't really seen the need for it myself except for looking good in "photo shoots" (and I also heard that many V-Comp owners actually remove them to avoid cleaning it).
|
07-19-2011, 06:50 PM
|
Member
|
|
|
Join Date: Jun 2006
Location: New Orleans, LA
Posts: 1,486
Likes: 3,155
Liked 3,122 Times in 776 Posts
|
|
A) Buy THIS
B) Invite your Dad to shoot it with 125 grainer .357 mags
C) Enjoy for life.
I've owned LOTS of .357's over the years, 27's, pre 27's , 28's (nope, never a Reg Mag, too rich for my blood/wallet) and this lil ole PC blaster is one of the finest items Smith has produced in years imo. VERY smooth trigger, waaaay more accurate than I can hold it, and if 8 rounds of .357 flamethrower action in rapid succession doesn't float your boat...er...check your pulse.
Last edited by .357magger; 07-19-2011 at 07:02 PM.
|
07-30-2011, 04:55 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
Well, I just bought a 627-5 Performance Center that another member posted for sale in the classifieds section here. I paid the $850 that he asked, which included shipping. My FFL will do the transfer for $15 so I will have $865 in the gun. I hope the condition is as good as I'm expecting it to be. It came with the aluminum performance center case, two sets of grips, and moon clips. I will post some pictures as soon as I can. I'm anxious to see this thing in person.
|
07-30-2011, 06:13 PM
|
US Veteran
|
|
|
Join Date: Jan 2010
Location: east central fla.
Posts: 1,194
Likes: 319
Liked 373 Times in 200 Posts
|
|
hello cirrus,your gonna be happy,after reading your last post ,i had to look at it again,there is not a flaw on it,you will be happy
|
07-30-2011, 08:11 PM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
Quote:
Originally Posted by sqhead
hello cirrus,your gonna be happy,after reading your last post ,i had to look at it again,there is not a flaw on it,you will be happy
|
Thats good to hear. I'm just anxious because I took a chance and I've never even handled a 627 or a PC gun so I'm just excited to get my hands on something new.
I trust that the gun is exactly as you described it. I just tend to get like a kid in a toy store when I have to wait on a new gun. You probably know the feeling too.
Sent by Brown's Custom Grips using Tapatalk!
|
07-30-2011, 08:28 PM
|
US Veteran
|
|
|
Join Date: Jan 2010
Location: east central fla.
Posts: 1,194
Likes: 319
Liked 373 Times in 200 Posts
|
|
i do,i'm waiting on a 4 in. 617,w/ box etc.,coming from a forum member in wash. state,it's hard to buy w/out being able to put your hands on it.but i trust more here than anyplace else,i've had good luck
|
08-06-2011, 08:14 AM
|
|
Member
|
|
|
Join Date: Oct 2010
Posts: 319
Likes: 5
Liked 138 Times in 22 Posts
|
|
The gun came in to my FFL yesterday and I was very excited to pick it up. It is in excellent condition. I couldn't be happier. Thanks sqhead!
|
The Following User Likes This Post:
|
|
01-23-2012, 05:11 PM
|
Member
|
|
|
Join Date: Jan 2012
Location: NE Ohio
Posts: 219
Likes: 109
Liked 82 Times in 42 Posts
|
|
Quote:
Originally Posted by Cirrus
The gun came in to my FFL yesterday and I was very excited to pick it up. It is in excellent condition. I couldn't be happier. Thanks sqhead!
|
Are those ahrend's grips?? thanks
__________________
God Bless Our Troops.
|
01-23-2012, 06:25 PM
|
|
Member
|
|
|
Join Date: Jul 2005
Location: NC
Posts: 30,782
Likes: 59,003
Liked 53,593 Times in 16,703 Posts
|
|
Quote:
Originally Posted by Shooting4life
I would get a 627. I love blued guns and have a could of 27's but the stainless guns are just easier to care for. Here are my two 627's a 627-0 and 627pc "blood work"
|
I'd love to have that no-lock 627 UDR. Was thinking of the new one with the lock but haven't been able to do it.......................yet.
__________________
Sure you did
|
03-05-2012, 04:16 AM
|
|
Member
|
|
|
Join Date: Feb 2005
Location: Cocoa Beach, Florida
Posts: 10,421
Likes: 3,131
Liked 22,773 Times in 5,882 Posts
|
|
Are you still looking?
One popped up on Gunsamerica last night
Quote:
Originally Posted by Cirrus
Great information. Bummer to hear about their scarcity. It seems like I have taste for things difficult to find. I like the integrate scope base. I'd had thoughts in the past about a reflex/holo sight on a hunting revolver that could be easily taken off for general fun shooting. That gun would have been perfect. I will keep my eye out for one, but better be looking for an alternate.
Sent by Brown's Custom Grips using Tapatalk!
|
|
03-05-2012, 12:20 PM
|
Member
|
|
|
Join Date: Nov 2004
Location: Michigan, USA
Posts: 2,164
Likes: 2
Liked 117 Times in 85 Posts
|
|
Since you do not have a dedicated purpose either the 27 or 627 will fit your needs.
|
04-28-2012, 11:42 AM
|
|
Member
|
|
|
Join Date: Sep 2011
Location: elderton, pa
Posts: 38
Likes: 9
Liked 12 Times in 7 Posts
|
|
Quote:
Originally Posted by .357magger
A) Buy THIS
B) Invite your Dad to shoot it with 125 grainer .357 mags
C) Enjoy for life.
I've owned LOTS of .357's over the years, 27's, pre 27's , 28's (nope, never a Reg Mag, too rich for my blood/wallet) and this lil ole PC blaster is one of the finest items Smith has produced in years imo. VERY smooth trigger, waaaay more accurate than I can hold it, and if 8 rounds of .357 flamethrower action in rapid succession doesn't float your boat...er...check your pulse.
|
how many moon clips does she come with?
|
04-28-2012, 03:42 PM
|
Member
|
|
|
Join Date: Sep 2007
Location: SW Montana
Posts: 72
Likes: 4
Liked 6 Times in 6 Posts
|
|
Quote:
Originally Posted by Cirrus
The gun came in to my FFL yesterday and I was very excited to pick it up. It is in excellent condition. I couldn't be happier. Thanks sqhead!
|
Congrats on your new revolver.
I have one also and love it...good shooting!
What holster are you going to get for it?
Here is an article about SW 627's:
PERFORMANCE CENTER .357 MAGNUMS
Last edited by mtscout; 04-28-2012 at 03:55 PM.
Reason: additional thought
|
04-28-2012, 07:32 PM
|
|
Member
|
|
|
Join Date: Mar 2011
Location: Fort Lauderdale, FL
Posts: 1,548
Likes: 54
Liked 1,140 Times in 364 Posts
|
|
I have the next step down from a PC model
I just recently got it, and had it to the range one time.
I really enjoyed shooting it.
My first N frame.
Last edited by Florida Guy; 04-28-2012 at 07:44 PM.
|
|
Tags
|
1911, 327, 357 magnum, 617, 627, 627pc, 686, colt, compensator, fluted, grooved, highway patrolman, idpa, lock, m627, model 27, patrolman, performance center, registered magnum, saa, scope, springfield, walther |
Posting Rules
|
|
|
|
Similar Threads
|
Thread |
Thread Starter |
Forum |
Replies |
Last Post |
New to me 627PC
|
wnwitzell |
S&W Revolvers: 1980 to the Present |
7 |
10-29-2016 01:04 PM |
686 pc 2.5 or 627pc ?
|
o2gt |
S&W Revolvers: 1980 to the Present |
13 |
10-19-2015 08:09 AM |
627PC
|
Cal44 |
S&W Revolvers: 1980 to the Present |
5 |
03-10-2014 05:18 PM |
627PC
|
Old Seabee |
WANTED to Buy |
2 |
02-05-2011 05:22 AM |
627PC or 627PC with lock
|
t0066jh |
S&W Revolvers: 1980 to the Present |
22 |
02-15-2009 07:02 PM |
|