Mr Sinko, I am digging that 625! Big bore goodness is a small package.

__________________
Proud anachronism

624LH 3"RB with her ElPaso Saddlery Tortillia

Pehaps turn one of my 696s into a fixed-sight model?

Don't know why I only posted my 3" magnum, this would be my go-to piece if I couldn't pack a commander 1911 in an urban setting.

250g cast SWC's don't bounce off much when they're moving along @ 900fps.

624 no dash

If three and a half inches counts, then this one:


If not, then this 624:

I like my 547, but I lust for 65 Ladysmith and feel the need for a 3" 940.

.38 Special Chief w/3" bbl.

My idea is epitomized in this picture (although it's hard to see) of a Karl Sokol modified K frame. The end result is a 2.5" barrel with big dot sight, bobbed hammer, rounded trigger, round butt and dark finish. I don't really know what it started life as, it could be any of the fixed sight K frames and any would suit me just fine.

The Perennial Snubbie | American Cop Magazine

Mine...plus the Super K 66 3", Lew Horton limited 66 3"...

I carry my 629 Lew Horton Quad ported with Badger grips with Mother of Pearl insert.

Only one of 300 made..... Great gun..

__________________
SWCA #2306
DAV in honor of POP

My 3 inch CS-1 is my favorite. If you have one you know what I'm talking about. If you don't own one I know you want one. If I was hitting the back woods trails in bear country I'd pack along my 3 inch custom Redhawk. I won't spend any time bragging about a Ruger on a S-W sight though.

no metion of the S&W m60 pro??????

My 317 with a 3" barrel is lighter and easier to carry than this 2 3/4" one, so I guess what I consider an ultimate carry piece depends on why I happen to be carrying at that particular time.
Mark

Did you skip page 4 of this thread? Three of us mentioned it and two of us posted pictures of the beasts.

Here is my newly acquired 66-5 3.25" It is my only 3" S&W, so it will have to qualify as my "Ultimate 3 Inch Carry Piece". I still need to get it to the range, but it does point really well. Assuming it shoots as well as I expect it to, it will become my primary carry piece. Next step is to get some decent wood grips and a leather holster, then the rig will be comlete.

Attached Images

S&W_66-5_2011-0916_1.jpg (72.5 KB, 53 views)

586 or fluted 629.
Unfortunately, that'll prob'ly never become a reality for me unless someone discovers a truckload of 'em somewhere and it drives down the prices.

624 and 625

__________________
WILL WORK FOR AMMO!

My favorite 3" is a model 64

Attached Images

IMGP5409.jpg (83.3 KB, 50 views)

Another vote for the 3 plus 1/2 an inch with the Model 27

__________________
Vaya con Dios

Model 60 PRO.

Yeah, I know the 325NG isn't exactly three inches, but it's so close...

The 3 1/2" M27 (eight shot) or 3" M66; gold bead front sight, tuned action, square butt, Spegel checkered cocobolo boot grips, Summer Special 2 cowhide on a Mernickle belt & speedloader holder, 5 Star or Safariland Comp 2 speedloaders, Tuff strips Quickstrips. With a big cold glass of my wife's sweet tea.

Those 3" M625's look good too.

__________________
July 4, 1776 not Jan 30, 1909

__________________
Bill - SWCA #2327

If you'll stretch the 2.750" barrel a little, will it qualify as a 3"?
It's just a small .500

And a VM II look alike from a custom holster maker near me.

A serious gun belt is required...

Business end of the beast.

S&W 65-3, 3". Had the cylinders chamfered and an orange insert cut into the front sight - it already had a sweet trigger when I got it... The 640-1 is a little short for this thread, but us great notheless!





Rhino