wide triggers for DA?

hotrod150

hotrod150

Member
Joined
Sep 19, 2012
Messages
2,647
Reaction score
762
Location
western Washington
Apparently sometime in the mid-80's (1985?), S&W started putting the "combat trigger" on their j-frames as standard equipment. My pinned Chiefs all have the .240" serrated trigger, while a 1985-ish Chief I used to own had the .312" wide smooth trigger. A wide (serrated) trigger is nice for single-action shooting, but personally I much prefer the narrow trigger (with the serrations ground off & the top rounded) for double action shooting over the wide trigger. How does everybody else feel about these triggers?
I previously owned a 442-2 and am in the process of buying another (used) one. I would like to swap the trigger out for a narrow one, but have never had any luck with triggers just dropping in so will probably just leave it be.
 
  • Like
Reactions: Rpg
Register to hide this ad
I happen to like wide/combat smooth triggers on SD/CC revolvers.
Some don't, so be it.
I have changed many to combat triggers with no problems, have a box full of triggers & hammers for all S&W's now.... LOL!
 
Triggers

For a duty or carry revolver, I prefer the narrow trigger, with the serrations removed and the edges of the trigger face rounded....I have altered all of my carry/duty guns in this fashion....everybody has their own preferences.....this approach works best for me.
 
I prefer the narrow grooved trigger. Why a trigger needs to be smooth to be called "combat" is something I'll never understand. Jerry Miculek articulates the reason for the grooved trigger very well, yet putting eight shots into a target in 1.00 second is not a combat worthy performance?

Dave Sinko
 
Jerry Miculek has stated he doesn't care for a smooth trigger.
I prefer a smooth trigger for a double action revolver.

I'm no Jerry Miculek. But I say which ever one you like and works for you is the way to go.. I don't believe in the one size fits all..

I suppose the term 'combat' is just a description, like 'target' trigger.

But, I thought everything had to be 'Tactical' now,,
 
Last edited:
Lke I said, I prefer a narrow trigger, but I haven't ever had much luck swapping triggers so I'll leave the wide one in my new-to-me 442-2. But I don't care for the sharp corners of the trigger blade, I've had trouble with those biting me before. I don't know much about MIM parts- will smoothing off the corners result in going down into softer material? I plan on hitting the ground-off places with cold blue.
BTW I swapped out the rebound spring for a 13# Wolff yesterday, and the spring I removed was painted blue. Does S&W paint their springs? I watched an Apex how-to video for their j-frame spring kit and I noticed they removed a blue rebound spring and installed a green one.
 
Last edited:
I like a wide, smooth trigger.
I want to replace my 15-3 hammer and trigger with a target hammer and a wide, smooth trigger.
I want to replace my 586 hammer and trigger with a target hammer, and a wide, smooth trigger. It already has a wide, smooth trigger, but the trigger and hammer have finish issues, having been an evidence locker gun.

Gunparts dot com seems to be out of the K frame target hammer and trigger, and the .400 L frame trigger.

Maybe I just need to strip mine and hot blue them.

I'm not sure about my 15. The gun is almost perfect.
I just like the long, wide target hammer spur and wide trigger better.
 
Jaymo said:
I like a wide, smooth trigger.
I want to replace my 15-3 hammer and trigger with a target hammer and a wide, smooth trigger.
I want to replace my 586 hammer and trigger with a target hammer, and a wide, smooth trigger. It already has a wide, smooth trigger, but the trigger and hammer have finish issues, having been an evidence locker gun.

Gunparts dot com seems to be out of the K frame target hammer and trigger, and the .400 L frame trigger.

Maybe I just need to strip mine and hot blue them.

I'm not sure about my 15. The gun is almost perfect.
I just like the long, wide target hammer spur and wide trigger better.
Click to expand...

Look in GB gun parts, you will find many of the ones you want.
 
I much prefer the narrow trigger smoothed out.

The wider trigger is inferior in my opinion.

Of course, this is just my opinion and my preference.
 
My 19-4 4" came with wide target hammer & Trigger. I actually liked the feel of the wide target trigger for combat style shooting - back in the day at least. I recently acquired a minty 19-6 6", and I intend to turn my old 19 into a strictly combat oriented revolver -- and thus will change the trigger to a medium-wide, smooth combat trigger.

I will then put the old wide target trigger on my new-2-me 19-6 and turn that into a dedicated target gun -- with some PPC thrown-in on occasion.
 
As you can see, feel is a very subjective thing, much like beauty.
Some of us prefer wide/smooth, some prefer narrow/smooth, some prefer wide/grooved, and some prefer narrow/grooved.

Now, that we've made your decision more difficult with our lack of consensus, you'll have to decide which of us with whom you agree.

Go with what feels right to your trigger finger.
Grooved triggers make my finger sore after a box of ammo.
Others have no such problems.
My buddy loves the Videki speed trigger on his 1911.
I hate it.
Subjective.
There's no accounting for taste, etc.
I hate the way SUVs and luxury cars drive, others love them.
Perception, taste, all subjective and infinitely debatable.

I've been no help at all, have I?
For that, I apologize. I just know what feels good to me.

For the record, I can understand both sides of the wide/smooth vs narrow/smooth debate.
My 586 feels great with it's wide/smooth trigger.
A J frame may or may not.
A Colt D frame feels great to me, with a narrow/smooth trigger.

Even more important to me, than wide vs narrow, is that it be smooth.
I like grooved for single action range fun. Sometimes.
Mostly I prefer smooth.
I've thought about defiling my K and J frames by smoothing/rounding the triggers.
I just don't feel right about doing it to the stock trigger.
Maybe I should buy spares to smooth.
I don't like to make irreversible changes to guns as old as/older than me.
 
I have two revolvers with MIM triggers.
A 442-2 and a new 640 Pro.
I like the new MIM triggers better than the one on my departed M60 no dash. They seem nicely rounded and the width is just about right.
If I had kept the M60, I would have worked on the trigger.
I don't know if MIM triggers come in different widths. I assumed they were all the same. S&W seems to be eliminating options in such matters.
I had a Ruger SP101 for awhile, and I didn't like the trigger profile or the action. Back to S&W revolvers.

Best,
Rick
 
The width of the trigger is not as critical as the smooth surface for double action shooting. I have all three width's in various examples, and all with the grooves removed for double action shooting. My favorite for PPC was my 686 (no dash) with a case hardened .500 target trigger which has been smoothed out and contoured.
 
sidrow11 said:
Could you please direct me to where Miculek articulated his
preference for the serrated trigger?
Thanks,
Sid
Click to expand...

I'd say the biggest hint would be the fact he includes a grooved trigger on his signature series 625 JM guns.


Personally, I prefer a smooth narrow trigger.
 
I know Miculek articulates his desire or the grooved trigger in his video. He doesn't want his finger sliding around the trigger when he's shooting DA at high speed. It's important to note that he uses the pad of the trigger finger and NOT the crease. This is an important distinction, as most who prefer the smooth triggers also contact the surface of the trigger with the crease. I pull the trigger of all firearms (except J Frames only because they're so small) with the pad of my finger and it's the reason I prefer grooved triggers on all my firearms, not just my revolvers. I have a lot of trouble managing DA revolvers that have smooth triggers. Rather than fit new triggers, I simply cut two grooves into the face of the smooth .312" triggers in my revolvers. This gives me the feel that I need and is a perfect compromise, as those who shoot my revolvers with the two grooves and use the crease don't even know that there are grooves in the trigger.

During high speed shooting, much time is lost by the action of curling and uncurling the trigger finger when the crease is used to pull the trigger. Most here don't seek to break Miculek's record and you can be fast and accurate using the crease, but when you're trying to chisel precious hundredths of a second off your split times, even the slightest variation of technique is of great importance.

Dave Sinko
 
David Sinko said:
I know Miculek articulates his desire or the grooved trigger in his video. He doesn't want his finger sliding around the trigger when he's shooting DA at high speed. It's important to note that he uses the pad of the trigger finger and NOT the crease. This is an important distinction, as most who prefer the smooth triggers also contact the surface of the trigger with the crease. I pull the trigger of all firearms (except J Frames only because they're so small) with the pad of my finger and it's the reason I prefer grooved triggers on all my firearms, not just my revolvers. I have a lot of trouble managing DA revolvers that have smooth triggers. Rather than fit new triggers, I simply cut two grooves into the face of the smooth .312" triggers in my revolvers. This gives me the feel that I need and is a perfect compromise, as those who shoot my revolvers with the two grooves and use the crease don't even know that there are grooves in the trigger.

During high speed shooting, much time is lost by the action of curling and uncurling the trigger finger when the crease is used to pull the trigger. Most here don't seek to break Miculek's record and you can be fast and accurate using the crease, but when you're trying to chisel precious hundredths of a second off your split times, even the slightest variation of technique is of great importance.

Dave Sinko
Click to expand...

I appreciate the response. That explanation was what I was looking for.
Have recently become very enamored with revolvers. Been shooting mostly Glocks the last 15 years. Found this forum and will mine some of the excellent content as time permits.
Thanks, again.
Sid
g
 
I like medium-wide, smooth triggers with no sharp edges for all purposes. Jerry Miculek is certainly impressive, but his mindset and muscle memory are so strongly imprinted that if he were in a defensive scenario, I'd think he'd have to "dumb it down"! :) I was fortunate enough to take some double-action revolver shooting training with Jim Cirillo at the Federal Law Enforcement Training Center. I'll always remember his mantra: "Roll the trigger, roll the trigger...".
 
David Sinko said:
.....
During high speed shooting, much time is lost by the action of curling and uncurling the trigger finger when the crease is used to pull the trigger. Most here don't seek to break Miculek's record and you can be fast and accurate using the crease, but when you're trying to chisel precious hundredths of a second off your split times, even the slightest variation of technique is of great importance.
Click to expand...

I'm not working with a timer or actually shooting live rounds, but just dry-firing I can see no difference in the elapsed time using the pad of my finger vs the joint. FWIW I use the pad of my finger for SA shooting, but shooting DA (at least with j-frames) I use the joint (or crease, as David puts it).
 
riverrat38 said:
........
I don't know if MIM triggers come in different widths. I assumed they were all the same. S&W seems to be eliminating options in such matters. ........
Click to expand...

A while back, I had a 1985-ish no-dash model 60, and it came with a .312" wide smooth combat trigger. If S&W put that on a plain-jane (stainless) Chief, I suspect that "narrow service triggers" were on their way out by then.
 
You must log in or register to reply here.

Similar threads

O
Finishes on MIM Hammer/Triggers
Replies
3
Views
273
OldLawman
O
yober
A little disappointed in PC triggers that don’t deliver.
2
Replies
24
Views
1K
Model 15-4ever
M
zogger
New Model 586-8, What is the DA Trigger Weight?
Replies
3
Views
306
zogger
zogger
Mannlicher
Manufacture Date for Model 629-5?
Replies
6
Views
192
Mannlicher
Mannlicher
B
Looking for Date for 686
Replies
3
Views
299
Hawg Rider
H

Latest posts

Back
Top