|
![Reply](https://smith-wessonforum.com/images/blue_style/buttons/reply.gif) |
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-11-2016, 12:26 AM
|
Member
|
|
|
Join Date: Aug 2010
Posts: 5
Likes: 3
Liked 1 Time in 1 Post
|
|
Pitting?
Can someone please possibly explain how this damage was caused and what I can do to prevent it? Image is attached. That particular area is shinier than the rest.
The revolver was oiled and kept indoors with low humidity.
Thank you
Last edited by otho11; 03-11-2016 at 12:28 AM.
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-11-2016, 12:39 AM
|
Member
|
|
|
Join Date: Jan 2008
Location: Hammond in U.S.A.
Posts: 2,104
Likes: 1,378
Liked 4,036 Times in 965 Posts
|
|
You are probably the second owner . the previous had rubber grips on it and moisture under the grip could not escape and caused the pit .It may have been polished up and did not show.
|
The Following 4 Users Like Post:
|
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-11-2016, 12:43 AM
|
Member
|
|
|
Join Date: Aug 2010
Posts: 5
Likes: 3
Liked 1 Time in 1 Post
|
|
I am the second owner and the previous rubber grips were replaced. Thanks for your help.
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-11-2016, 12:51 PM
|
![chief38's Avatar](https://smith-wessonforum.com/image.php?u=142045&dateline=1377745995) |
Member
|
|
|
Join Date: Apr 2006
Posts: 18,028
Likes: 8,007
Liked 26,382 Times in 8,859 Posts
|
|
It is VERY TRUE that Pachmeyer Grips (specifically) have caused damage to two of my firearms as well over the years. Fortunately I discovered it before anything major occurred. Not only do Pachmeyer's not allow moisture to escape, but Pachmeyer's have a steel insert that has a bad habit of cutting through the rubber, contacting the gun and rusting away or scratching the finish up.
I have not used Pachmeyer grips in 25 years and if one must use rubber style grips, Uncle Mikes are far superior and contain NO metal inserts to cause havoc.
Now that I have said that - and while not nearly as bad as Pachmeyer's, wood and other materials can also trap moisture and allow the guns grip frame to start rusting and pitting. Every single time I clean a gun the grips come off! Not only is it good to see what is happening underneath the grips, but it's also good to clean and lightly lubricate the metal with a light coat of wood, rubber and synthetic friendly oil/protectant. Another reason I use Rig #2 Oil. It does NOT harm wood, rubber, polymer, or any other material common to guns and prevents rust from starting. I STILL check anyway.
Last edited by chief38; 03-11-2016 at 12:52 PM.
|
The Following 2 Users Like Post:
|
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-11-2016, 03:58 PM
|
![chief38's Avatar](https://smith-wessonforum.com/image.php?u=142045&dateline=1377745995) |
Member
|
|
|
Join Date: Apr 2006
Posts: 18,028
Likes: 8,007
Liked 26,382 Times in 8,859 Posts
|
|
Oh, and by the way, once in a while I also remove rifle and shotgun stocks to inspect, clean and lubricate the metal under the wood. AGAIN, use NO oil or chemical that remains wet or is hurtful to wood or synthetic. The stuff I use evaporates before reassembly, leaves protection behind and protects metal without harm or softening of wood. I do not do this often, just every once in a while but definitely when caught in a downpour while Hunting or shooting Sporting Clays.
|
The Following User Likes This Post:
|
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-11-2016, 08:27 PM
|
Member
|
|
|
Join Date: May 2001
Posts: 1,428
Likes: 0
Liked 956 Times in 418 Posts
|
|
An excellent method of preventing rust and pitting under any kind of grips is to apply a medium heavy coat of wax and just let it dry for 20 minutes. Don't wipe it off.
Once it's dry remount the grips. The wax will seal the metal and prevent corrosion and won't run off the metal or soak in wood like oils and greases will.
Good waxes to use are Johnson's Paste Wax in big yellow cans at hardware and Walmart stores, or the fine Renaissance Museum Wax available from Brownell's.
Note that car wax is NOT suitable for this purpose.
|
The Following 2 Users Like Post:
|
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-11-2016, 09:39 PM
|
![andyo5's Avatar](https://smith-wessonforum.com/image.php?u=123992&dateline=1439489960) |
Member
|
|
|
Join Date: Aug 2007
Location: Oro Valley, Arizona
Posts: 2,369
Likes: 497
Liked 945 Times in 518 Posts
|
|
I don't know of any grips, wood or rubber, that cover the area that you are showing.
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-11-2016, 09:55 PM
|
![tlay's Avatar](https://smith-wessonforum.com/image.php?u=155065&dateline=1365104275) |
Member
|
|
|
Join Date: Oct 2007
Location: Northern Indiana
Posts: 2,860
Likes: 1,594
Liked 1,977 Times in 732 Posts
|
|
This can happen on stainless guns too. I had a model 60 that pitted and rusted under the grips.
__________________
Tom
NRA Pistol Inst
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-12-2016, 06:03 AM
|
Member
|
|
|
Join Date: Aug 2010
Posts: 5
Likes: 3
Liked 1 Time in 1 Post
|
|
Quote:
Originally Posted by andyo5
I don't know of any grips, wood or rubber, that cover the area that you are showing.
|
It had Bianchi hammer shroud grips when I bought it.
Is this damage something that can be repaired for a reasonable cost or better to leave as is?
|
The Following User Likes This Post:
|
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-12-2016, 06:51 AM
|
SWCA Member
|
|
|
Join Date: Apr 2005
Location: Oklahoma
Posts: 4,785
Likes: 3,305
Liked 4,966 Times in 1,952 Posts
|
|
Quote:
Originally Posted by otho11
Is this damage something that can be repaired for a reasonable cost or better to leave as is?
|
In my limited experience, the answer to your question (in order) is no and yes.
|
The Following User Likes This Post:
|
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-12-2016, 09:42 AM
|
![chief38's Avatar](https://smith-wessonforum.com/image.php?u=142045&dateline=1377745995) |
Member
|
|
|
Join Date: Apr 2006
Posts: 18,028
Likes: 8,007
Liked 26,382 Times in 8,859 Posts
|
|
Yes the damage could be repaired somewhat (the pits do not look too deep) but in order for you to have it look perfect the gun would have to be re-finished by bead blasting it after pit removal sanding. You could just work on the Sideplate, but then it would not match the rest of the finish. The rust itself can be removed rather easily with an oily bronze wool pad, but the pits would need additional sanding followed by re-finishing. You could call S&W and ask what they charge or you could do the entire gun yourself and while it may not match the Factory finish, at least it would be uniform all over - if you are good at this sort of thing of course.
If that were mine I'd probably give it a shot myself and if I still wasn't happy I'd send it off to Smith for a professional re-finishing.
|
The Following 2 Users Like Post:
|
|
![Old](https://smith-wessonforum.com/images/blue_style/statusicon/post_old.gif)
03-12-2016, 09:48 AM
|
![Muss Muggins's Avatar](https://smith-wessonforum.com/image.php?u=245049&dateline=1704577282) |
Member
|
|
|
Join Date: Mar 2014
Location: bootheel of Missouri
Posts: 16,957
Likes: 7,013
Liked 28,273 Times in 8,961 Posts
|
|
Quote:
Originally Posted by andyo5
I don't know of any grips, wood or rubber, that cover the area that you are showing.
|
In addition to the grips the OP described that came with the pistol when he bought it, there are others. My CT laser grips (it looks like that's what's on his pistol now) cover that area on my 60-14.
__________________
Wisdom comes thru fear . . .
|
![Reply](https://smith-wessonforum.com/images/blue_style/buttons/reply.gif) |
Posting Rules
|
|
|
|
|