|
|
 |
12-21-2016, 04:57 PM
|
|
Member
|
|
|
Join Date: Nov 2011
Posts: 146
Likes: 16
Liked 119 Times in 41 Posts
|
|
Revolver Polishing Services
Thinking of having my new PC 629 polished to a mirror finish. Wondering if anyone has done this and how it turned out? I live in Illinois and would like to find a reputable person where I could drive to and drop it off.
Thanks
|
12-21-2016, 06:57 PM
|
|
Member
|
|
|
Join Date: Nov 2005
Location: Upstate SC
Posts: 3,639
Likes: 62
Liked 5,913 Times in 1,914 Posts
|
|
I mirror-polished a Model 64 one time. A soft cloth, about 1/4 tube of Flitz metal polish, lots of elbow grease, and about 4 hours. Other than the slight color difference, it passed for nickel many times.
__________________
Pisgah
|
|
The Following User Likes This Post:
|
|
12-21-2016, 06:58 PM
|
 |
Member
|
|
|
Join Date: May 2012
Location: Evansville, Indiana USA
Posts: 6,341
Likes: 498
Liked 11,808 Times in 3,627 Posts
|
|
How about a Saturday afternoon "damage-it-yourself" project"? Mother's Mag and Aluminum Polish and some elbow grease.
Or S&W will polish it for you for $275......... Precision Gunsmithing | Smith & Wesson
__________________
Ret. LE, FA Instr, S&W Armorer
Last edited by armorer951; 12-21-2016 at 07:24 PM.
|
12-21-2016, 07:05 PM
|
 |
Member
|
|
|
Join Date: Nov 2013
Location: Virginia
Posts: 3,151
Likes: 2,422
Liked 3,604 Times in 1,603 Posts
|
|
You could send it to Ford's who will perform this work for a couple of hundred dollars. But keep in mind mirror, mark-less polished stainless steel scratches as soon as you breath on it.One of the primary reason a flawless Colt Python in their ultimate stainless will sell for thousands above other Pythons.
|
12-21-2016, 07:06 PM
|
 |
SWCA Member
|
|
|
Join Date: Feb 2003
Location: Michigan
Posts: 7,894
Likes: 13,016
Liked 15,001 Times in 3,595 Posts
|
|
I had a gunsmith (since retired) do a model 66 for me back in the 1970s. Looks good to this day.
|
12-21-2016, 07:15 PM
|
 |
Member
|
|
|
Join Date: Aug 2012
Location: North Dakota
Posts: 10,139
Likes: 14,259
Liked 12,858 Times in 3,498 Posts
|
|
No need to pay to have it done. As others have posted, Mothers Mag or Flitz and some old cotton socks. A fun " sit and watch football" project with great results 
__________________
John
|
|
The Following User Likes This Post:
|
|
12-21-2016, 08:10 PM
|
 |
Member
|
|
|
Join Date: Apr 2006
Posts: 19,249
Likes: 9,318
Liked 30,125 Times in 9,761 Posts
|
|
Not a hard job. Just make sure the gun is totally disassembled and don't get tempted to use power tools.
|
12-21-2016, 08:49 PM
|
 |
Member
|
|
|
Join Date: Apr 2013
Location: Arkansas
Posts: 468
Likes: 124
Liked 558 Times in 196 Posts
|
|
Mother's Mag polish and a cut up white tee shirt.
Something to do while watching TV.
__________________
2B1ASK1
|
12-21-2016, 10:28 PM
|
|
Member
|
|
|
Join Date: Jan 2008
Location: Eastern Nebraska
Posts: 4,540
Likes: 12,517
Liked 9,742 Times in 3,364 Posts
|
|
I am interested in trying this myself but am nervous about messing up... like my math teacher said... show your work...
|
12-21-2016, 11:46 PM
|
|
Member
|
|
|
Join Date: May 2015
Location: Nor Cal
Posts: 388
Likes: 1,060
Liked 493 Times in 179 Posts
|
|
IMG_1208.JPG
Here's a 629 I did last year. I did use power tools and rouge along with elbow grease after disassembly. I've done them by hand too. It takes time and care either way.
Tape off areas you don't want the polishing to touch...like the top strap.
On several, I bead blasted the cylinder indents to give some contrast and a custom look.
On the right side panel I added my own little lasered patriotic American Eagle and Flag. This right side view wasn't finished yet. I just took the picture quickly before it was completed. I have a completed right side somewhere.
As you can tell...I like Culina grips too. I've got a few to dress up for special occasions.
IMG_1230.jpg
They don't scratch that easy with normal care. I use Ren Wax as a finish. All high polish finishes will attract smudges and the like. Just wipe them off. I've shot these and clean them up again. They're pretty...
Here's the same one before I polished it... and it was uglier in person.
629 before.JPG
Last edited by sturtyboy; 12-21-2016 at 11:49 PM.
|
|
The Following 4 Users Like Post:
|
|
12-23-2016, 08:13 PM
|
 |
US Veteran
|
|
|
Join Date: Jan 2010
Location: The wet side of Oregon
Posts: 6,390
Likes: 9,442
Liked 8,031 Times in 2,455 Posts
|
|
I posted this several years ago when a similar question popped up:
I have polished up a number of really beat up SS Smiths.
For jobs like these, you will need a lot more than Mother's.
I use auto body sandpaper (dry - tried it both ways) cut into 1" wide strips.
Depending on how bad it is, have started out with as coarse as 320 grit.
Different areas will probably need different grits to start. You may even need to use a fine file to smooth out deep gouges, usually the bottom of the triggerguard where the gun has been dropped.
Strip the gun, re-install the sideplate with all flathead screws. I keep a set of screws just for this purpose.
For the flat areas, I wrap the sandpaper around a little aluminum sanding black I made.
After all has been worked with the first sandpaper, go to the next finer grade. Work it with this one to smooth out all the scratches from the last grade.
Repeat this with finer and finer sandpaper until you end up with 2000 grit.
You will quickly learn that if you don't completely remove the previous scratches before going finer that you will have to back up and do it over, Trust me on this!
After its polished to 2000 all over, start in with Mother's and rub, rub, rub. I start out polishing with a cotton shop rag and end up with a microfiber cloth.
Here are some of the worst that I have done:
This model 67 was a complete junker. $150 at the LGS. Dirtiest and most beat one I ever saw. Soaked 3 days in Ed's red before even starting on it:
This one had a very coarse sandblast finish with lots of pitting (yes, stainless DOES rust!) like it had been a boat gun. It took more work than the others:
This was another well-used gun dinged all over and rusted in a couple spots:
And one that looked as if it had been dragged behind a truck:
Final note: Unless you REALLY know what you're doing, do not use any power tools!
__________________
-jwk-
US Army '72-'95
|
|
The Following 12 Users Like Post:
|
Auburn4, GerSan69, hardcase60, jake1945, Nick B, OLDSTER, S&WIowegan, silvertip43, sturtyboy, Tom S., vonn, Will2 |
12-23-2016, 09:53 PM
|
|
Member
|
|
|
Join Date: Feb 2014
Location: Upstate South Carolina
Posts: 201
Likes: 1,131
Liked 282 Times in 124 Posts
|
|
Golly!!! What a person with time and patience can accomplish. Y'all have done " EXCELLENT ".
|
12-23-2016, 10:38 PM
|
|
Banned
|
|
|
Join Date: May 2007
Location: Montana
Posts: 1,826
Likes: 2,064
Liked 3,140 Times in 645 Posts
|
|
Nice job(S) TAROMAN! That represent one hell-of-a-lot of work!
|
|
The Following User Likes This Post:
|
|
12-24-2016, 07:19 AM
|
 |
Moderator
|
|
|
Join Date: Nov 2015
Location: SE Michigan
Posts: 19,896
Likes: 8,847
Liked 20,024 Times in 6,438 Posts
|
|
Quote:
Originally Posted by TAROMAN
I posted this several years ago when a similar question popped up:
[B]I have polished up a number of really beat up SS Smiths.
For jobs like these, you will need a lot more than Mother's.
I use auto body sandpaper (dry - tried it both ways) cut into 1" wide strips.
Depending on how bad it is, have started out with as coarse as 320 grit.
Different areas will probably need different grits to start. You may even need to use a fine file to smooth out deep gouges, usually the bottom of the triggerguard where the gun has been dropped.
Strip the gun, re-install the sideplate with all flathead screws. I keep a set of screws just for this purpose.
For the flat areas, I wrap the sandpaper around a little aluminum sanding black I made.
After all has been worked with the first sandpaper, go to the next finer grade. Work it with this one to smooth out all the scratches from the last grade.
Repeat this with finer and finer sandpaper until you end up with 2000 grit.
You will quickly learn that if you don't completely remove the previous scratches before going finer that you will have to back up and do it over, Trust me on this!
After its polished to 2000 all over, start in with Mother's and rub, rub, rub. I start out polishing with a cotton shop rag and end up with a microfiber cloth.
|
Great reply TAROMAN, that explains why it cost so much to properly polish a stainless firearm. Too many people think that Mothers, Flitz, toothpaste or some other magic formula will do the job. While that stuff may make the gun shiny, it will NOT give the same appearance as a chrome plated finish unless you happened to have a perfectly flawless specimen to start off with. I've seen lots of shiny guns, including some posted here, that still showed what I refer to as 'grain' marks in the stainless. A proper polish job removes these but requires a lot more aggressive action than what Mother's will supply. That's why places charge what they do to polish stainless guns.
__________________
So many S&W's, so few funds!!
|
|
The Following User Likes This Post:
|
|
12-25-2016, 12:29 AM
|
 |
Member
|
|
|
Join Date: Sep 2011
Location: Central Texas
Posts: 1,283
Likes: 2,986
Liked 1,498 Times in 703 Posts
|
|
I saw this information posted in another thread. Perhaps this would be an alternative if you choose to not DIY. I'm sure it's not cheap but IMHO he does good work.
Polishing Stainless Steel Gun to Mirror Finish
Disclaimer: I am in no way affiliated with this vendor nor has this vendor done any work for me. Merry Christmas, hardcase60
__________________
You want me to do what?
|
|
Posting Rules
|
|
|
|
|
Linear Mode
