Search results

So, it looks like the part that the tab is broken off of is called the cylinder retainer. It looks like the only function of those 2 tabs is to keep the cylinder from being removed when the gun is broke open. If that is the case, I wonder how it broke and how it caused the dings on the back of...

Good idea. I started a thread about this gun in gunsmithing. This one can be locked or deleted. Thanks

I have a Schofield 2000 top break revolver that has 2 tabs on the bottom rear of the rear sight that I assume are to keep the cylinder from going back too far during recoil. One of the tabs is broken off as shown. Are these tabs necassary? As you can see, the tabs are making dents on the rear of...

I have a Performance Center Schofield 2000 that has some issues that I need help with. First, as you can see in the picture, the rear of the cylinder is getting dented by the 2 cylinder stop tabs on the rear sight (top latch). Secondly, one of those tabs on the rear sight has broken off. I...

Price reduced for quick sale.

SOLD! Thanks This may be the nicest Smith & Wesson M&P 15-22 .22LR rifle in the Ft.Worth area. It has been heavily upgraded and shoots amazingly well. I have put 600 flawless rounds through it without any feed or ejection issues. Very fun to shoot! i built this to replicate my .223/5.56 M&P-15...

I have never had any issues with Golden Bullets in my 15-22 however, I still prefer Winchester M22's.

You re probably right but unfortunately, it's considered gun smithing and, I'm not a gunsmith . Wouldn't want the liability anyway.

Great story!

No. Its solid all the way through.

No epoxy or anything needed. The screw threads into the bottom of each socket . There is 1/8" of plastic between each socket. Solid as a rock.

Well, It turned out pretty good. I am happy with it. I probably did mine a little different then the factory. I took 2 of the long QD sockets that come with Magpul stocks, counter-bored a hole on each side of the receiver, and then joined the 2 sockets together using the original mounting screw...

thank you sir!

I want to drill my receiver to install a magpul QD socket like the ones that come on the Magpul 15/22's. Can someone post a couple of close-up pictures of one installed? Thanks

6.5 lbs. Standard Mil Spec.

Guys, without going into am long review, these ALG Defense QMS Triggers are worth a try. For around $45.00, they are a superb upgrade to the factory trigger. Super smooth with a positive reset. If you are not happy with your factory trigger, this is a good alternative without breaking the bank.

The acetone attacked the polymer and pulled the color agent out of it. There is no fix for it unfortunately short of painting the entire lower. Lacquer thinner will do the same thing to polymer. Don't ask me how I know....

Big difference between polymer and plastic :)

I think the large latch is probably closest to the feel of the medium BCM ,which I run on my AR, but, since the 15-22 handle is smaller than a standard AR handle, I went with the medium latch to keep things more to scale. I would have been happy with either to be honest. I don't think you can...

13" Troy Alpha Rail and Gieselle SSA-E trigger ;)