Search results

got it fixed. the thumb piece was hanging up sometimes. cleaned uo the sides and front . works as designed. thanks for your help rich

center pin is clean and no oil build up thank you rich

the cylinder release moves forward stays then you cannot pul the trigger. if you push the release forward the cylinder will open as designed. somthing is causing the cylinder release not to return

hold the gun in right hand push release with left thumb. once the release goes forward it is not returning. thank you

i have a 686 ssr pro series performance shop revolver. i am haveing two problems. 1 the cylinder binds and will not sing there are two spots in the 6 rounds that are much different feeling trigger pulls,the ejector rod is tight and straight the yoke is liend up with the hole in the frame. 2 on...

my friend is in texas. i think he saw it in a auction book. i didnt think it came from smith with that rib attached. at first i thought it was a ron power ppc rib it rons were much bigger. again thank you rich davis

no pictures. it is blue with a 61/2 bbl. i havent seen that type of rib on any smithe before. that was his main question, thank you for the responses rich davis

checking for a friend he is looking at a .44 hand ejector made in 1908. the listing says fitted with a king super rib. it looks like the vented python rib. any help please thank you rich davis

thank you rich

i tried sending you the picture but it came saying not a good address thank you rich

that is what it looks like. i think i last shot ppc in 1999 or 2000. started shooting trap and got hooked. still doing the trap

checking for a friend. he has a smith 686 that he thinks was build by bill davis. it has a non fluted cylinder. says 1of 500. it has a ppc target stamped on the frame side. it has the standard smith rear adjustable sight. the trigger is the .312 smooth. the poor picture he showed me appears to...

i do and i will check with them rich davis

i wont take your money the guns are as listed. part of why i purchased them.

1 smith and wessom model 15-4 6 inch bbl ser. 264k3672 no box or paper work. finish is great. 2 smith and wesson model 14-3 4 inch bbl. ser. 1k42738. corrwct blue riveted box. cleaning gear with screw drive. no cylinder stop mark on cylinder. great finish and condition. i know you all would...

i was able to purchase a model 17-1 model 10-5 1200.00 for both very happt rich davis

thank you for all the information. the card was from the factory explaining the modifications that were done. if the sa did not come from the factory what modifications were done to make it sa only. were the parts sold so you could convert yourself. thank you rich davis

a friend is looking at a model 14 that has a card from the factory that made it single action only. any info please. thank you rich davis

great info. thank you very much rich davis

trying to find out a little about this kit gun. ser. 36164 2 inch bbl. sq. butt blue steel any information would be great. thank you rich davis