Search results

Have you cleaned under the ejector star? One flake of powder can bind things up!

Go to the Hodgdon website and you can get the data there for Universal. Just compare 44mag and 44 special data and you will get what you need.

Got to admit this peaked my curiosity so i pulled my 24-3 out and gave it a try. I found that factory 44 mag would not chamber but my heavy 250 Keith 44 mag handloads with a heavy crimp would, though the OAL was longer than the cylinder . Have to be more careful with lighter 44 mag reloads from...

If you go to gun parts corp the had the parts in stock to assemble a sight, dont know if they still do. you just buy the individual parts and assemble the sight.

Took a look on Amazon at the product, i would be careful using it on holsters as it states it softens leather.

Outback Trading Company Deer Hunter vest

Thanks for the replies , if this thing is right i wont even be on paper at 25 yards, guess i'll have to wait and see.

Has anyone used a laser bore sighter on there Smith revolvers? I am trying to determine if i need a lower front sight on a 629 mountain gun. Cant get to a range right now but using a bore sighter ,the kind with the rod that goes in the barrel, it shows my point of impact will be very low even...

Anyone have a source for data to load the Rimrock 200 grain 44 wadcutters in both Special and magnum? Trying to duplicate the Buffalo Bore loads for defense as well as target loads. Powders i have are Bullseye, Unique, and 2400. Thanx!!! Will be using in a 24 3 inch and a 629 PC 2 5/8 inch.

New leather for walkin in the woods with my 629PC. Horsehide leather with a 12 round pouch, 6 on loops 6 on strip mix or match. Thanx for lookin!

Thanks, Ill try that!

Yup same model. shooting at 25 yards. Thanx!

Scored a pair of the 629-5 Performance Center 44 mag revolvers awhile back with the 2 5/8" slab sided barrel. Finally decided to start shooting one of them and it hits waaay low even with the rear sight maxed out, Is this a common problem? Does anyone know the height of the rear blade used in...

try Rimrock Bullets or Matts Bullets Also Western Bullet Company

ive used some of their other scopes and they do the job. They are not a high end scope but they work. Also check this linkhttps://montanavintagearms.com/product/winchester-scopes/winchester-scope-no1-mount/

Does anyone have load data for this bullet using Alliant 2400 or a link to the Brian Pierce article from December 2006 in Handloader magazine. Thanx!!!

I remember way back in 1988 when a large Police Dept.for which i was a member switched to the Beretta 92 FS, a fine semi auto. Prior to this we were armed with the S&W Mod 64 4" heavy barrel a fine revolver. After the first few months the actual shooting results started coming in which led to...

Leadhead Bullets, as true to original as ive found w/o casting your own.

Just get a Lewis Lead Remover for Brownells and alll that lead is gone, i use in the cylinders , forcing cone and barrels and removes all lead.

i would stay away from the chrome tanned leather as it will sause the gun to rust if left in the holster for extended periods. Use a good quality veg tanned leather 7-8 oz. will work well and use Fiebings pro dye.