Search results

hard to say, most times you have to purchase and try to see if it's going to clear, unless you can verify with the tech measurements provided on UTG's website. I have the Nikon P223 3x small scope and have it on a UTG QD mount sitting on top of a 1/2" riser so it will clear the rear MBUS. The...

If the crimp is good, then your fine doing bulk storage. I store mine in the black plastic Winchester ammo cans that you can stack...600 rounds in each. Using the 100 round plastic boxes tends to take up too much space. There is no wrong answer, it just comes down to how much area in a room are...

I don't recall seeing any arrows pointing "this end forward" on the mount. If it holds your scope on your rifle at the proper eye relief, then it's on the correct way. Now, if this were a tapered mount that had a built in MOA adjustment, then you would be correct. There would be a front and a...

This is my setup. I use a UTG QD mount with a riser which works perfect with the P-223 scope. Since I took the picture, I've moved the mount forward about an inch. The front bolt is in the most forward slot in the upper. Eye relief is just right as I shoot with the stock fully extended.

9mm barrel in a 40 slide shoots just fine....9mm barrel in a 9mm slide marked as a 40 shoots just fine. Why go thought the trouble of returning it...just enjoy shooting it.

I've just started looking over the Talons as well, thanks to these topic's on this site. The comments above match up with the recommendation on Talon's website....Rubber for CCW and Granulate for matches. I'm thinking of getting the rubber for my shield and the granulate for my M&P-22....when I...

I've got one of the Drago bags as well in Black. Very well made bag for sure. The two outer pockets you should be able to let out the strap and the other cord and you should be able to get I believe 5 30rd Pmag's in each pocket up on edge. You can fit a multitude of stuff into that bag.

You will notice that in the first picture with just the upper that the fore grip is on correct, but in the second it isn't. I'd say he realized his error and corrected it once he picked it up and attempted to hold it....but that was after pictures had been taken. Sadly with computers, you lost...

I've been very pleased with the "Lodge Outfitters" double rifle case. It's a 42" case with adjustable hook and look straps for each weapon and a padded divider. Perfect for the MOE mid and the 10/22. Lodge Outfitters Double Rifle Case | DICK'S Sporting Goods I also use a range bag from Midway...

Quantico Tactical has multi-pack's listed....5 for $50 and 10 for $90, or you can get singles for $12.30 each...or a case of 100 for $850. Hmmm sounds like cheap stocking stuffer's for next year for a LOT of friends. Windowless PMAGs 5 for $50!

Being left eye dominate, and right handed....if I'm shooting right handed my upper body is in the weaver stance, but my lower body is more like the fighting stance. If I'm shooting left handed, I'm in more of a full on fighting stance. May not be text book, but it puts the holes where I want...

I carry a Leatherman WAVE daily and am really happy with it, so when I saw the MUT, I picked one up. I haven't used it as much, but still am very happy with what it has. I've never used the file on any of the Letherman's I've owned, so I don't miss it. Matt

The slot in the pin has nothing to do with the gas port. There is another hole in the tube that should line up with another hole in the block when the tube is pinned to the block. I'm guessing the block uses set screws to lock it in place. There is a hole in the barrel and the block that have to...

I've been lucky I guess when it comes to picking up .22 ammo. I've got a local Dicks that seems to always have something in stock, be it the 40ct Federal, 500ct golden's or 1400ct bucket o bullets. The folks selling at the gun show seem to have a lot as well, although they are at insane $$$$. A...

I just picked up a "Lodge Outfitters" double rifle soft case for $80. It has a pad separating each weapon which are secured with three straps each. The thing I like best, the straps can be moved to suite the weapon you are putting in the case. It seems to work very well for my M&P-15 and 10/22

I have the block that you put in the vice, then use two pins to lock the upper to it. It worked fine for me. You just want to ensure that you keep the wrench square and pressed in tight into the nut so you don't damage the nut or bend a pin on the wrench. No lock-tite on mine but it looked like...

They are running the buckets in the weekly add for my local Dicks. They tend to hold a certain amount for each day so they have some for the whole week. They have had a pretty regular supply, it still doesn't last the day, but they are getting it in at least.

Picked up a couple Rem 1400 ct Buckets at dicks today for 62.99.

I went to a local gun show on Friday and saw lots of 22LR...problem was, it was still crazy stupid high priced. Couple tables had the Rem 525 bricks, and I thought...wow, I got mine @ Dicks for $24.95 last month, and you are asking $65....good luck with that. I just shook my head at the guy and...

I happened into getting four 500 rnd bricks @ Dicks the other weekend @ $24.99 each over two days. I guess they got a bunch in and only put out so much each day on Sat, Sun, then into the week to spread it out. They are opening a Gander Mountain in the fall this year in town so I hope that...