Search results

I got a reply back from S&W today. Here is their reply:

Yes it is very rough along that edge.

Was cleaning my M&P Pro 9 today and noticed some ugly looking wear on the front edge of the barrel hood and where it interfaces on the slide. Had the gun for about a year, it currently has 1857 rounds through it. I have been using brian enos slide glide regular and heavy as my lube. I...

This worked! Thanks for the help!

Top is the SDM sight bottom is the stock sight I removed from the gun Problem is that since the rear has to go in first due to the length of the SDM sight I can't tilt it in at an angle enough for the front of the dovetail to clear the roll pin. Here is the gun:

No I haven't because the documentation that came with it said to be installed by a competent gunsmith only. I figured if I called they would just say the same thing. It was a pain in the *** removing the stock sight because the spring that holds it in is hard to compress. I had to use a...

So I was able to remove the stock ramped front sight fine. Problem is installing my new SDM fiber optic front sight. Any tips? Found nothing on YouTube and searching here.

Problem fixed! Posted in the 642 Facebook group. Someone asked if I had use degreaser , which I did. He suggested some lube shot up behind the trigger. Gave it a quick squirt of CLP, seems to have fixed the problem. :D

I bought in April 2013 brand new. Fired it for only the second time in an idpa match last week (about 50 rnds). Worked fine before that. It was working fine before I cleaned it today because I dry fired it for about 5 min problem free.

All I did was clean and oil it. I also removed the grips too. I didn't touch the other screws or remove the side plate.

I removed the cylinder and yoke to clean my 642 today. Now the trigger sticks and will not reset. Here is a video of the malfunction. Did I break my revolver!? S&W 642 Malfunction - YouTube

I use the safariland 7378-819-411 for my 5 in m&p pro. The barrel does not protrude.