M&P15 picture thread

[oneyeopn]

Here is my New M&P Sport with the Ultradot Pan-A-V and my original black rifle a 1936 BRNO VZ24 (czeck made Mauser 98)

https://skydrive.live.com/redir.aspx...220&parid=root



I love them both!!

[Jayhawkhuntclub]

Oneyeopn: Good looking pair of irons you have there!

I expect a full report on that Ultradot after you give it a run through it's paces. For that matter, I wouldn't mind hearing how the Sport treats you too.

[oneyeopn]

Originally Posted by Jayhawkhuntclub

Oneyeopn: Good looking pair of irons you have there!

I expect a full report on that Ultradot after you give it a run through it's paces. For that matter, I wouldn't mind hearing how the Sport treats you too.

JHHC: as soon as we get the weather to warm up at least into the 50's I will spend an afternoon at our private range, with targets up, my shooting table and chair set up, either the Lead Sled or the NXT shooting rest and a spotting scope. I really like the way the Ultradot reticle looks going through the sites and I put 5 rounds down range yesterday at about 150 yards and was banging on the gong after the first shot. but I will give a complete range report with pics.

[Capt Crunch]

Well I think I'm pretty much finished here with my Sport so here's my gun porn to add to the group. The only other thing I may do is a muzzle break but that I have to have added and pinned by a gunsmith (Thanks NYS)so not sure when or if I'll have it done.







and here is my stock, pinned in place as per NYS law...fitted it to my size first as I won't be moving it after this. I had to buy a new buffer tube too as the one I had was commercial and really long (another NYS thing I believe).

[loveat1night]

Originally Posted by Capt Crunch

and here is my stock, pinned in place as per NYS law...fitted it to my size first as I won't be moving it after this. I had to buy a new buffer tube too as the one I had was commercial and really long (another NYS thing I believe).

Where did you buy the tube and the stock?
I'm in the same scenario in MA and looking for the replacement as the tube too long

[Mustang5L5]

Originally Posted by TangoFoxtrot

How is that angled foward grip working for you?

I like it a lot. I'm comfortable with it and like how it feels. Been playing with its location on the rail and I prefer it close to the magazine well even though everyone who shoots has told me to push it to the end. I might do what I prefer though.

My buddy, who is a marine, hates the thing.


Sent from my iPhone 4S using Tapatalk

[TangoFoxtrot]

Originally Posted by Mustang5L5

I like it a lot. I'm comfortable with it and like how it feels. Been playing with its location on the rail and I prefer it close to the magazine well even though everyone who shoots has told me to push it to the end. I might do what I prefer though.

My buddy, who is a marine, hates the thing.


Sent from my iPhone 4S using Tapatalk

Yeah I'm still kicking the idea around. If I see someone on the range with one I'm gonna ask them if I could check it out. The VFG just doesn't cut it for me. Maybe just old dog new trick thing.

[crracer_712]

[oneyeopn]

I have had my sport for a little over three weeks and here are the transformations she has already gone through, and once I get my Scope riser I think of one more that is coming!!! Ok here is a day later and another configuration:: Just playing with my toy, before we go to the range..

[TangoFoxtrot]

Nice setup how heavy is that rig?

[sixminusr]

Shoot it every chance I get. M&P 15T Love the Optics

IMG_0218.jpg

[ALA G8R]

Started out as a M&P-15a.
I added a Daniel Defense Omega 7 FF rail.
Magpul CTR
Magpul Enhanced trigger guard
EoTech EXPS3-0
EoTech G23 Magnifier

[max4gooser]

My turn. This began life as a stock M&P15A. It is a work in progress



To date I have added:
Troy Battle Axe stock
Troy MRF-CX 12 Battle Rail
Troy Battery Assist Lever
Aimpoint PRO
Hogue AR Pistol
Magpul MOE Trigger Guard
VTAC sling

Sorry for the ****** cellphone picture.

I still need some Troy rail panels, a Troy modular vertical grip, and Stream light TLR1s light.

[papershooter]

Hi all, new to the site as well as this ar15 wholesome goodness.

m&p15t
magpul ctr buttstock
hogue grip
magpul BAD lever
Magpul mbuis
Sig Sauer CP1 prismatic scope 3x

Ill take more photos soon

[teamwoody]

Added:
VLTOR EMOD Stock
Timney Skeleton Trigger
Crayon Mod

[GeauxHunting]

Originally Posted by TangoFoxtrot

Nice setup how heavy is that rig?

I'm pretty sure it's 8lbs 3oz.

Not too bad, but I need to get a new sling for when I do carry it for long periods of time.

[wihunter]

I think I'm done at least until I find the next must have.

Magpul furniture

MI gas block and sights

PRI Combat latch

Blackhawk sling mount

Rainier Thunder Bolt Chrome BCG

Spikes ST-T2 buffer and Sprinco blue spring

[countryfirst]

Does the investment ever end with these? Never. And that's great.

Anything different/additional I should do to my 15OR? Currently considering a switch-over to all Magpul. What do you think?

M&P 9
M&P 9c
M&P 22
M&P 15OR
M&P 15-22

[PapaRay]

Bought an M&P sport last month. I am looking to upgrade the optics. Any suggestions?

[jokersmiles]

Here's my m&p 15x, she's a great starting block.

2012-03-09_01-52-22_825-1.jpg

[fx21basser]

Heres mine

[PunisherBane]

[IcedDog]

A Clone Trooper of the Republic with an M&P15(OR?)...if only S&W could start manufacturing light sabers

[oneyeopn]

I took off the 4-16x40 scope and put on a 3-9x32WA scope. I really didnt have enough gun for the big scope although it works nice it made it a little heavy. dropped over 1 lb in weight. I have run this scope on my 17hmr and it works very well plus has brighter optics and no battery.DSCF3750a.jpgDSCF3743a.jpg

[hardluk1]

My sport with a used RRA freefloat tube , RRA 28 buck gas block and scope mount and a 10 round ar stoner mag for range time. Scope is a 2.5-10 bushnell made in japan I had on a shelf.

[Danny2tek]

Here's mine ............





When I still had the stock handguard.....

[Mustang5L5]

Not a pic of my rifle, but one of its ability.

35 yards, iron sights, 2 hits out of 4 shots




Sent from my iPhone 4S using Tapatalk

[Mots0311]

Originally Posted by Mustang5L5

Not a pic of my rifle, but one of its ability.

35 yards, iron sights, 2 hits out of 4 shots




Sent from my iPhone 4S using Tapatalk

Well done man! I gotta try that.

[Grjfer]

Ok here my S&W M&P15. Still bone stock. Been stocking up on ammo & mags.

[capo11]

[IMG][/IMG]


M&P 15FT

[oneyeopn]

I have found my 1 minute of Prairie Dog...my next changes will be to go to a 4-24x42 scope and to put a low profile gas block with rail for a folding front sight and a 5 1/2" muzzle brake!!!

DSCF3777.jpg DSCF3769.jpg

DSCF3774.jpg DSCF3776.jpg

[oneyeopn]

Originally Posted by oneyeopn

I have found my 1 minute of Prairie Dog...my next changes will be to go to a 4-24x42 scope and to put a low profile gas block with rail for a folding front sight and a 5 1/2" muzzle brake!!!

Attachment 69683 Attachment 69684

Attachment 69685 Attachment 69686

Next reiteration!!DSCF3786a.jpg

DSCF3787a.jpg DSCF3790a.jpg

DSCF3791a.jpg

[oneyeopn]

This is the latest rendition of my Sport, it changes whenever I can afford it to....LOL

https://skydrive.live.com/redir.aspx...BDo4_fD2ET3P6Q

[bifistik]

out with the old and in with the new 0 round count tactical. im still waiting on the eotech magnifier and surefire break and light. its set up just like my old one but updated gear. ordered my surefire mini too 6-8 months to go

[9sec93lx]

Here's my M&P 15 Sport that I purchased new in October 2011 and my S&W 3rd generation pistol model 411 in .40 S&W that I've owned since 1999.

[oneyeopn]

Here is how my Sport looks today, still looking for the just right feel!!:
DSCF3926a.jpg

DSCF3927a.jpg

DSCF3930a.jpg

DSCF3933a.jpg

DSCF3938a.jpg

Sniper PEPR scope mount, FAA Corp 7"long 1/2" riser, Black Rifle Tactical Covers, Omega Tactical Quad Rail, FAA Corp Bipod Mount, UTG Deluxe 8" bipod, Jason Jones fluted thread protector, G27 Pistolgrip, FAA Corp charging handle latch, Mako Magwell Grip, Matech folding rear sight, AXC folding front sight, AXC railed gas block, 8-32x42 Optronics Horizon Buckridge Scope, and underneath all of that my Sport!!

[maninblak]

sorry for the feet

[Labatt911]

I am a police officer and carry mine on duty with me so I did some additions but kept it more practical. I added a section of rail to the bottom of the stock handguard and added...

SureFire M910A vertical foregrip/light with red navigation lights
EoTech 511 HWS
EoTech second generation 3X Magnifier with FTS mount
BCM Gunfighter charging handle with medium latch
Magpul MOE collapsible stock
Magpul Ambidextrous Sling Attachment plate
Magpul MS3 Sling
Magpul aluminum trigger guard

Also has the S&W flip up rear sight

[WIKD]

Right after sighting in the Primary Arms compact scope.

[oneyeopn]

Just a few minor changes...DSCF3941a.jpg

DSCF3942a.jpgDSCF3947a.jpg

DSCF3946a.jpg

Ladders, BAD lever, new muzzlebrake, remounted bipod for more handroom

p.s. have a Bushnell (supposedly) 6-24x50 Dawn to Dusk scope coming for it.

[turbo2]

Originally Posted by oneyeopn

Just a few minor changes...Attachment 73703

Attachment 73704Attachment 73705

Attachment 73706

Ladders, BAD lever, new muzzlebrake, remounted bipod for more handroom

p.s. have a Bushnell (supposedly) 6-24x50 Dawn to Dusk scope coming for it.

What scope is that on there now in the picture? Why are you changing? What distances do you shoot with it? I am trying to learn about scopes and the different magnifications before I make my purchase

[Splittiebus66]

M&P

[oneyeopn]

Originally Posted by turbo2

What scope is that on there now in the picture? Why are you changing? What distances do you shoot with it? I am trying to learn about scopes and the different magnifications before I make my purchase

Turbo2...thats a 8-32x42 Horizon Buckridge. I shoot over 200 yards mostly. I am changing for a larger field of view plus I dont normally take it to 32 power normally run 16 to about 24-26. So the new scope will allow me a larger FOV plus it will cover my magnification range.

[XxLaloCuraxX]

Here's my OR after a few add-ons.

[crracer_712]

[speeddemmon10]

I plan on adding a magpul moe fde stock. New charging handle, barrel and bcg.

fde ar 15.jpg

[oneyeopn]

Originally Posted by speeddemmon10

I plan on adding a magpul moe fde stock. New charging handle, barrel and bcg.

Attachment 73966

If you decide to sell the barrel send me a message, Please.

[Splittiebus66]

Originally Posted by oneyeopn

If you decide to sell the barrel send me a message, Please.

I'm wondering what you'd replace the barrel with??? It's the best part of that weapon

[CENTURION24]

Kind of a progression


Until I buy my Eotech Magnifier, this is my sport...

[oneyeopn]

Centurion, I really like that butt stock. Am seriously thinking I might have to get one. After I replace my upper with the Marine Corps emblems on the new one. Just so happens to come with a FA and dustcover....Dont want anyone to think I believe they are a necessity. this upper was a contract overrun and I got it cheap, really cheap!!