- Joined
- Mar 24, 2017
- Messages
- 1
- Reaction score
- 0
I recently bought a Smith and Wesson sd9ve and am curious what companies website I could go to in order to purchase custom aftermarket parts such as slides and barrels and whatnot.
sd9ve upgrades.
- Thread starter Jasonberlingbrown
- Start date
Register to hide this ad
The SD does not have the plethora of aftermarket parts that the M&Ps do, and some of the SD parts are "factory installed only" which includes little parts like small springs which you can't buy anywhere.
If you want to play mix 'n match, I'd start with an M&P.
If you try to do a dual caliber setup with an SD, for example, the first thing you will find is that the magazines are different widths and do not interchange between calibers.
http://smith-wessonforum.com/smith-.../514990-sd9ve-slide-stop-upgrade-problem.html
If you want to play mix 'n match, I'd start with an M&P.
If you try to do a dual caliber setup with an SD, for example, the first thing you will find is that the magazines are different widths and do not interchange between calibers.
http://smith-wessonforum.com/smith-.../514990-sd9ve-slide-stop-upgrade-problem.html
Last edited:
Disabled1
US Veteran
Ebay sells slides and barrels, as well as other misc. parts.
Upgrades consist of:
Am I missing anything?
I don't think there is a threaded barrel or a custom barrel for the SD, such as those made by Lone Wolf, Storm Lake, Apex, etc., for M&Ps.
As noted by others in this thread, aftermarket parts for the SD-series are few, compared to Glocks and M&Ps!
- Apex Spring Kit and Trigger
- Steel recoil spring assembly (read the thread on this before doing it!)
- Improved (wider) takedown plate from Galloway or NDZ
- A wide array of sights (i.e., sights that fit the M&P also fit the SD-series)
- Talon grip panels
- Two slides available -- black or silver-colored stainless steel
Am I missing anything?
I don't think there is a threaded barrel or a custom barrel for the SD, such as those made by Lone Wolf, Storm Lake, Apex, etc., for M&Ps.
As noted by others in this thread, aftermarket parts for the SD-series are few, compared to Glocks and M&Ps!
Last edited:
GRU_ 7_ mech
Member
Also......Polish feed ramp and internals as desired,
TriumphMan
Member
You can also get from Amazon, DNZ and I believe another company, but can't think of name, the slide's rear plate that's lazer etched with many different sayings, logos, animals, and custom words for less than $20.
It's also made of alloy metal instead of factory plastic, too.
You can also do the M&P TruGlo optic sights or go with the trinimum for a glow in dark sight.
It's also made of alloy metal instead of factory plastic, too.
You can also do the M&P TruGlo optic sights or go with the trinimum for a glow in dark sight.
