3913 spring kit installation

[baird]

OK, I asked this same question regarding K frames and now I'm intending to move on to my 3913 and 6904 to try and improve their triggers a bit. I've installed kits on my J frames and K frames with good success. I've even done one on my Ruger Speed Six that helped considerably. Unfortunately now I've become emboldened. This could be bad.

Does anyone have or know where I can get a video or book that shows how to install a Wolff spring kit or similar? From reading about others who have done them it seems to make a positive difference and that sounds good to me!

Thanks for helping feed the sickness!

 

[Tarheel97]

Here's a link with other links and videos. The step by step instructions referred to at the "other" forum are very helpful. It's not for a 3913 specifically but it should help.

http://smith-wessonforum.com/smith-...ols/194072-breaking-down-3rd-gen-dummies.html

 

[markush]

Here's a link with other links and videos. The step by step instructions referred to at the "other" forum are very helpful. It's not for a 3913 specifically but it should help.

http://smith-wessonforum.com/smith-...ols/194072-breaking-down-3rd-gen-dummies.html

Follow that link and in post #8 are additional links to an excellent series of videos on youtube. It's much easier for me to watch someone do it then have to follow a write up.

 

[baird]

Many thanks for the information. Now I have something to do in my spare time!