5904 New to me :)
- Thread starter Halfnutz
- Start date
No box :/
Register to hide this ad
Very nice pick up, especially with the extra magazines. Edit the picture and post up some more.
Try this again.
Guessing it is an early model. I have not found a "Serial number/ date of manufacture" thread yet. I'll ask when I call about the grips. The mag followers are black and they still hold 15 rounds. I'll be taking them apart to see if they have been modified. I thought the 15 rounders were orange.
Guessing it is an early model. I have not found a "Serial number/ date of manufacture" thread yet. I'll ask when I call about the grips. The mag followers are black and they still hold 15 rounds. I'll be taking them apart to see if they have been modified. I thought the 15 rounders were orange.
Attachments
Grip recall........
SMITH & WESSON
MODEL 3904, 3906, 3913, 3913LS, 3914, 3914LS,
1006, 1066,
4506, 4516, 4516-1,
5903, 5904, 5906, 5946,
6904, 6906 & 6946, PISTOLS
RECALL: Smith & Wesson has shipped over 300,000 Third generation Pistols. We have had a very small number or reports where a dropped pistol resulted in a broken grip resulting in a failure to fire by releasing mainspring tension. Resultant testing and review have shown that a pistol dropped at a specific angle can cause a fracture of the grip.
As a result of these occurrences and our testing, we have made a change in the grip material to a thermoplastic alloy of increased durability. This new material, which is now being used on all current production models, can be identified by a dimple on the bottom of the grip, next to the large opening. Additionally, the blue product box has a green dot sticker on the label end.
We believe it unlikely that you will experience any problem with your original grips. However, in order to safeguard our customers from the possibility of such a malfunction, we will make available, free of charge, an easily installed replacement grip. Please inspect your pistol and if you have a model listed below that does not have a small dimple next to the large opening, please write us including your model and serial number or call 800-338-2466. If you prefer, you can send your pistol to a Smith & Wesson Warranty Station where we will replace the grip for you.
Models Affected:
3904, 3906, 3913, 3913LS, 3914, 3914LS, 1006, 1066, 4506, 4516, 4516-1, 5903, 5904, 5906, 5946, 6904, 6906 & 6946
Smith & Wesson's development process is a continuing one. We are constantly striving both to develop new products and improve existing products. We are committed to building the safest, most reliable, finest performing firearms possible.
SMITH & WESSON
MODEL 3904, 3906, 3913, 3913LS, 3914, 3914LS,
1006, 1066,
4506, 4516, 4516-1,
5903, 5904, 5906, 5946,
6904, 6906 & 6946, PISTOLS
RECALL: Smith & Wesson has shipped over 300,000 Third generation Pistols. We have had a very small number or reports where a dropped pistol resulted in a broken grip resulting in a failure to fire by releasing mainspring tension. Resultant testing and review have shown that a pistol dropped at a specific angle can cause a fracture of the grip.
As a result of these occurrences and our testing, we have made a change in the grip material to a thermoplastic alloy of increased durability. This new material, which is now being used on all current production models, can be identified by a dimple on the bottom of the grip, next to the large opening. Additionally, the blue product box has a green dot sticker on the label end.
We believe it unlikely that you will experience any problem with your original grips. However, in order to safeguard our customers from the possibility of such a malfunction, we will make available, free of charge, an easily installed replacement grip. Please inspect your pistol and if you have a model listed below that does not have a small dimple next to the large opening, please write us including your model and serial number or call 800-338-2466. If you prefer, you can send your pistol to a Smith & Wesson Warranty Station where we will replace the grip for you.
Models Affected:
3904, 3906, 3913, 3913LS, 3914, 3914LS, 1006, 1066, 4506, 4516, 4516-1, 5903, 5904, 5906, 5946, 6904, 6906 & 6946
Smith & Wesson's development process is a continuing one. We are constantly striving both to develop new products and improve existing products. We are committed to building the safest, most reliable, finest performing firearms possible.
gmiller0737
Member
They Sent Replacement Grips For My 3913 it took a month or so but They Did make good on The Recall
Sent from my iPhone using Tapatalk
Got tired of holding my screen upside down, so here you go:
Since you showed me yours, I'll show you mine:
Since you showed me yours, I'll show you mine:
One of my favorite double-stack nines. Enjoy!
Jerry
Jerry
Fazer386
Member
Fantastic find! The 5904 was my 2nd gun purchase. I paired it with a 4" DW .357, one for HD and the other for carry. I shot my first USPSA match with the 5904. Straight grips are available if you like flat MSH. FYI.
medic15al
Member
I've wanted a 5904 since 1992 when I started working armed security PT. Saw and handled one and loved it! Just couldn't afford it at the time. Now I have just purchased one with Novaks and round trigger guard. Always Liked the blue/black finish over the stainless 5903 but would have gotten one then as well.
I cannot abide those winged adjustable sights and dislike the heavy all steel xx05 and xx06 models. I might be a bit picky!
I cannot abide those winged adjustable sights and dislike the heavy all steel xx05 and xx06 models. I might be a bit picky!
Midway USA has 5900 series grips in stock, I would place an order ASAP. Nice pistol !
TNZ71
Member
Soooorryyy
