940 questions ! Help...

[HEADKNOCKER]

Great Articles on the "HOT ROD" 9x23
I'm going to edit the post that has 9x23 in it..
Now I have another use for old .223 brass

Gary/Hk

 

[Ultima-Ratio]

Link please?

Last I looked WWW still makes white box 9x23, clocked from a 1911 and an EAA conversion both exceeded 1500fps with 125s....The odd thing about these is that recoil is minimal if compared to your favorite .357 Mag revolver with equal level ammunition.

 

[Noah Zark]

My 940-0 used to stick cases something fierce. The only type of case that DIDN'T stick was nickel.

Then I used Headknocker's chamber hone set according to instructions and it was END OF PROBLEM, PERIOD. No extraction issues whatsoever now.

Before honing, the chamber walls looked like a phonograph record. Now, they are smooth and shiny-bright. Nothing for the cases to stick to anymore.

The only 9mm cases that I havent tried are the Blazer aluminum, only because I've fired the last of what I had, and have no intention of getting any more.

Noah

 

[HEADKNOCKER]

Anybody Who Wants to Use the Brownell's Flex-Hones feel free to contact me, I have Medium & Fine & the Special Oil required for them..
These will work in 38/357 9mm/38Super etc .355-.357..
Glad They worked out for you Noah..
I bet your cylinder looked something like this before the Honeing..
Gary/Hk

 

[HEADKNOCKER]

Ed333 I'll be sending those Hones Your Way ASAP
Hope they help your 940 out..
Enjoy!!
Gary/Hk

 

[HEADKNOCKER]

I finaly got around to sending those Cylinder Hones out to Ed333 & they should be in his hand by this Saturday or Monday.. Dropped them in the mail this Morning, Only cost $1.25 to ship.
Anyone else that wants to use the Mid & Fine Cylinder hones for 38/357/9mm/380 Give me an email @ [email protected]
My Small Way of Giving Back..
Gary