A couple of things I learned on ebay

[jrm53]

I had been wanting an old Lyman #39 hand book and a Lyman mould, they were available on Ebay but went for more than I thought they were worth. Ordered a new Lyman 225438 from Mid south shooters for 51.15 its b.o. but they bring more than that on ebay. The manual I got from Amazon for 15.00 they went for twiced that or more on ebay. While I was on the web page of Mid south I see that they had a Lee special order double cavity 22 mold that casts a 55 grain R.N. gas check for 18.08 or something close to that I ordered one today the downside is 8-9 month delivery. In my opinion you should get the molds you think you might want NOW as they will only get scarcer and scarcer. I think someday we will only have what we can load ourselves. The #39 manual shows a lot of cast rifle loads. You can get a reprint from www.cornellpubs.com for 15.00.

 

[jrm53]

I had been wanting an old Lyman #39 hand book and a Lyman mould, they were available on Ebay but went for more than I thought they were worth. Ordered a new Lyman 225438 from Mid south shooters for 51.15 its b.o. but they bring more than that on ebay. The manual I got from Amazon for 15.00 they went for twiced that or more on ebay. While I was on the web page of Mid south I see that they had a Lee special order double cavity 22 mold that casts a 55 grain R.N. gas check for 18.08 or something close to that I ordered one today the downside is 8-9 month delivery. In my opinion you should get the molds you think you might want NOW as they will only get scarcer and scarcer. I think someday we will only have what we can load ourselves. The #39 manual shows a lot of cast rifle loads. You can get a reprint from www.cornellpubs.com for 15.00.

 

[flash60601]

I'm not sure I would be too spooked by that delivery disclaimer.

I ordered some parts for my press last week, and they arrrived today.

Flash