haris1
SWCA Member
The Ultimate carry pistol in a commander sized package.3.25lb trigger pull. Feels so silky smooth that i thought it was 2.5!
Lots of extras enhancing an already nice pistol. The $1495 that clark charges does not include this pistols stippled frontstrap, the sights, or the slide finish and frame finish.This is about 2600 to duplicate today!! Was asking $1900 shipped to your ffl.Now $1650 before it goes to auction Wonderful smooth trigger about 3 1/4 pounds.
From the Clark Custom Guns web site:
Trigger job w/aluminum match trigger
CLARK Commander hammer
Ed Brown tactical extended thumb safety
Low mounted Novak sights.
Reliability package
Beveled Mag Well
Lowered ejection port
Ed Brown Beavertail grip safety
Clark Big Bushing and Reverse Plug
MeltdownTM - The "edgeless" dehorn job!
"The Clark Meltdown ™ package is the definition of a smooth, user friendly carry gun...So nice to touch!"
Custom Combat Handguns Magazine
"If the Clark Meltdown ™ were a movie, they’d call it ‘Revenge of the Belt Sander’."
American Handgunner Magazine
"....the Meltdown ™ has every corner contoured and blended until what’s left...is a pistol that feels like a well-used bar of soap."
Guns Magazine
"The most clever custom carry conversion of a 1911 pistol we’ve seen in a long time has just been introduced by Clark Custom Guns."
American Handgunner Magazine
Next up - I bought this on the forum and later bought a performance center CORE thats ported.. I swapped the complete lower of the new PC gun with the upper of the Core that I bought on the forum. I am selling the complete upper with RMR thats
matter to my brand new PC M and P lower that has the trigger stop and an enhanced trigger pull
Since I am retaining the original lower, the stipple work and apex trigger job is on the m+p that I am keeping
From the original forum thread in Italics
M&P CORE 9mm 4.25" Barrel
This is a beautiful pistol with lots of upgrades:
Polish barrel throat and mating/sliding surfaces ($50 Value)
Match Grade Barrel ($100 Value)
Custom Stipple Work ($90 Value) (not included since its now on a perf center lower)
Full Apex Trigger Job w/Billet Trigger - 3.5lb - 4lb pull ($200 Value)(not included since its now on a perf center lower)
Includes Trijicon RM04 ($490 value)
Includes two 17 Round Mags
Original Box, Paperwork, Fired Shell, Extra Backstraps, etc...
I've put just over 200 rounds through this pistol (only 34 since the trigger/polish job).
The trigger is an Apex forward sear trigger kit with the billet aluminum trigger. It was professionally installed and all mating and sliding surfaces were mirror polished. It also has the Apex reset assist mechanism installed (RAM). This greatly helps the reset of the trigger become something you can feel.
I need to sell so that I can purchase an IDPA compatible pistol for competition. This one has been "too modified" to compete, plus they don't allow the red dot.
Total value of this pistol is over $1,400. I'm asking for $1,000.
I paid $1,000 will sell the pistol for $900 shipped in the serialized original box with all docs,papers. This is the complete upper with the RMR
and its on a brand new Performance Center M and P lower product code 10097
Lots of extras enhancing an already nice pistol. The $1495 that clark charges does not include this pistols stippled frontstrap, the sights, or the slide finish and frame finish.This is about 2600 to duplicate today!! Was asking $1900 shipped to your ffl.Now $1650 before it goes to auction Wonderful smooth trigger about 3 1/4 pounds.
From the Clark Custom Guns web site:
Trigger job w/aluminum match trigger
CLARK Commander hammer
Ed Brown tactical extended thumb safety
Low mounted Novak sights.
Reliability package
Beveled Mag Well
Lowered ejection port
Ed Brown Beavertail grip safety
Clark Big Bushing and Reverse Plug
MeltdownTM - The "edgeless" dehorn job!
"The Clark Meltdown ™ package is the definition of a smooth, user friendly carry gun...So nice to touch!"
Custom Combat Handguns Magazine
"If the Clark Meltdown ™ were a movie, they’d call it ‘Revenge of the Belt Sander’."
American Handgunner Magazine
"....the Meltdown ™ has every corner contoured and blended until what’s left...is a pistol that feels like a well-used bar of soap."
Guns Magazine
"The most clever custom carry conversion of a 1911 pistol we’ve seen in a long time has just been introduced by Clark Custom Guns."
American Handgunner Magazine
Next up - I bought this on the forum and later bought a performance center CORE thats ported.. I swapped the complete lower of the new PC gun with the upper of the Core that I bought on the forum. I am selling the complete upper with RMR thats
matter to my brand new PC M and P lower that has the trigger stop and an enhanced trigger pull
Since I am retaining the original lower, the stipple work and apex trigger job is on the m+p that I am keeping
From the original forum thread in Italics
M&P CORE 9mm 4.25" Barrel
This is a beautiful pistol with lots of upgrades:
Polish barrel throat and mating/sliding surfaces ($50 Value)
Match Grade Barrel ($100 Value)
Custom Stipple Work ($90 Value) (not included since its now on a perf center lower)
Full Apex Trigger Job w/Billet Trigger - 3.5lb - 4lb pull ($200 Value)(not included since its now on a perf center lower)
Includes Trijicon RM04 ($490 value)
Includes two 17 Round Mags
Original Box, Paperwork, Fired Shell, Extra Backstraps, etc...
I've put just over 200 rounds through this pistol (only 34 since the trigger/polish job).
The trigger is an Apex forward sear trigger kit with the billet aluminum trigger. It was professionally installed and all mating and sliding surfaces were mirror polished. It also has the Apex reset assist mechanism installed (RAM). This greatly helps the reset of the trigger become something you can feel.
I need to sell so that I can purchase an IDPA compatible pistol for competition. This one has been "too modified" to compete, plus they don't allow the red dot.
Total value of this pistol is over $1,400. I'm asking for $1,000.
I paid $1,000 will sell the pistol for $900 shipped in the serialized original box with all docs,papers. This is the complete upper with the RMR
and its on a brand new Performance Center M and P lower product code 10097
Last edited:
