Any Ideas for a Flash Hider or Fake Suppressor?

Register to hide this ad
Kayback said:
One of the shrouds that comes back over the barrel is a much nice look. IMHO.

KBK
Click to expand...

X 2

If you look in the 15-22 classified section Tacticool22 has these for sale. I got one from him and it looks great! Gives you the suppressed look but doesn't had any length to the barrel. It actually shortens it a little because you loose the length of the flash hider.
 
xXMilitaryMikeXx said:
Anyone have any ideas on a flash hider or fake suppressor that would look cool on my M&P 15-22? I am looking for a price range lower then $50.

I was already looking at this: .22LR FAKE SUPPRESSOR (FAKE SILENCER)THREADED 1/2x28 TPI - FOR RIFLE and this: Yankee Hill Machine Flash Hider Phantom 5C2 Aggressive 1/2-28 Thread
Click to expand...

Kineti-Tech is the only way to go..... in my humble opinion.

You can actually customize your own or purchase one listed, many styles to choose from

Take a look below..........

DSC01557.jpg

DSC01533.jpg
 
I'm also considering one of the shrouds from Tacticool for my non-threaded camo version. My main concern is how well the set screw actually keeps the shroud in place. Another concern is how badly does the set screw mar the finish? I don't plan to ever have it threaded so "the machining will eliminate the mark" doesn't fly for me.
 
Tacticool22 long barrel shroud. There are more pictures on the second to last page of the 15-22 pictures thread
img0654wc.jpg
 
I emailed Kinitech a question a while back in regards to a shroud for my Performance Center 15-22. Since the barrel is a little longer, I was trying to make sure they would still sit inside the rail. not even a response.
 
Jeffro57 said:
MFI Fake Suppressor / Barrel Shroud For S&W M&P15-22

A bit pricey, but I like "the corn-cob"!
Click to expand...

I installed the "corn cob" from MFI, and it is beautifully machined and finished. So nice I sent Michael Frost an email (CEO of MFI), although I had ordered thru rrages.com. It offers a very precise fit and mounts very securely. After ordering, I questioned if I should have spent that much money, considering everything else I've bought in the last couple months. (I started right after the election in November!) Anyway, I have no regrets, it really looks nice on the 15-22, especially after looking at the plain barrel and wishing I had the threaded one with flash hider.

Just my 2 cents (plus about another $120 ...) :)
 
Among other muzzle devices, I kinda like the looks of this one on my 15-22. It's called a slipover flash hider from DPMS. It doesn't lengthen the barrel much more than an ordinary flash hider but gives a bit of an illusion of an SBR. They are made of steel and a bit heavy at 8oz so I really don't use it much for more than a thread protector when a can isn't on it, but most of these fake cans are going to weight close to the same anyway. Midway sells them for $16.99





Uploaded with ImageShack.us
 
ChattanoogaPhil said:
Among other muzzle devices, I kinda like the looks of this one on my 15-22. It's called a slipover flash hider from DPMS. It doesn't lengthen the barrel much more than an ordinary flash hider but gives a bit of an illusion of an SBR. They are made of steel and a bit heavy at 8oz so I really don't use it much for more than a thread protector when a can isn't on it, but most of these fake cans are going to weight close to the same anyway. Midway sells them for $16.99





Uploaded with ImageShack.us
Click to expand...

Very similar, if not identical to the one I put on my Colt AR shorty many yrs ago. Mine is threaded.
 
The set screw leaves just a tiny ring where it "bites" into the barrel. If you ever remove the shroud (or fake supp if you turn it around) the ring can be sanded away and re-blued so you would never know it was there.
 
Jeffro57 said:
MFI Fake Suppressor / Barrel Shroud For S&W M&P15-22

A bit pricey, but I like "the corn-cob"!
Click to expand...

Glad I found this thread. I just picked up an M&P 15-22, Non-threaded barrel (all I could get at the time). I do not like the look of the barrel end of the non-threaded version.
I was thinking of either getting the barrel threaded by a local gunsmith and adding a flash hider or purchasing one of the fake suppressors listed here in this thread.
I'm likening the corn-cob look in the link and was wondering if this will add any length to the end of the barrel. I would like an extra 2" (story of my life:D) at the end just so it will fit better in my gun safe.

Dave
 
Maybe its just me but I wouldnt give 2 cents for anything fake. Yep, including boobs.
 
magnetik said:
I emailed Kinitech a question a while back in regards to a shroud for my Performance Center 15-22. Since the barrel is a little longer, I was trying to make sure they would still sit inside the rail. not even a response.
Click to expand...

Hello everyone I saw this post going and thought I would show some pics. My name is Eric I do work at Kineti-Tech. I would love to answer any questions or possible requests.

Magnetik ... I do apologize if we did not get back with you but we try to answer every email....phone calls are sometimes better to. However to answer your question as I type this we are making the needed back section for BULL barrel and people that have the adapters....we are currently making the adapters as well. I would suspect these will be online by Feb 12 -15 ish.

bullback.jpg

bullback2.jpg

bullback3.jpg
 
You must log in or register to reply here.

Similar threads

M
  • Locked
WTS S&W M&P15 Gas Piston Upper Complete NEW
Replies
0
Views
456
Mr6actual
M
Marcus von W.
  • Locked
60+ YEAR COLLECTION OF FIREARM PARTS, ACCESSORIES, MILITARIA, & ARTIFACTS
Replies
11
Views
3K
Marcus von W.
Marcus von W.
L
  • Locked
Flash Suppresor
Replies
0
Views
159
Luke Duke
L
F
pc'd bullets vs traditional/lubed bullet velocities
Replies
9
Views
1K
Lance Boyle
L
M
  • Locked
HK USP45, Sig P226R, Jericho, 91/30PU, Rem40-X, Sig556, Mausers
Replies
6
Views
3K
MG-70
M

Latest posts

Back
Top