Bolt hold open

Jayspec

Member
Joined
Feb 21, 2016
Messages
84
Reaction score
19
Location
London,England
Last weekend I had an extended range session during my time there I put about 400 rounds of mixed ammo down range through the m+p15. Eley sport cci ar tactical and mini mag. About 16 magazines in all I think my bolt hold open worked 3-4 times and if I remember right that was with the slower velocity eley sport. I have 3 magazines and all mags are affected. I have maybe 1500-2000 rounds through this gun and I would say that the bolt hold open has worked 90 percent of the time before the weekend. Any ideas of a fix anyone ? As I don't want to count rounds or hear that click of my firing pin going on an empty chamber
 
Last edited:
Register to hide this ad
My new sport had a simular problem with the 25 round mags

but not with any of my 10 round......

I had noticed a lot of sideways movement on the bolt hold open

"button" :(

My cure was to use two 2.5mm stainless steel washers,

these where adjusted to slip either side of the "button"

This seems to of cured my problem ;)







keith:D
 
Thanks. After reading the old posts I have taken a coil of my spring. I will try that first. Will let you know if it's fixed after the next range trip
 
Last edited:
Back
Top