Break in?

[ICUMPD]

I am sure this topic has been beaten to death. But I recently purchased a s&w AR-15 model 811036 is there anything I should do before shooting it or while shooting to break it in? I already purchased my extra P-mags So just curious about where to start.

 

[ICUMPD]

Also will it hurt to shoot .223 ammo through it since it is a 5.56 gun.

 

[cyphertext]

You should break it down and clean it before taking it out. Insure that it functions properly after you clean, lube, and re-assemble.

The .223 ammo is fine.

 

[BillyJack2012]

You should break it down and clean it before taking it out. Insure that it functions properly after you clean, lube, and re-assemble.

The .223 ammo is fine.

That's all I did. Then I dumped 2 full mags down range and giggled like a 10 year old girl.

 

[cyphertext]

...giggled like a 10 year old girl.

This is entirely optional!

 

[oneyeopn]

so which one is the 811036? the numbers make me have to do to much research to know that.

 

[cyphertext]

so which one is the 811036? the numbers make me have to do to much research to know that.

It's the Sport...

 

[gm272gs]

Send it to me. I'll break it in for ya.

In all seriousness. Clean it, shoot it, clean it.
Get a decent cleaning kit (if you don't already have one).
You can use a .22LR brush in the bore, but it's a good idea to get a 5.56/.223 chamber brush to use as well.

You may shoot 5.56x45 NATO or .223 Remington out of your rifle. Only shoot brass-cased factory loads during the "break-in" period - because if it malfunctions - you don't want to wonder if it's your buddy's reloads that are doing it !

 

[KeithR]

This is entirely optional!

And totally understandable

 

[KeithR]

I recall a recent print ad(from S&W) stating(something to the effect) that the break in period ended after the first round.

 

[oneyeopn]

I recall a recent print ad(from S&W) stating(something to the effect) that the break in period ended after the first round.

Yep the rules changed with the melonite treating, compared to other barrel materials or chrome plating. Clean it and shoot the fool out of it!

 

[str8liner]

I ran about 30-40 single shots through mine, cleaned and inspected it, then did a mag dump just to let it know I wasn't going to ***** foot around with it...

 

[Squirrel Master]

Not to be a total ****, but it is also helpful to read the owner's manual. I always do before cleaning, and then again after a good bath, lube, & function test. Lots of simple questions can be answered, and a few situations are addressed as well, such as fte's, ftf's, jams, etc.

Now, my old mind is retaining slower than it use to, so recently, I have found it more useful to read it more often, lol. Congrats on the new rifle!

 

[oneyeopn]

Now, my old mind is retaining slower than it use to, so recently, I have found it more useful to read it more often, lol. Congrats on the new rifle!

That is something I can really relate too!!

 

[zotzer]

My break-in period was very well-thought out and methodical.

I blotted the dripping-wet bolt with a paper towel and then shot the bejeezers out of it. And indeed, I giggled with delight the entire time, too.

Enjoy!
Tracy

 

[ICUMPD]

I read the entire owners manual and it said nothing about break in.... Now the giggling school girl thing I will probably do I did it when I first shot the 15-22.

 

[j_train_diesel]

I know this has been answered but for anyone who thinks its a good idea to not clean it before you shoot it be warned. I was lucky enough to get a brand new M4 at work, and by work I mean the Army, and I didn't clean it before I shot it. Why might you ask? I had 5 minutes to get my rifle and get on the truck. I didn't have any issues shooting but cleaning that joker afterwards was a nightmare! I am not sure why or what happened but the carbon was virtually glued to everything. I have learned cleaning carbon off of a "wet" gun is a lot easier than a dry one. Now I will say I have shot many a dry M4/M16's and never had any issues until it was time to clean. Another good thing to pick up is a bore snake. Simple thing to use to clean the barrel. Someday we will invent a clever device to clean the star chamber but until then Q-tips bent will do the trick!

 

[ICUMPD]

Well I cleaned the snot out of the gun, then proceeded to sight in the scope I put on it. After that was done I unloaded the magazine and grinned from ear to ear... Now to re clean it today.