Can’t hit anything with the CSX

Joined
Dec 3, 2018
Messages
99
Reaction score
137
Location
St. Louis, MO
Ok, it’s a bit of an exaggeration to say I can’t hit anything. I did place shots on the paper but they were all over with a group like 5-6 inches at 7 yards with CSX. What am I doing wrong?

I like the size, ergonomics, and SA of the CSX. Had a chance to shoot one at the range today.. I’m an experienced shooter including time with other SA subcompacts, like Kimber Micro 9 and Sig P938. And I do well with them. But I must be doing something wrong with the CSX.

Anyone else have this problem. Suggestions???
 
Register to hide this ad
Mine groups similar to other guns that size with me.
 
Years and years ago I had an AMT long slide (how I wish I never sold it) that I couldn't group. At the 50' indoor range one day with a buddy I complained about it and handed it to him.
He then fired 5 rounds and blew out the center black on a bullseye target.
Hmmmm....
 
Sometimes, guns just don't feel right. I had that with a 645, and a friend who spent 30 years as a police officer, complained when the department switched to Glocks. He swore he could not hit with that pistol, once missing an injured deer several times at 20 feet, but was a good shot with his revolver.
 
I have three possible answers:

1) You need more time to learn the gun.

2) You need to try a different backstrap, because it did not fit you as tested. If that doesn't work, the gun isn't for your hand type. It happens.

3) Switch to decaf on days you are hitting the range. ;)

So long as the group isn't heavily biased in one direction (low left, anyone?) I would not worry.:)
 
I am/was a dedicated 1911 shooter and carried a Micro 1911 daily for the last 17 years. I bought the CSX because of its feature package but it took me a while shooting it before I felt comfortable using it to replace my beloved 1911.
First I learned that the heavier trigger pull required a much tighter grip of the pistol to control the increased trigger stroke pull weight. The CSX is extremely small, light and with a short sight radius, you really have to hold on tight and bear down with the little pistol. (Kind of like a J frame revolver.)
Also, like others, I struggled with shooting low left until I figured out that I could not use my normal last finger pad placement on the trigger face, I had to move in deeper to the first finger joint on the face of the trigger and that brought my groups back into the center of my targets.
I put 1200-1500 practice rounds through my CSX's, (yes I now have 2, long story) starting out with very slow deliberate fire and gradually increasing speed and number of shots fired and distance until I felt comfortable and competent using it for daily carry.
 
Last edited:
I found the CSX to be very accurate when I have shot it. May want to check the sights just to make sure they ate centered properly.
 
I am a dedicated and very long time 1911 shooter. That actually applies to all of My handguns. With My CSX I sometimes hit, but always bounce clay targets on the 50 yard berm. I would have someone else shoot that CSX, or try several different types of ammo.
 
LVSteve in post #10 makes some good points. I had similar issues a few years back. I finally narrowed the problem down to hypoglycemia.

I needed to eat something about a half-hour before I stepped up to the firing line.

I tried eating a small 6 piece package of cookies from a convenience store a half mile from the outdoor range, but that sugar dump didn't work as well as the slower, longer lasting release from Junior Cheeseburger Deluxe from Wendy's.

It worked for me. Now, a quick drive-thru at Wendy's is part of my range routine.
 
Last edited:
Probably need to adjust grip and/or trigger finger placement. Took me a while to learn how to shoot my Shield. Some hands naturally fit some guns, some don’t. Experiment a bit. A dry fire laser can be very helpful telling you what grip/finger placement works, and what doesn’t.
 
First I learned that the heavier trigger pull required a much tighter grip of the pistol to control the increased trigger stroke pull weight. The CSX is extremely small, light and with a short sight radius, you really have to hold on tight and bear down with the little pistol. (Kind of like a J frame revolver.)
Also, like others, I struggled with shooting low left until I figured out that I could not use my normal last finger pad placement on the trigger face, I had to move in deeper to the first finger joint on the face of the trigger and that brought my groups back into the center of my targets.

That sounds like me with many guns. I have skinny hands with looong fingers (think Nosferatu) and trying to use the pad does not work on many guns.
 
My son has a Springfield XD...

It's a fine gun, very well made. I see no problems with it that I 'blame'. But I can't hit anything with it. I'm sure if I spent time with it I could 'work out' how to shoot it, but probably at the expense of shooting my own guns well.
 
Mckenney99's post is spot-on for what worked for me and a couple other friends - advice given to us by a big-name trainer. (And I also now have two! :D)
 
Back
Top