chiefdave
US Veteran
Last year I purchased a 28-2 that had been converted to 45 Colt by Clemens of Chino, CA. A Google search revealed very little about the man or his work. Anyone have anything to share.
The reason I ask is the workmanship and accuracy of this revolver is truly amazing. 50 yard groups are under 3" from a solid rest and a little over 4" just resting the butt on a solid surface using Hornady FTX 225 gr. factory loads. Did have to trim the tip of the bullets a bit because of the recessed cylinder. I'm not that great of a handgun shooter so these results were very satisfactory. Like to see what a really accomplished shooter could do with it.
The reason I ask is the workmanship and accuracy of this revolver is truly amazing. 50 yard groups are under 3" from a solid rest and a little over 4" just resting the butt on a solid surface using Hornady FTX 225 gr. factory loads. Did have to trim the tip of the bullets a bit because of the recessed cylinder. I'm not that great of a handgun shooter so these results were very satisfactory. Like to see what a really accomplished shooter could do with it.
![IMG_0906[1].jpg](https://cdn.smith-wessonforum.com/attachments/263/263234-73ff5257fb6cf60af9535775f05e6998.jpg?hash=vEKUHhD5yV)
![IMG_0905[1].jpg](https://cdn.smith-wessonforum.com/attachments/263/263235-83c31fcd903b200338b9fbac8c7a93c8.jpg?hash=qbtROhYVoL)
