CS9 Flush Fit Mags?

[unionguy]

I recently picked up a CS9! Does anyone know if there are base pads that fit the CS9 that don't have the pinky extension and/or would make it flush fit? Do 3913 flat mag base pads fit the CS9?

I thought I may have read somewhere that Kahr 9mm base pads fit the CS9, anyone know if that is true?

thanks!

 

[jsbethel]

Some info here - http://smith-wessonforum.com/140173390-post9.html

 

[Telecaster]

I bought some CS9 plastic flat base plates, i think Pearce makes them, but I can’t find them online now.

 

[GaryS]

The thread that jsbethel linked to has some great information. I've been able to get both the flat and TSW style baseplates from S&W CS by calling.

The part # for the flat butt plate is 20081000
The part # for the TSW wedge shaped but plate is 26267000.

The pre rail 3913TSW is "obsolete" in S&W parlance, so parts availability is spotty.

 

[TercGen]

I recently picked up a CS9! Does anyone know if there are base pads that fit the CS9 that don't have the pinky extension and/or would make it flush fit? Do 3913 flat mag base pads fit the CS9?

I thought I may have read somewhere that Kahr 9mm base pads fit the CS9, anyone know if that is true?

thanks!

You won't be able to make a CS9 mag totally flush-fit, but the flat 3913 base plates will be close. Others have used the metal Kahr 9mm base plates as well, which will shave off maybe 1/16" of an inch. Not much, but could make a difference with pocket carry.

 

[18DAI]

I use the 3913TSW baseplate on my CS9 mag when I want to carry it in a pocket or IWB. Works great. Regards 18DAI

 

[Telecaster]

I may have used Kahr plates, now that you mention that. They do work.

 

[unionguy]

Thanks all! Does anyone have a link to the Kahr baseplates you are referring to? I see flat metal ones and flat black plastic ones...do they both work or only one of those? thanks!

 

[gunhobbit]

Thanks all! Does anyone have a link to the Kahr baseplates you are referring to? I see flat metal ones and flat black plastic ones...do they both work or only one of those? thanks!

Kahr metal ones. I use them.

Though, interestingly enough, the 3906 flat plate actually creates a small "ledge" that fits my finger very nicely....

 

[jsbethel]

7rd magazines with curved, wedge, flat and 3906 floorplates.

There is a slight difference between 1st/2nd and 3rd gen magazine tubes that will not allow the 639 metal floorplate to easily slide on.

 

[unionguy]

Is this the one you are referring to? Just want to make sure I order the correct one. thanks!

https://shopkahrfirearmsgroup.com/pistol-parts/kahr-037m4e-magazine-base-038m9s.asp

 

[TercGen]

Is this the one you are referring to? Just want to make sure I order the correct one. thanks!

https://shopkahrfirearmsgroup.com/pistol-parts/kahr-037m4e-magazine-base-038m9s.asp

That's the one, made to work with the Kahr MK9. Let us know how it works out for you.