CS9 Sight Qs

[18DAI]

I am getting new sights for my LNIB early production, black CS9.

I am installing a Trijicon SA29F front night sight. I am wanting a blacked out Novak rear. My question is, does the factory metal rear sight - 107920000 fit the CS9? Or just the 3913 series?

My next question, if anyone knows, is will POA = POI with a Novak rear and an SA29F ?

What about Novak's rear sight, LMSW01-H ? Already blacked out, but doesn't say if it fits a specific model. Just 3rd gen 9mm.

Are the CS9 rear dovetails the same as the 39XX series? They appear to be. Thanks for any assistance! Regards 18DAI

 

[jsbethel]

My question is, does the factory metal rear sight - 107920000 fit the CS9? Or just the 3913 series?

I assume that is the sight installed on the later CS9s instead of the plastic sight - mine is from 2004.

Continuing with that assumption, I had BMCM install a set of Trijicon SA24 sights for the 3rd gen compacts. The front sight of the SA24 (same as SA01F) is the same overall height as the SA29 front sight (.217") but is slightly longer. I prefered the SA24 Novak rear sight to the SA29 rear and essentially already had a set in my possession instead of waiting for Trijicon to catch up.

 

[JohnHL]

I am getting new sights for my LNIB early production, black CS9.

I am installing a Trijicon SA29F front night sight. I am wanting a blacked out Novak rear. My question is, does the factory metal rear sight - 107920000 fit the CS9?

My later production CS9S has the metal Novak rear and I'm pretty sure it is the old faithful #10792.

Or just the 3913 series?

Both.

My next question, if anyone knows, is will POA = POI with a Novak rear and an SA29F ?

As I'm sure you already know, if POA=POI with the sights it currently has along with the ammo you are shooting, then it will stay the same if the new sights are the same height as the old ones or, if the new sights are the same amount shorter or taller, both front and rear, than the current sights.

What about Novak's rear sight, LMSW01-H ? Already blacked out, but doesn't say if it fits a specific model. Just 3rd gen 9mm.

Then they should fit.

Are the CS9 rear dovetails the same as the 39XX series? They appear to be.

I believe they are.

Thanks for any assistance!

You're welcome!

Regards 18DAI

Right back at ya!

 

[18DAI]

Thanks very much gents! Much appreciated!

I am going to call Novaks Monday, to check on the blacked out 3rd gen rear sight. And once thats done either order it, or go with the Novak 10792, for the rear.

I went ahead and ordered the SA29F. The height listed matched a standard 3913 front sight.

Now to contact BMCM and get in line. Thanks again! Regards 18DAI