display box 29-2

[gregC.]

I know this has been talked about many times here but i need to know in the bottom of the small tool hold there is a piece of card board stapled to the bottom , did foam rubber cover this from the factory ? I 'am getting ready to reflock the plastic bottom half , and while i'am asking what covered the top foam ,flock or cloth ? Greg

 

[vrichard]

I know this has been talked about many times here but i need to know in the bottom of the small tool hold there is a piece of card board stapled to the bottom , did foam rubber cover this from the factory ? I 'am getting ready to reflock the plastic bottom half , and while i'am asking what covered the top foam ,flock or cloth ? Greg

The card board stapled to the bottom was flocked on my box,on the top foam was covered with flock in my box.here is one I just got thu flocking.
Dick

 

[saemetric]

The stapled cardboard one is not flocked but the one over it is as well as the cover w/knob

 

[TDC]

Expert Commentary by Doc44 (Bill Cross) about presentation cases can be found at the following address.

http://smith-wessonforum.com/blogs/doc44/18-presentation-cases-44-magnum-1957-1985.html

Like so many thing S&W, cases are interesting because there are so many variations and styles... If you're going to make the investment it's best that it be correct....

 

[gregC.]

Thanks all , info was all great . Saemetric do i understand correctly the stapled cardboard insert ,is coverd by a seperate, flat ,flocked piece of cardboard inside the tool well.