Happy 60th Birthday K-38

STG38

Member
Joined
May 27, 2008
Messages
73
Reaction score
25
Location
CO
002.jpg


Happy 60th birthday to my K-38 shipped on December 9, 1949, to Bacharach Rasin Co in Baltimore. The S/N, K79676, is stamped on the barrel flat, on the bottom of the frame, the extractor, and on cylinder face. It has been modified since it left the factory, as it now has a red-ramp front sight (base pinned to barrel rib with two pins through the rib), white-outline rear sight, target hammer, target trigger, and smooth target stocks with S&W medallions and a football cutout for cartridge case head relief. There are no stampings of any kind (except for the serial number) on the frame under the stocks. The factory letter says it "was manufactured before all the target accessories were available." The Standard Catalog of Smith & Wesson, 3rd Edition, page 144 shows a similar 5-Screw K-38 Masterpiece with a red-ramp front sight, target trigger, and target stocks. K79676 is in excellent condition with slight muzzle wear and typical cylinder stop drag marks. Can anyone help identify the wood used in these stocks?
 
Register to hide this ad
Happy Birthday

That is a real beauty !
Have a pice of cake for me .
AL Deputy
 
The wood is a rosewood - maybe Goncalo Alvez, which is usually
more orangish, but with that same straight grain, or perhaps another
rosewood.

1950 seems to be the introduction of the 'low-spar', or target hammer.

Later, Mike Priwer
 
Being born in 1949,i had to click on this. Imagine my surprize when your beauty is configured exactly like my 1969 model 14!
Are the stocks on your gun "matched" as to the grain?

Regards,

Tecolote
 
Tecolote: Yes, the end grain is very well matched on these stocks, much like "presentation" stocks.

Mike Priwar: Thanks for your thoughts on the stocks being rosewood. I thought they might be, since there is not much of a hint of orange.
 
I own its younger sister shipped on March 12, 1951 to Bacharach Rasin Co., It is in it's original box. Target stocks on it won't fit in the box when they are on the gun. You have to remove them.
 
THAT is a beautiful revolver! Congratulations, ... very tasteful modifications - especially the stocks.

Thanks,

Jerry
 
Back
Top