How do I remove my 360 cylinder assy?

[WC145]

I want to send the cylinder assembly from my 360 to Robar to be coated but don't know how to remove it from the gun. Any help would be greatly appreciated!

 

[WC145]

I want to send the cylinder assembly from my 360 to Robar to be coated but don't know how to remove it from the gun. Any help would be greatly appreciated!

 

[tmbrcruizr]

Take the forward most screw out of the side plate, open the cylinder and it should just slide out.

 

[Gun 4 Fun]

If you have the owners manual it should give a detailed description of how to remove and reinstall the cylinder/crane assembly for cleaning. Just do the first part to get it ready for shipping and use the reinstall instructions to put it back together when you get it back from Robar. The above post is a very abrieviated but accurate description. Just be careful when wiggling the crane assembly from the frame.

 

[imashooter2]

A tip to help avoid marring the frame... Remove the screw, swing the cylinder out, then hold the cylinder in place and pull the crane forward out of the frame and cylinder at the same time.