Ivory, mammoth and elephant

[JRB416]

I like the way ivory dresses up a handgun. I know it might not be to everyone's taste, but it's easy to swap back to factory stocks. (except for the Colt SAA, it is wearing factory ivory).

The Para stocks were from Nutmeg Sports. The mammoth ivory drop point hunter knife was from a knife maker in Berea, KY. The folders are Tuna Valley Phoenix Jacks.

 

[Rudi]

I never knew Mammoth tusks were available to make grips from. Pretty gool.

 

[colt_saa]

I love the look of ivory on a fine firearm. I currently own many revolvers and semi-automatic pistols that wear Ivory grips. Including the revolver that is in my avatar

Here is a set of Wooly Mammoth grips that I am saving for a long slide 1911 i'm currently working on

Since the tusks from Siberia are more than 10,000 years old these are exempt from the silly Ivory laws that some of our left wing Presidents have supported in recent years

These tusks could not have been poached from the animal since many thousands of years before Christ was born

 

[JRB416]

Colt_SAA, very nice set of mammoth ivory stocks for your long slide. I think most classic handguns look good with ivory but to me the Colt SAA with "one piece" smooth ivory grips is the epitome.

One thing about mammoth ivory is the diversity of colors and patterns attainable. From greens, blues, browns, etc, to creamy whites that resemble elephant ivory. I've seen some very interesting 1911 grips made out of mammoth teeth as well.

Here are a couple of mammoth teeth just for interest.

 

[CH4]

I own a few sets of elephant ivory grips on 1911s, along with sets of came and giraffe bone and antler. Although lacking the je ne sais quois of ivory, quality bone and antler is much cheaper, less controversial and they look just as classy. Actually, I think creamy white and purple moose antler that Ken makes looks better than ivory.

 

[THE PILGRIM]

I need to reshoot these.
Oosik Handled Ulu and a Drop point Hunter made by NM Knife-maker Cody Wescott (RIP).
So what is Oosik?
Fossilized Walrus Penis Bone.

 

[JRB416]

I would not disagree with you at all CH4. Antler of different types make some of the most beautiful handgun stocks and knife scales there are. I have a number of knives with sambar and burnt stag and they are amongst my favorites. I even have a few with elk antler.

Your right about camel bone as well. I've seen some very nice examples.

I don't own any of Ken's work but I have greatly admired it since joining the Forum a few years ago.

I guess I just get a little weak in the knees whenever I see great looking stocks on any classic handgun . Ivory, bone, stag, or figured wood, carved, checkered or smooth they are all great.

 

[JRB416]

I need to reshoot these.
Oosik Handled Ulu and a Drop point Hunter made by NM Knife-maker Cody Wescott (RIP).
So what is Oosik?
Fossilized Walrus Penis Bone.

Beautiful drop point hunter in the Loveless style. My favorite fixed blade knife.

 

[ameridaddy]

The Colt carried me right back to 1950's cowboy movies.
Thanks for sharing some pretty work!

 

[younggun22]

I have a set of mammoth tooth 1911 grips made by Brian Challis. Really incredible set I just don't have anything nice enough to put them on so they just sit in a box

 

[JRB416]

I have a set of mammoth tooth 1911 grips made by Brian Challis. Really incredible set I just don't have anything nice enough to put them on so they just sit in a box

View attachment 701209

Younggun, you need to correct that problem asap! Nice mammoth tooth, those would look good on blue, nickel, or stainless.

 

[SGT ROCK 11B]

I have a set of mammoth tooth 1911 grips made by Brian Challis. Really incredible set I just don't have anything nice enough to put them on so they just sit in a box

View attachment 701209

Gorgeous grips so I would suggest the Colt Government in bright stainless steel. Look of nickle with the advantage of stainless steel.

 

[younggun22]

I just don't think it's in the cards. So if anyone has a suitable piece maybe we can work something out!

 

[bdGreen]

Blued steel and ivory.
Just perfect.

enjoy,

bdGreen

 

[MG34/bar]

I too like the look of Ivory, but not the cost. I have a few stag stocks from Patrick and, if I ask for only a little bark on them they have a similar classic appearance.

 

[JRB416]

Blued steel and ivory.
Just perfect.

enjoy,

bdGreen

No arguments here, beautiful, thanks for the photos.

 

[DHernandez]

I need to reshoot these.
Oosik Handled Ulu and a Drop point Hunter made by NM Knife-maker Cody Wescott (RIP).
So what is Oosik?
Fossilized Walrus Penis Bone.

If my fossilized parts are ever used, it'll be derringer grips…

 

[Onomea]

M65, originally from the Lubbock PD, tuned by Grant Cunningham, gold ring on bbl and inlay on front sight by Dan Love and elsewhere by somebody else. Ivories by Dan Collins, and holster by Mitch Rosen.

 

[JRB416]

Very nice, I like everything about it. Thanks for the photos.

 

[colt_saa]

While I have many firearms with Ivory grips I only own 2 Smith & Wesson revolvers that have Factory Ivory on them

In both cases that is African Elephant Ivory

This first revolver is a model 544 this is the Deluxe Edition of the Texas Sesquicentennial Commemorative Revolver which tends to be called the Texas Wagon Train. That it is easy to understand since the Texas Wagon Train is depicted on the side plate of the Standard Edition and scrimshawed into the ivory grips of the Deluxe Edition

The second one is my model 649 1st day of production. This is one of my favorite sets of ivory grips, I love the coloration on these

 

[ISCS Yoda]

Some natural things make gorgeous additions to our favorite tools. I'm going to drop in some knives:

Muela Orix Muela - stag, I think

Ulu - antique mammoth in a not-so-antique antler base

Puma Prince - stag I think

Hammer brand - vintage thing - mother of pearl

Two Gerber Silver Knights - one mother of pearl, one either stag or jigged bone

Western brand? - antique pocket knife - mother of pearl

RR Horseshoe - Mastodon, I think, not mammoth

 

[JRB416]

Thanks everyone for sharing some beautiful handguns and knives.

Not ivory, but here are a few knives with what I think are great looking scales.

Left two, elk antler.

Second from left, bottom row, rams horn.

Right three, stag.

 

[2152hq]

A few states ban the sale/trade of Mammoth Ivory in the same way they do Elephant and other species ivory.
You can probably guess which ones they are.

The usual excuse for including the 10k yr old stuff in the regulations is that someone might slip some recently poached Jumbo ivory into the mix.

Too bad we just don't seem to be able to get a handle on the crazy popular illegal Ivory trade like we've crushed the illegal drug, smuggling rings & violent gangs.

There must be a way..
Perhaps we could pass a Law!

 

[BillBro]

I need to reshoot these.
Oosik Handled Ulu and a Drop point Hunter made by NM Knife-maker Cody Wescott (RIP).
So what is Oosik?
Fossilized Walrus Penis Bone.

I think theyre good a dead. Dont waste your ammo.

 

[THE PILGRIM]

Here's a couple of Cody Wescott Folders.
I don't have a Mammoth Handled Knife,
But I would like to!

 

[Onomea]

My Great Eastern trapper:



Sambar stag scales. I lost it behind some furniture for several years, and was well pleased when it turned up again in a move.