Lets See Some TSW Pics....

[Nalapombu]

Hey all,

I have always liked the TSW pistols, particularly the 9mm and 45ACP versions. I will admit that the 45ACP is a bit on the heavy side for carry, but it would certainly serve well in the home or car or even on your side while out and about in the woods.

Anyway, I'd like to see some pics of TSW's that you all might have. Not only will it bring back memories, it'll also make me want to get one.

Thanks

Nalajr

P.S. I also like the 915 and those "budget" series of semi autos.

 

[smitty_bs]

Here's my my 4563TSW. Never been fired since leaving the factory though. I bought it and soon after got into 1911s. Guess this one's been ignored.

 

[RGPM1A]

Here you go. My 3914TSW.

 

[rags]

Sorry no 9mm or 45acp TSW's but, here is a 4013TSW. (1997 Pre-Rail)

rags

 

[RSBH44]

Hey Rags, thats a really nice stout little 40 ya have there. I like it!!
Here is my (pre-rail) 3913

 

[KPSqured]

4513 TSW

 

[rags]

THAT'S what I've been searching for!!!!! 4513 TSW non-rail !! UGH!! Nice...

Please add rags to the Karma!!

 

[VTHokiesDuckHunter]

Smitty_bs-

your 4563 TSW looks pretty sad not being allowed out of the safe much, nor being fired beside your 1911's.

Let me know if you ever want to sell her to a good home!

-Another Smitty

 

[cmr0323]

1ST TSW

Here's my first TSW, a 3913TSW w/o a rail.

 

[Punisher102]

THAT'S what I've been searching for!!!!! 4513 TSW non-rail !! UGH!! Nice...

Please add rags to the Karma!!

Umm Dude, that is a Railed 4513 with the rail removed. You could buy mine Here and have a gun smith remove it too.

None the less, here are mine, 4013TSW pre rail and 4513TSW with the rail.

 

[rags]

Umm Dude, that is a Railed 4513 with the rail removed. You could buy mine Here and have a gun smith remove it too.

None the less, here are mine, 4013TSW pre rail and 4513TSW with the rail.

Must have been dreamin'! A quick look back and I see it now. I saw yours...

rags

 

[Philip Marlowe]

One of my favorites TSW...

 

[Bartman3562]

Mid size

Don't forget the 4.25 inch guns
5903TSW
4003TSW
4563TSW

 

[10mm Sonny]

 

[40cal]

4003 TSW

4003tsw

 

[blujax01]

5906 TSW purchased from my range Memorial Day weekend. A number of them were used for demonstration purposes in CCW classes for 5 years but never fired.

 

[CL21376]

I don't see these very often...4553TSW

 

[Ranger98]

Thanks to Bartman 3562,I was able to add to my TSW collection recently ..

 

[Ogandydancer]

5903 TSW PD trade in

 

[KPSqured]

THAT'S what I've been searching for!!!!! 4513 TSW non-rail !! UGH!! Nice...

Please add rags to the Karma!!

Yes, sorry, it's a 4513TSW with the rail removed. The holes were filled with a black epoxy so it's very flush with the dustcover/frame.

I don't know why they put a rail on the 4513TSW.

I fired it for the first time today, the previous owner had only 100 rounds through it. I had replaced both recoil springs and the extractor spring since the gun is a few years old.

I had 3 failures to feed out of 50 rounds. All with full 7 rounds mags on the second round. The round wouldn't chamber all way, only about 2/3 the way. One bullet had a pretty good gouge in it. Otherwise it shot without incident, but the FTF don't have me confident with the pistol yet. I was shooting UMC target ammo, 230 grain. I will shoot several more hundred rounds through it before I make a final opinion of it.