Load Assist Buttons

[thomaswgoodwin]

Anyone got any leads on how to get stock or aftermarket load assist buttons? I ordered a couple 10 round long magazines today and I'm planning on modifying them to 25 rounders. I had seen just using a nut and bolt here and there but I wasn't sure if there were any nicer looking options out there.

 

[Bamabred]

Raven Eye Custom - M&P15-22 Upgrades

 

[Dezfan]

I picked a few of these up when I converted my 10 rounders.

Smith and Wesson 15 22 or 15 22 Load Assist Button for Magazines | eBay

 

[Bamabred]

I was just about to post that link. I ordered some from Ebay

 

[M4tank]

Anyone got any leads on how to get stock or aftermarket load assist buttons? I ordered a couple 10 round long magazines today and I'm planning on modifying them to 25 rounders. I had seen just using a nut and bolt here and there but I wasn't sure if there were any nicer looking options out there.

Been lurking here since I picked up the 15-22 back in early January.

I got the 2 as well from Midway and one of the 2,100 round packages from Cabelas!!! All in one day!

Canceled my order from promag for 2 32 rounders placed 1/16/2013... I am glad to I thought they were a tad too long and I wanted S&W ones anyway. I have "email me when in stock" with about30 companies it seems. I could've gotten one from 44mag.com, but I wasen;t going to pay $60 for one 25 round magazine.

I think I'll order the ones from ebay cause I plan on makin them 23 rounders (read you had to modify the follower to get 25 rounds?) as soon as they arrive.

Both Cabelas and Midway say shipped.

Thanks again guys!

 

[Bob275]

Raven Eye Custom - M&P15-22 Upgrades

The way to go... they have the best customer service.

 

[mcweb13]

The quality metal works are very excellent quality

 

[mcweb13]

Also he offers discounts if you purchase in high quantities

 

[Scopes]

The REC's are great. Plus, you can try the loading tool out.

 

[thomaswgoodwin]

I picked a few of these up when I converted my 10 rounders.

Smith and Wesson 15 22 or 15 22 Load Assist Button for Magazines | eBay

I grabbed a couple of these because they were cheap and I think I got what I paid for. I converted my mags today but these LABs stick about half way down the mag and have to be kind of rolled down by spinning them as opposed to just pushing them down. Has anyone else experienced this problem, or is that why there is a hole in the center? So that it can spin freely around some type of rod? I think I'm going to order some of the Raven Eye Customs, but not if they have the same issue.

 

[Bamabred]

I grabbed a couple of these because they were cheap and I think I got what I paid for. I converted my mags today but these LABs stick about half way down the mag and have to be kind of rolled down by spinning them as opposed to just pushing them down. Has anyone else experienced this problem, or is that why there is a hole in the center? So that it can spin freely around some type of rod? I think I'm going to order some of the Raven Eye Customs, but not if they have the same issue.

I received mine today, but I haven't modded my mags to install them yet.

 

[nquinto2]

I grabbed a couple of these because they were cheap and I think I got what I paid for. I converted my mags today but these LABs stick about half way down the mag and have to be kind of rolled down by spinning them as opposed to just pushing them down. Has anyone else experienced this problem, or is that why there is a hole in the center? So that it can spin freely around some type of rod? I think I'm going to order some of the Raven Eye Customs, but not if they have the same issue.

I have the Raven Eye Customs LABs and have installed them on all my mags. Some of them did the same as you experienced. They just need to be worked a little. Push them down several times and they'll loosen up.

 

[thomaswgoodwin]

I have the Raven Eye Customs LABs and have installed them on all my mags. Some of them did the same as you experienced. They just need to be worked a little. Push them down several times and they'll loosen up.

I appreciate the info!

 

[Dezfan]

I grabbed a couple of these because they were cheap and I think I got what I paid for. I converted my mags today but these LABs stick about half way down the mag and have to be kind of rolled down by spinning them as opposed to just pushing them down. Has anyone else experienced this problem, or is that why there is a hole in the center? So that it can spin freely around some type of rod? I think I'm going to order some of the Raven Eye Customs, but not if they have the same issue.

I haven't had any issues with the ones I installed on my converted mags?

They cycle just like the factory LAB's.

I just ordered a couple more mags, so I need to order a few more of the LAB's that are listed in the link.

I'll keep an eye on the new ones after I mod the incoming mags and install the LAB's. If I have any issues, I'll be sure to post up about them.

 

[Heatwave3]

I made my own load assist buttons. They were cheap and easy. Just went to my local ACE Hardware store and picked up a bunch of nylon 10-24 x .75in bolts and matching nylon lock nuts. Just trim the excess bolt and grind or sand the nut to be slightly thinner so the mag fits in the 15-22 magwell. It works great.

This is a pic of my load assist buttons on a 15rd shortened mag that I made.

 

[Sr.Plankton]

Nice Job Heatwave3

That's some nice work on that mag. How much did you have to trim off to achieve the 15 round capacity?

 

[Heatwave3]

That's some nice work on that mag. How much did you have to trim off to achieve the 15 round capacity?

Here's a thread I put together on how to make a 15rd magazine out of the oem S&W 10rd long magazine (or out of a 25rd magazine). It's a pretty easy project and its actually kinda fun to do. Makes for a much better setup for bench shooting or for use in States with a 15rd magazine limit.

http://smith-wessonforum.com/smith-wesson-m-p-15-22/309766-how-make-15rd-oem-s-w-magazine-pics.html

 

[Sub MOA]

Found these with free shipping....

http://www.raveneyecustom.com/Pages/MP1522.aspx

The way to go... they have the best customer service.

I found them on 1022armory.com also. They have a coupon code for free shipping on $20 purchase.. use 1022FS

 

[RedNeck Jim]

I have the Raven Eye Customs LABs and have installed them on all my mags. Some of them did the same as you experienced. They just need to be worked a little. Push them down several times and they'll loosen up.

I just installed 2 sets of Raven Eye & I too experienced them being too tight. Working them up & down a few times helps some but they are still noticeably hanging up about half way down. Not sure if this will cause feed issues or not. As they hang up, the buttons start spinning as opposed to simply sliding down.

If I take a S&W 25 round magazine & push on their buttons, there is a very noticeable amount of play back & forth. With the Raven Eye buttons, it is noticeably tighter.

 

[zload]

I ordered some from Raven Eye as I'm simply trying not to order anything from AntigunBay given their stance on my favorite toys, not really a boycott per se just avoidance when I can... which is most of the time