m&p22 safety plug
- Thread starter jobiin
- Start date
IntenseImage
Member
- Joined
- Sep 3, 2012
- Messages
- 56
- Reaction score
- 12
It makes it no less safe than the centerfire models which come without mag and thumb safeties.
You have the trigger safety and the huge one between your shoulders
Sent from my Galaxy Nexus using Tapatalk 2
You have the trigger safety and the huge one between your shoulders
Sent from my Galaxy Nexus using Tapatalk 2
catcus-jack
Member
People have put one through their foot with pistols that have every safety available.Patent infringement really?
Who carries the m&p22 loaded? Who carries it at all? I think the purpose for this mod is to make it look neater while it's either hanging on your wall, or in your safe. If you're concerned about shooting yourself in the foot while at the range, you probably aren't practicing safe and smart range procedures.
Also, with this mod, a replacement dowel is interested, acting like the original safety only on unsafe. It's no different than a full size with no safety and a magazine safety.
Also, with this mod, a replacement dowel is interested, acting like the original safety only on unsafe. It's no different than a full size with no safety and a magazine safety.
Maddmax
US Veteran
Stupid is as stupid does (concerning safety).
He has made an unauthorized modification to the weapon. People love suing over anything... It won't be S&W that takes a hit if some one does something stupid...
catcus-jack
Member
He has not done anything but make a decorative plug.
Maddmax
US Veteran
AFTER he removed the "ambi" thumb safety from the weapon.
The M&P-22 comes with an "ambi" safety from the factory. There is NO S&W option for having a M&P-22 with out an "ambi" thumb safety. That's where the problem lies. If some one (heaven forbid),gets hurt,killed,shoots the dog,or what ever... The first thing that will be asked is why was the FACTORY thumb safety removed and replaced with a plug ? Now,where is the liability ? Not S&W. They replace ALL unautherized parts and make sure the weapon is at S&W's factory spec's before being shipped back to the owner. Now,does the liability fall on the person that removed the SAFETY part ? The person that made the plug to cover the SAFETY removed hole ? Or both ? One for making it and one for using it. ...it's going to be the person that gets hurt that will be making the big $$$$$$$$. And the whom ever's will be the one's paying out the big $$$$$$$$. Remember where we live,lawer's just love this kinda stuff.
MichiganScott
Member
The difference is the M&P-22 operates with an internal hammer and is single action. The center fire M&P are double-action only and striker fired. Removing the safety on the 22 and relying on the trigger safety is no different than removing the safety on a 1911 and relying on the grip safety.
Again, your gun, your call. However, it's apparent you have no idea how both versions operate and what the difference is.
George9
Member
How do you figure that other M&P's are double-action only? The strikers are fully cocked and fully set or not.They are fully cocked or they are not. There is no in between, unlike a Glock where the striker is half set till you continue the trigger pull DA.. George
Sorry for the delay. I finally got my 3d printer back up and running.
For any of you who wanted safety plugs for the M&P22, email me at [email protected]. It'll be easier for me to communicate through email over the PM system here.
I'll be able to send them this week. Email me if you're interested, and I'll fill you in with details.
Cheers
For any of you who wanted safety plugs for the M&P22, email me at [email protected]. It'll be easier for me to communicate through email over the PM system here.
I'll be able to send them this week. Email me if you're interested, and I'll fill you in with details.
Cheers
IntenseImage
Member
- Joined
- Sep 3, 2012
- Messages
- 56
- Reaction score
- 12
Email sent
Sent from my Galaxy Nexus using Tapatalk 2
Sent from my Galaxy Nexus using Tapatalk 2
thanks
ColoradoDave
Member
- Joined
- Aug 2, 2012
- Messages
- 68
- Reaction score
- 8
Just sent you an email, count me in!
Hey Everyone.
Thanks for the interest in the plugs. I am about to print a batch of about 50 of these things because of all the orders I'm getting.
If you're interested in some plugs, email me at [email protected]
Cheers.
Thanks for the interest in the plugs. I am about to print a batch of about 50 of these things because of all the orders I'm getting.
If you're interested in some plugs, email me at [email protected]
Cheers.
Dikinalaska
Member
How would this be his liability? All he did was give someone a little piece of plastic, their the ones that removed their safety.
bolewine
Member
What kind of paint did you use and what finish eg:flat semi gloss and brand is it made for plastic?
Dikinalaska
Member
They look great. Are they textured too?
