jackrabbit000
Member
Can someone tell me what size the hex keys are for the M&P22 front and rear sight. I can't find the ones that came with the gun and don't have any at home. Thanks.
-
Forum Update: We've upgraded the software to improve security, performance, and the overall experience.
👉 Read why we made the change | Support the Forum
M&P22 Sight Hex Key Sizes
- Thread starter jackrabbit000
- Start date
Register to hide this ad
tgmorris99
Member
It takes a decent quality 1/16" allen wrench.
OP
jackrabbit000
Member
So both the front and rear the same size?
Update - found the answer on another forum. The front sight uses a .050 hex key.
Update - found the answer on another forum. The front sight uses a .050 hex key.
Last edited:
- Joined
- Mar 30, 2017
- Messages
- 1
- Reaction score
- 2
M&P22 windage allen key
1/16 is too large for my M&P22 - the best fit I've found is a 1.3 mm hex, the next best (a bit loose) is a 0.05" SAE hex. You can order a 1.3 hex with handle from Amazon for typically less than $4. The one they provide with the gun is too easy to lose.
1/16 is too large for my M&P22 - the best fit I've found is a 1.3 mm hex, the next best (a bit loose) is a 0.05" SAE hex. You can order a 1.3 hex with handle from Amazon for typically less than $4. The one they provide with the gun is too easy to lose.
