Magpul CTR Stock?

[PeglegJones]

Will that stock work on a 15-22?

Sent from my Pixel XL using Tapatalk

 

[Rob1]

If you buy the mil spec one. Yes it will.

 

[cyphertext]

Same one that works on your Sport 2!

 

[Majorlk]

Excellent choice. All three of my family's 15-22s have them.

 

[tomcatt51]

And there are different height cheek risers available for it.

 

[bacardigold]

And there are different height cheek risers available for it.

It's my understanding that these don't work with AR15/M4 style rifles as they interfere with the charging handle.

 

[Rob1]

It depends on how far out the stock is extended.

I have one on both my SGC LR 9mm and SGC LR 223. Work fine with stock fully extended for first round charging then I drop a notch for shooting.

Also works fine with my smith although the LOP is shorter on the charging handle of the Smith so no need to worry about fully extended Buttstock.

Hope that helps.

Rob

 

[tomcatt51]

It's my understanding that these don't work with AR15/M4 style rifles as they interfere with the charging handle.

The stock needs to be extended. OR, mount the riser "backwards". This requires trimming a rib on the underside of the riser slightly for clearance and trimming the length of the riser if you're using the std CTR butt pad. The plastic riser cuts easy. With the thicker optional butt pads you only need to trim the rib on the underside. I run a C-more with a 1/4" riser with the thick butt pad (I like the contour it has) and shoot with the stock fully collapsed. No charging handle clearance issues.

 

[Majorlk]

It's my understanding that these don't work with AR15/M4 style rifles as they interfere with the charging handle.

Incorrect! I have them on three 15-22s with no interference problems in any extension.

 

[PeglegJones]

I just put one on my 15-22 and it works great.


Sent from my Pixel XL using Tapatalk

 

[bacardigold]

I stand corrected. (Slaps wrist)