Model 29

[wwonka365]

I would be interested in what this group would think a New in the Case, 6 1/2 inch, 5 screw Model 29 would be worth. It is unfired with all the paperwork in the original blue leatherette? case with the tools including the all blue screwdriver. Not really looking to sell as I've owned it since 1972. I also have a Jinks signed letter dated 1972 that states the ship date of the gun. Thanks for your help.

 

[DWalt]

Would probably be best if you posted a few good pictures of exactly what you have, also the factory letter.

 

[VM]

I would be interested in what this group would think a New in the Case, 6 1/2 inch, 5 screw Model 29 would be worth. It is unfired with all the paperwork in the original blue leatherette? case with the tools including the all blue screwdriver. Not really looking to sell as I've owned it since 1972. I also have a Jinks signed letter dated 1972 that states the ship date of the gun. Thanks for your help.

Welcome to the Forum!
Based on your desciption, I'd say a minimum of $5K. In an auction, it would probably bring much more.
Good that you are keeping it - be wary of your PM box exploding this afternoon

 

[jackvs1]

You mean something like this, pre 29, 5 screw, coke grips with the fixins? I like the $5000 price tag but I know for sure mine won't go for that. I was thinking $3,500????

 

[stmry]

I concur with VM.

 

[boykinlp]

I would be interested in what this group would think a New in the Case, 6 1/2 inch, 5 screw Model 29 would be worth. It is unfired with all the paperwork in the original blue leatherette? case with the tools including the all blue screwdriver. Not really looking to sell as I've owned it since 1972. I also have a Jinks signed letter dated 1972 that states the ship date of the gun. Thanks for your help.

That package is a real gem and I would like to see some pictures of it too! I think the screwdriver in jackvs1's post is the one you need. Also having the correct "Coke" grips are really important.

 

[wwonka365]

I have posted some pictures. Thanks.

 

[410bore]

Very nice "44 Magnum"

A few things to note;

-The cleaning brush is not the correct type and should have the brass core like your mop.
-The SAT should be the aluminum knurled variety.
-The warranty card appears to be original but the owners manual does not belong with your 44, it is too new and is for a Model 29. I am not sure when the target was originated but it may be too new for your revolver as well...


Is the case numbered to the gun on the bottom?


P.S.

Here is what the tools should look like;

 

[Doc44]

Very nice 44 Magnum that was most likely shipped in the first half of 1957. The correct sight screw driver would have a knurled aluminum handle. The Parts & Instruction sheet was introduced in 1960 and the dry fire target in the early 60s. The brush would have a brass threaded base and brass core. I mention these issues not to be critical, but only so you will know what is correct for your 44 Magnum.

 

[2bits]

Jealous guy here. Don't have a price for you but very nice.

 

[wwonka365]

Both the brush and the mop have brass cores, the yellow, brass core in the brush doesn't show up correctly in the photos. You are correct about the instructions, the effective date of the parts prices on the sheet is January 1 of 1960. I disagree about the screw driver, everybody I know says the all blue screw driver is correct for this gun. It was shipped from the factory on May 2, of 1957 according to the Jinks signed letter.

 

[Doc44]

The all steel sight screw driver finished in black oxide was replaced by the sight screw driver with the aluminum handle in 1956. I have several 44 Magnums shipped in the first few months of production and they each have the sight screw driver with the knurled, aluminum handle.

Bill

 

[Muley Gil]

Both the brush and the mop have brass cores, the yellow, brass core in the brush doesn't show up correctly in the photos. You are correct about the instructions, the effective date of the parts prices on the sheet is January 1 of 1960. I disagree about the screw driver, everybody I know says the all blue screw driver is correct for this gun. It was shipped from the factory on May 2, of 1957 according to the Jinks signed letter.

Doc44 knows more about S&W .44 magnums than most of us know about our own mommas!

 

[wwonka365]

I guess I stand corrected on the screwdriver issue. Thanks for the information. And, does anybody have the correct screwdriver that would trade for this screwdriver. Thanks.

 

[wwonka365]

Not too happy

Not to happy about learning the real deal on a gun I've had for over 40 years that I thought was right as rain. The gun itself is no problem, but the wrong screwdriver and booklet is somewhat disheartening. Contemplating selling, I guess that's food for thought.

 

[DWalt]

It is what it is, but it is still possible to find the correct paperwork and SAT should you want them.

 

[jackvs1]

I guess I stand corrected on the screwdriver issue. Thanks for the information. And, does anybody have the correct screwdriver that would trade for this screwdriver. Thanks.

Hang in there - I purchased to screwdriver off a forum member, if I can remember I will let you know, but put a WTB in the part/s accessory section here on the forum. BTW - they are expensive. Most of all remember you have a beauty of a revolver. Good luck

 

[gkitch]

Your early sight adjustment screwdriver is as valuable or more so than the proper one. It should not be difficult to make a trade.

Beautiful 44 Magnum.

 

[VM]

Your early sight adjustment screwdriver is as valuable or more so than the proper one. It should not be difficult to make a trade.

Beautiful 44 Magnum.

EXACTLY! The black SAT does not detract from the value of your gun and the "booklet" is dated 1960 so you knew it wasn't proper.

 

[DWalt]

I was going to make the about same comment earlier, but didn't. I'd think someone should pop up with an offer to swap SATs with not too much to boot (if any) in either direction.

 

[Göring's S&W]

While its true there is what is original vs not original with accessories and with anything, in some cases it basically does not matter. No one would think less of this package over a brush and a blued SAT or a manual from 1960 with a gun from 1957. At a point, it becomes splitting hairs. The gun itself, the bluing and grips and the case aka the important stuff is there, and its a beauty - this is a great package. You have the important stuff so all you have to do is get the little things to take it from an A to an A+, IMO.

Don't throw the baby out with the bath water!

 

[jsfricks]

I agree, you have a great grouping there. It shouldn't be a problem trading even for the correct SAT and not too hard getting the correct paperwork. Definitely not worth selling the gun because of this.

 

[peepaw]

Very nice package you have there, 100% correct or not.
Very very nice, thanks for sharing.

 

[Hawg Rider]

Very nice set! Getting rare...

I've been searching for an early Model 29 package just like yours...but haven't seen many here in Florida. The one or two that I have seen have been way out of my price range: $3800-$4000+. Getting into the Python realm of pricing! Coke stocks alone are now selling for $400-$500 if you can find them. Very nice package you have there, treasure it!

 

[gjamison]

I may have an orginal SAT. Will look and swop even up if you want.

 

[Mickey D]

I usually don't say this to men but, nice package.

 

[pharmer]

I've been searching for an early Model 29 package just like yours...but haven't seen many here in Florida.

A tale of woe. About 2 years ago my "garage sale guy" came across a widow with a complete package in like new condition. In the time it took him to call me a mutual acquaintance came along and talked her down to $150 from the original $200. I caught up to him next day but he was beating his chest over selling it for $800. I figured I could have dropped a grand on him, gone back and dropped $850 on the widow and pocketed $500+ on the sale. Joe

 

[wwonka365]

What a whiner I've been, I'll find the correct screwdriver and instructions.
And, then it's all good. Thanks for all of the posts, support and advice. I also have another three screw Model 29 with a set of mint diamond "Coke Bottle" grips. Back in the day I did shot this gun and liked the way the "cokes" felt in my hand better than the originals. Wasn't smart enough, in the day, to keep the originals. If I look for a pair of originals is there anything special I need to be aware of. The three screw gun, an "N" serial number, is from around 1971. BTW, I was going to shoot the 5-screw gun and the owner of the gun store said I shouldn't. That's why I have the three screw gun. He was a great guy to advise me of that. Back then I hadn't a clue. Thanks again.

 

[jsfricks]

I was going to shoot the 5-screw gun and the owner of the gun store said I shouldn't. That's why I have the three screw gun. He was a great guy to advise me of that. Back then I hadn't a clue. Thanks again.

If it has evidence of shooting in the past, wear on the ejector Rod, backplate, etc., then shooting it some and taking good care of it won't hurt it. It was shot at the factory. But if there's no evidence of outside the factory shooting the I would just relegate myself to shooting the other one.

 

[hjdca]

Wow, that is a fantastic 29 ! A real treasure.. If you have time, we would love to see close up pics of both sides of the gun, so, we can admire that gorgeous first year unblemished finish !